Quantum chemical mass spectrometry: ab initio prediction of electron ionization mass spectra and identification of new fragmentation pathways

The electron ionization mass spectra of four organic compounds are predicted based on the results of quantum chemical calculations at the DFT/B3LYP/6‐311 + G* level of theory. This prediction is performed ‘ab initio’, i.e. without any prior knowledge of the thermodynamics or kinetics of the reactions under consideration. Using a set of rules determining which routes will be followed, the fragmentation of the molecules' bonds and the complete resulting fragmentation pathways are studied. The most likely fragmentation pathways are identified based on calculated reaction energies ΔE when bond cleavage is considered and on activation energies ΔE^? when rearrangements are taken into account; the final intensities of the peaks in the spectrum are estimated from these values. The main features observed in the experimental mass spectra are correctly predicted, as well as a number of minor peaks. In addition, the results of the calculations allow us to propose fragmentation pathways new to empirical mass spectrometry, which have been experimentally verified using tandem mass spectrometry measurements. Copyright © 2016 John Wiley & Sons, Ltd.     

A New Method for Assessment of Performing Mechanical Works of Energetic Compounds by the Cylinder Test

A new method is introduced for assessment of performing mechanical works of energetic compounds by cylinder wall velocities of CHNOFCl energetic compounds on the basis of the cylinder test. Four suitable decomposition paths are used to evaluate the number of moles of gaseous detonation products per gram of explosive, the average molecular weight of these gases, and the heat of detonation in calories per gram by considering different decomposition products HF, HCl, CO, N₂, H₂O, H₂, and CO₂. For CHNO and fluoro energetic compounds, the predicted cylinder wall velocities of these compounds give more reliable results than one of the best available empirical methods. The predicted root mean square (rms) deviations of cylinder wall velocities of the new model for some chloro explosives at actual radial expansions 0.6 and 1.9 mm are 0.010 and 0.062 km · s^–1, which show high reliability of the new method.     

Molecular dynamics simulation and density functional theory insight into the cocrystal explosive of hexaazaisowurtzitane/nitroguanidine

Theoretical methods involving molecular dynamics (MD) simulation and density functional theory were performed to investigate the different molecular ratios, mechanical Properties, structure, trigger bond, and intermolecular interaction of hexaazaisowurtzitane (CL‐20)/nitroguanidine (NQ) cocrystal explosive. Results of MD simulation show that CL‐20 and NQ packed in ratios of 1:1 present the larger binding energy and better mechanical properties than any other molecular ratios, which indicates 1:1 cocrystal can form the stable crystal structure. Shorter length and larger dissociation energy of trigger bond in composite structure than in isolated CL‐20 component suggests that the cocrystal may exhibit less sensitive than CL‐20. Analyses of atoms in molecules, reduced density gradient, and natural bond orbital confirm that intermolecular interactions are mainly derived from a series of weak hydrogen bond and strong vdW forces, involving of NH···O, CH···O, CH···N, O···N, and O···O. Additionally, composite structures of 2 and 3 bringing us more attractive performance will act as a key role in constructing of CL‐20/NQ cocrystal explosive. © 2015 Wiley Periodicals, Inc.     

Influence of modified mesoporous silica SBA‐15 on the flammability of intumescent high‐density polyethylene

This work aims to investigate the fire retardant properties of a novel type of high‐density polyethylene composites. Our intumescent system consists in using classical flame retardants such as ammonium polyphosphate, pentaerythritol in combination with porous mesostructured silica (SBA‐15) fillers. Prior to use, SBA‐15 was chemically modified using different organic and inorganic grafts in order to obtain some specific properties, such as an improved compatibility with the polymer, or different types of surface acidity in order to increase charring reactions. Limiting oxygen index, UL‐94, pyrolysis flow combustion calorimetry and thermogravimetric analysis were used to assess the burning behavior and thermal stability, respectively, of the processed composites. By keeping the total amount of additives always equal to 25 wt%, the better flammability characteristics were in general obtained at low SBA‐15 loadings (<2 wt%). X‐ray diffraction and Fourier transform infrared spectroscopy analyses of the residues showed that the formation of a barrier mainly constituted by crystalline silicon phosphates is probably a key to enhance the fire properties. Further slight improvements brought by the surface modification of SBA‐15 nanofillers are discussed according to type of incorporated particles. Copyright © 2016 John Wiley & Sons, Ltd.     

Poly(glycidyl methacrylate)‐grafted hydrophobic charge‐induction agarose resins with 5‐aminobenzimidazole as a functional ligand

Hydrophobic charge‐induction chromatography is a new technology for antibody purification. To improve antibody adsorption capacity of hydrophobic charge‐induction resins, new poly(glycidyl methacrylate)‐grafted hydrophobic charge‐induction resins with 5‐aminobenzimidazole as a functional ligand were prepared. Adsorption isotherms, kinetics, and dynamic binding behaviors of the poly(glycidyl methacrylate)‐grafted resins prepared were investigated using human immunoglobulin G as a model protein, and the effects of ligand density were discussed. At the moderate ligand density of 330 μmol/g, the saturated adsorption capacity and equilibrium constant reached the maximum of 140 mg/g and 25 mL/mg, respectively, which were both much higher than that of non‐grafted resin with same ligand. In addition, effective pore diffusivity and dynamic binding capacity of human immunoglobulin G onto the poly(glycidyl methacrylate)‐grafted resins also reached the maximum at the moderate ligand density of 330 μmol/g. Dynamic binding capacity at 10% breakthrough was as high as 76.3 mg/g when the linear velocity was 300 cm/h. The results indicated that the suitable polymer grafting combined with the control of ligand density would be a powerful tool to improve protein adsorption of resins, and new poly(glycidyl methacrylate)‐grafted hydrophobic charge‐induction resins have a promising potential for antibody purification applications.     

