Synthesis of new colloidal formations during the strengthening of different activated hydrated metallurgical slags

This paper reports on a comparison of experimental researches on the hydration hardening of different types of dumped ferrous slag (DFS) (blast furnace, open hearth, electric steel and converter), non-activated and activated with small (2%) additions of Portland cement or lime. Activation was found to accelerate the strengthening processes in the early stages of hydration resulting from the growth of colloidal sol–gel new formations in a more alkaline environment. Over time, these formations became denser and transformed into stone-like amorphous materials with a uniaxial strength of up to 47.6 MPa at 1 year of age. All these types of slag can, therefore, be used in different applications, for example, like traditional binders, such as Portland cement, to different ceramic goods, new construction materials, etc. But till now the results of this research were used only for the preparing of binder materials for natural soils strengthening as road bases in Russia. Highways whose roadbeds were built with these DFS as binder materials have shown excellent performance indices in different parts of Russia, including Siberia and northern regions.     

Parameter identification of thermophilic anaerobic degradation of valerate

The considered mathematical model of the decomposition of valerate presents three unknown kinetic parameters, two unknown stoichiometric coefficients, and three unknown initial concentrations for biomass. Applying a structural identifiability study, we concluded that it is necessary to perform simultaneous batch experiments with differenitial conditions for estimating these parameters. Four simultaneous batch experiments were conducted at 55°C, characterized by four different initial acetate concentrations. Product inhibition of valerate degradation by acetate was considered. Practical identification was done optimizing the sum of the multiple determination coefficients for all measured state viariables and for all experiments simultaneously. The estimated values of kinetic parameters and stoichiometric coefficients were characterized by the parameter correlation matrix, the confidence interval, and the student's t-test at 9% significance level with positive results except for the saturation constant, for which more eperiments for improving its identifiability should be conducted. In this article, we discussekinetic parameter estimation methods.     

Calorimetric studies of refractory corundum

Calorimetry has been used in the investigations of calcium aluminate materials produced as a binder for aluminate-corundum composites of high refractoriness. The kinetics and of hydration process was thus characterized and the optimum compositions of initial binders and cement-corundum refractory filler blends could be selected for further tests. The acceleration of heat evolution - the shortening of so-called induction period and relatively high heat output in the presence of corundum was observed. It means the acceleration of hydration process, that is early crystallisation of hydration products and subsequent further dissolution of initial anhydrous aluminate phases. In the presence of fine grained corundum particles these phenomena should be attributed to the nucleating effect of fine corundum particles. This revised version was published online in July 2006 with corrections to the Cover Date.     

Electrochemical response of ascorbic acid at conducting and electrogenerated polymer modified electrodes for electroanalytical applications: a review

The present short review deals with electroanalytical aspects of electrochemical response of ascorbic acid (Vitamin C) at conducting and electrogenerated polymer modified electrodes. Two main topics are considered: (i) electrocatalytic oxidation of ascorbate at conducting polymer modified electrodes, leading to electroanalytical techniques for ascorbate assay, and (ii) retardation of ascorbate penetration through a layer of electrogenerated polymers, leading to permselective coatings and their diverse uses, especially for biosensing devices.     

四甲基对联苯二胺光敏化聚苯乙烯砜及其模型化合物二苄基砜分解机理的研究

N、N、 N’、N’-四平基对联苯二胺(NTMB)和 3、3’、5、5’-四甲基对联苯二胺(TMB)可以有效地光敏化二苄基砜(DBS)分解和聚苯乙烯砜(PSS)降解。敏化作用是按电子转移机理进行的,电子转移过程可以由NTMB的单重激发态,也可以由三重激发态发生。由三重态电子转移产生的三重态离子自由基对进一步反应生成产物的效率比单重态离子自由基对的效率高10倍。     

Fermentation characteristics and the dynamic trend of chemical components during fermentation of Massa Medicata Fermentata

As a representative of traditionally fermented Chinese medicine, Massa Medicata Fermentata (MMF) shows the functions of invigorating the spleen and stomach and promoting digestion, which plays an important role in the treatment of gastrointestinal diseases. The fermentation mechanism and the key factors that affect the quality of MMF have not been revealed yet, which has become an urgent issue that limits its clinical application. This article aims to systematically and comprehensively reveal the transformation of physical properties and the dynamic trend of chemical components including substrate components, volatile components, and lactic acid as anaerobic fermentation product during MMF fermentation. Along with obvious hyphae growth observed for MMF, the weight of MMF decreased, and the moisture and temperature increased. Through the quantified 14 components from substrate, ferulic acid increased from 45.53 ± 6.94 to 141.89 ± 78.40 μg/g, while glycosides and phenolic acids declined except caffeic acid. Also, within the 66 volatile components analyzed, alcohols and acids increased, while aldehydes and ketones decreased. Lactic acid was not detected in the fermentation substrate, but an apparent increase in lactic acid content was observed along with the increased fermentation days, resulting in 2.54 ± 0.15 mg/g on day 8. Based on the tested components, the fermentation process of MMF was discriminated into three distinct stages by principal component analysis, and an optimal fermentation time of four days was proposed. The results of this study will be of great significance to clarify the characteristics of fermentation and conduce to improving quality standards of MMF.     

