Polymerization of vinyl acetate in fatty acids and properties of poly (vinyl alcohols) derived from the poly (vinyl acetates)

Polymerization of vinyl acetate (VAc) in various fatty acids (carbon numbers 4–18) was carried out. Chain transfer constants to the acids were determined to be 20–35×10^–4, from which the constant to a methylene group was obtained to be 0.73×10^–4. Viscometry in aqueous solution of derived poly (vinyl alcohol) (PVA) showed the usual behavior in terms of Huggins constant obtained by the Schulz–Blaschkes equation for PVAs derived from fatty acid systems lower than hexadecanoic acid. PVA derived from octadecanoic acid system showed abnormality, indicating association of alkyl groups. Contact angles on surfaces of PVAs cast from aqueous solutions were measured. While those of PVA derived from lower acid systems were 62°, those of PVAs derived from higher aids were higher and increased to 92° with increase in carbon number to octadecanoic acid. Alkyl groups in the PVAs were estimated to appear on the surfaces. Surface tension of aqueous solution of the PVA derived from octadecanoic acid showed high surface activity, and depended on pH of the solution, indicating the presence and cleavage of lactone ring at the combined portion between PVA and the acid.     

聚对苯二甲酸乙二醇酯和聚对苯二甲酸丁二醇酯化学扩链反应

综述了用于聚对苯二甲酸乙二醇酯（ＰＥＴ）、聚对苯二甲酸丁二醇酯（ＰＢＴ）化学扩链反应的羧基加成型和羟基加成型扩链剂，以及缩合型扩链反应、羧基加成型扩链反应和羟基加成型扩链反应、羧羟基同时加成型扩链反应。讨论了扩链反应、反应特性和扩链产物的性能，并简要介绍了国内研究概况。参考文献２０篇。     

大分子引发－转移－终止剂

大分子引发－转移－终止剂杨文君，李俊柏，沈家骢（青岛化工学院橡塑工程研究所，青岛，２６６０４２）（吉林大学化学系，长春，１３００２３）关键词聚苯乙烯，聚丙烯酰胺，嵌段共聚，扩链反应，引发－转移－终止剂含有二乙基二硫代氨基甲酸基的有机硫化物或大分子，在...     

Ti-47Al-1.2Ce合金显微组织及稀土相

ＴｉＡ1金属间化合物以其低密度 ,高比强度和比弹性模量 ,良好的抗蠕变及抗氧化能力等特点 ,已成为航天、航空、能源及汽车工业极具竞争力的高温结构材料。虽然ＴｉＡｌ基合金有众多优点 ,但仍存在室温塑性较低、成形性差、性能不平衡等问题 ,还需要深入研究ＴｉＡｌ基合金的合金化及制备工艺等方面技术 ,以此来控制并改善合金的显微组织 ,提高ＴｉＡｌ基合金的综合性能[1～ 4 ] 。合金化是改善ＴｉＡｌ基合金显微组织和性能的重要途径之一 ,通常添加的合金元素有Ｖ ,Ｃｒ ,Ｎｂ ,Ｗ ,Ｍｏ ,Ｓｉ ,Ｂ等[5～ 7] 。稀土元素一般被用来细化材料…     

Mechanical properties of clay‐reinforced polyamide

Intercalated and exfoliated nanocomposites were prepared by extrusion and injection of polyamide‐6 and highly swollen or slightly swollen montmorillonite, respectively. The microstructure of the nanocomposites has been studied previously. In this article, we investigated the influence of the preferential orientation of the montmorillonite sheets on the mechanical properties of the nanocomposites. Dynamic mechanical analysis and tensile tests showed that the elastic modulus depends mainly on the filler loading. A parallel coupling could well account for the behavior of the nanocomposites. The calculated elastic and storage moduli of montmorillonite were set to 140 and 40 GPa, respectively. Compression tests were performed to study the anisotropy of the mechanical properties. The elastic modulus and flow strain were sensitive to the filler orientation. A Tandon–Weng approach was applied to consider the geometry of the filler. In all low‐deformation tests, no significant difference between intercalated and exfoliated systems was observed. Finally, the influence of the dispersion and exfoliation state of the filler on the ultimate properties of the nanocomposites (tensile tests) is discussed. © 2001 John Wiley & Sons, Inc. J Polym Sci Part B: Polym Phys 40: 272–283, 2002     