Iodine-poly(2-vinylpyridine-co-styrene-co-divinylbenzene) charge transfer complexes with antibacterial activity

In this work, we have developed three different copolymers based on 2-vinylpyridine, styrene and crosslinked with divinylbenzene (10-30 mol%). The copolymers were morphologically and chemically characterized by apparent density, swelling degree, elemental analysis, Fourier transform infrared spectrophotometry and optical microscopy. The formation of iodine complexes with these copolymers was carried out by two different procedures: with solvent, or not. The influence of the copolymers structure on the capacity of anchoring iodine has been investigated. The antibacterial properties of polymeric charge transfer complexes were determined towards 10³-10⁷ cells/mL dilutions from the auxotrophic AB1157 Escherichia coli strain.     

Charge transport properties in microcrystalline KDyFe(CN)6

Microcrystalline solid dysprosium(III) hexacyanoferrate(II) was synthesized by co-precipitation in aqueous solution. The resulting solid has been studied by Fourier transform infrared spectroscopy, X-ray analysis and solid state electrochemistry. The use of a cavity microelectrode was necessary to explore a wide range of time scale and minimize the (undesired) capacitive currents. Cyclic voltametric experiments were very helpful to understand the kinetic of charge transfer in such microstructure. A structure-properties relationship has been established from the crystallographic and the electrochemical properties. A square-scheme is presented to explain the unique electrochemical behavior of hexacyanoferrate containing dysprosium since this compound exhibits a second redox system. The solid presents an open channel-like morphology in which the motion of charged species occurs during the redox processes. Precisely, the electronic transfer is accompanied by a cation diffusion inside the microcrystalline structure. The size of these channels strongly suggests that the kinetic of charge transfer is limited by the cation transport into these structures.     

Charge compensation and oxidation in NaxCoO2−δ and LixCoO2−δ studied by XANES

A comparative study on the oxidation and charge compensation in the A_xCoO_2−δ systems, A=Na (x=0.75, 0.47, 0.36, 0.12) and Li (x=1, 0.49, 0.05), using X-ray absorption spectroscopy at O 1s and Co 2p edges is reported. Both the O 1s and Co 2p XANES results show that upon removal of alkali metal from A_xCoO_2−δ the valence of cobalt increases more in Li_xCoO_2−δ than in Na_xCoO_2−δ. In addition, the data of O 1s XANES indicate that charge compensation by oxygen is more pronounced in Na_xCoO_2−δ than in Li_xCoO_2−δ.     

Effects of Neutron Irradiation on Superconducting Properties of GdBa2Cu3O7-δ Single Domain Superconductor

The effects of neutron irradiation with a fluence of 1015 n/cm2 on the superconducting properties of GdBa2Cu3O7-δsingle domain sample were studied. The point and cascade defects produced by the neutron irradiation were observed by high-resolution transmission electron microscopy. The cascade defects were found to have the sizes of about 4-7 nm which is comparable to the coherence lengths of high temperature superconductors. The point defects disappear while the cascades still exist through thermal annealing. The temperature dependence of magnetization for the magnetic field parallel to the crystallographic c axis shows that the neutron irradiation leads to a dramatic degradation of uperconductivity for the as-irradiated sample, a decrease of critical current density (Jc), and the weakening of the fishtail effect in the Jc versus magnetic induction B curve. However, for the as-irradiated sample annealed in the flowing oxygen atmosphere, it shows that Jc under high magnetic fields is greatly enhanced, the fishtail shifts towards higher magnetic fields, and its superconductivity is partially recovered as well due to the remaining effecive pinning centers of the cascades. These results suggest a prospective application for such a treated GdBa2Cu3O7-δsuperconductor.     

含Ce水滑石基复合氧化物对混合染料的光催化性能

将具有光催化活性的Ce O_2和锌锡水滑石进行复合,经焙烧得到光催化性能较高的Ce O_2/Zn O/Sn O_2复合氧化物。通过X射线粉末衍射(XRD)、扫描电子显微镜(SEM)、透射电子显微镜(TEM)和紫外-可见漫反射图谱(UV-Vis DRS)技术对样品的晶体结构、表面形貌和光学性能进行表征,并利用密度泛函理论(DFT)计算样品的态密度,分析其电子能态结构。以甲基橙(MO)和亚甲基蓝(MB)的混合溶液(C_(MO)∶C_(MB)=1∶1)模拟染料废水,研究Ce O_2含量和焙烧温度对复合氧化物光催化降解混合染料的影响。结果表明:随着Ce O_2含量和焙烧温度的增加,复合氧化物的结晶度及对MO和MB的光催化活性得到增强;同时,复合氧化物对混合染料中MO的降解率优于MB。其中Ce O_2含量为20%,焙烧温度为700℃时的复合氧化物表现出最佳的光催化性能,对混合染料中MO和MB的降解率分别达到96.7%和95.0%。结合实验结果和理论计算,推测了混合染料中MO和MB的降解路径。