Influence of Some Aggressive Media on Corrosion Resistance of Mortars With Spent Cracking Catalyst

The influence of spent catalyst from catalytic cracking in fluidized bed on the hydration process of cement and the properties of cement mortars were studied. The spent catalyst was used as an additive to cement in the mortars (10 and 20% of cement). The samples of mortars kept in water for28 days, then they were placed in sulfate and chloride media for 2 months (the control samples were kept in water for 3 months). After this time they were subjected to bending strength and compressive strength determinations. Thermogravimetric and infrared absorption studies were performed and capillary elevation, capability of binding heavy metals, and changes in mass and apparent density were determined too. The studies disclosed the pozzolana nature of spent catalyst and its influence on cement mortars being in contact with corrosive media. This revised version was published online in August 2006 with corrections to the Cover Date.     

The energies of dissociation of the N—O bonds in pyridine 1-oxide derivatives

The enthalpies of combustion of some pyridine derivatives in the solid state have been measured by precision bomb calorimetry, and their enthalpies of formation have been calculated. The enthalpies of sublimation of these compounds have been determined from the experimental temperature dependences of saturated vapor pressure using the Clausius-Clapeyron equation. The enthalpies of combustion, formation, and sublimation are the following (kJ mol^–1): -3360.9±2.1, -0.5±2.1, and 79.1±1.3, respectively, for 4-methylpyridine 1-oxide; -2551.0±1.7, 11.7±1.7, and 89.1±2.5, respectively, for 4-nitropyridine 1-oxide;-2355.6±1.3, 102.1±1.3, and 106.3±2.9 for 2,4,6-trinitropyridine 1-oxide; and -2287.6±1.3, 34.3±1.3, and 101.7±2.9 for 2,4,6-trinitropyridine. The enthalpies of formation in the solid state and the enthalpies of sublimation of pyridine derivatives obtained together with the literature data allowed the energies of dissociation of the donor-acceptor N—O bonds in pyridine 1-oxides to be calculated.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 4, pp. 660–662, April, 1995.     

Excess enthalpies of solution of some primary and secondary alcohols in sodium dodecylsulfate micellar solutions

The exces enthalpies of solution of some primary and secondary alcohols in aqueous sodium dodecylsulfate micellar solutions were measured and the results were explained by considering the distribution of alcohols between aqueous and micellar phases. The distribution constant and the enthalpy of transfer (and the standard free energy and entropy of transfer) were obtained. The thermodynamic parameters for the transfer of secondary alcohols from the aqueous to the sodium dodecylsulfate (NaDS) micellar phase differ slightly from those of the corresponding primary alcohols. For both series of alcohols the additivity rule holds for free energies of transfer whereas enthalpies and entropies display convex curves. The present data are compared to those for the transfer of the same solutes from the aqueous to the dodecyldimethylamine oxide (DDAO) and dodecyltrimethylammonium bromide (DTAB) micellar phases. The role of the hydrophilic interactions between the OH group and the micelles' head groups is formulated. The thermodynamics of the branched methyl group were determined. Furthermore, the thermodynamics of solvation of primary alcohols in water, in NaDS micelles, and in octane have been calculated using reference states based on the assumption that the empty space around alcohols in the initial and final states is the same. It is shown that the solvation of alcohols in NaDS micellar phase is enthalpy driven and that the thermodynamic properties of solvation vs. the length of the alcohol tail is the same for water and NaDS micelles whereas it is different for octane. A possible explanation for this difference is that the alkyl chain of alcohols folds in octane.     

Superoxes,high temperature universal phases in (GC)2

Most of the common classes of organic compounds chromatograph normally on Superoxes. There is no tailing or adverse effect from excessively different activity different activity coefficients. Superoxes are therefore universal phases for gas chromatography. This is also expressed by a wide useful temperature range from ～50° to ～300°. High MW Superox-4 has a MAOT about 20° higher than the lower MW Superox-0.1. Several applications illustrating the versatility of Superox phases in (GC)² are presented.