Synthesis and properties of niobia films derived from niobium pentaethoxide

The hydrolysis of niobium pentaethoxide precursor in the presence of triethylamine (TEA) is discussed. Three precursors with TEA/Nb(OEt)₅ mole ratios of 0.25, 0.4 and 0.8 were prepared. Niobia colloids with different appearance were obtained after autoclaving the above precursors at 250°C during 12 h. The surface roughness and microstructure of niobia films prepared with the colloids by spread coating method are strongly dependent on the TEA/Nb(OEt)₅ mole ratio. At a value of 0.4 TEA/Nb(OEt)₅ mole ratio, a niobia film with large surface roughness can be achieved. It is opaque and mechanically stable and has differently ordered needle microstructure. The crystalline structure and photoelectrochemical property of niobia film with the largest surface roughness were examined. The effect of CO₂ gas bubbling, reflux and addition of 2-methoxyethanol on the hydrolysis of Nb(OEt)₅ and the nature of the Nb₂O₅ films is also discussed.     

Synthesis and properties of coumarin-derived organogelators

A new family of coumarin derivatives containing amide group with different alkyl chain lengths was synthesized and their properties as organogelators were evaluated. It was found that the organogelation abilities were not obviously affected by the alkyl spacer length of amide group. Helical morphologies formed either in nonpolar or high polar solvents by most of the gelators. Occurrence of reversible and stereoselective photodimerization of the gel formed by 4-(7′-coumarinoxy)-N-octadecylbutanamide (3a) in cyclohexane was confirmed by ¹H NMR, UV absorption, and fluorescence spectra. The photoreaction of the gel proceeded without any dissolution, but the drastic microscopic changes of gel morphologies accompanied with the irradiation were identified using SEM and AFM investigations.     

Rapid Synthesis of Nanocrystalline TiO2/SnO2 Binary Oxides and Their Photoinduced Decomposition of Methyl Orange

A rapid and simple method, the so-called stearic acid method (SAM) was developed to prepare nanostructured TiO₂/SnO₂ binary oxides by combustion of stearic acid precursors. The preparative process was studied by Fourier transform infrared spectroscopy (FT-IR). During the preparative process, metal precursors were dispersed in stearic acid at molecular level. Microstructure of the samples was investigated by X-ray diffraction (XRD), transmission electron microscopy (TEM), BET specific surface area measurement and the results were compared with those obtained by conventional sol-gel method. The photocatalytic decomposition of methyl orange was used as a model system to determine the relative influences of the preparation method and the concentration of SnO₂ on the photocatalytic activities. It was found that preparative methods affected the crystalline structure of TiO₂/SnO₂ powders and the anatase phase of TiO₂ was stabilized by the addition of SnO₂ in SAM. The samples prepared by SAM showed better dispersity, larger specific surface area and the TiO₂/SnO₂ (r=0.15, SAM) catalyst showed higher photocatalytic activity than Degussa P25.     

聚全氟丙醚油微观结构的研究

聚全氟丙醚油是一种新型的性能独特的润滑油。本实验采用~（１９）Ｆ－ＮＭＲ波谱法，结合~１Ｈ－ＮＭＲ和ＭＳ法，较详细地研究了油品微观结构。由谱线的化学位移和强度归纳出不同链节结构的分布，同时阐明了端基结构。     

Kinetics of radical telomerization of vinylidene fluoride in the presence of CCl3Z chain transfer agents

The kinetics of radical telomerization of VDF at 141 °C, initiated by ditertbutylperoxide, in the presence of three chain transfer agents (CTAs), HCCl₃, CCl₄ and CCl₃Br, are presented. The values of the chain transfer constants were assessed as 35, 0.25 and 0.06 at 141 °C for CCl₃Br, CCl₄ and HCCl₃, respectively. The values of the degree of polymerization (DP_n) were obtained for each CTA and were compared for the same CTA concentration. Hence, CCl₃Br behaved as an efficient CTA towards VDF and usually afforded the monoadduct selectively, but in certain conditions the VDF diadduct can also be produced. In contrast, HCCl₃ was not so efficient since a polymeric structure was identified as the major product.