聚N,N-双水杨醛乙二胺合钴修饰超微电极的制备及其在一氧化氮测定中应用的研究

通过电化学聚合法制备了聚Ｎ，Ｎ－双水杨醛乙二胺合钴［ｐｏｌｙＣｏ（Ｓａｌｅｎ）］修饰超微电极，研究了该修饰电极的电催化性质及其在一氧化氮（ＮＯ）测定中的应用．实验结果表明，ｐｏｌｙＣｏ（Ｓａｌｅｎ）修饰超微电极对ＮＯ的测定有高的灵敏度，ＮＯ的浓度在２．０×１０－８～２．８×１０－６ｍｏｌ／Ｌ范围内，电流与浓度呈良好的线性关系，线性相关系数为０．９９９８，检出限为１．０×１０－８ｍｏｌ／Ｌ；该电极进一步修饰Ｎａｆｉｏｎ后，生物体中常见的物质如抗坏血酸、儿茶酚胺类神经递质的代谢物、ＮＯ的氧化产物ＮＯ－２等不干扰测定．本传感器可以满足ＮＯ在体分析的需要．     

氧化物担载铑原子簇催化剂的金属载体相互作用的考察——Ⅱ.金属载体非强相互作用

本文用XPS从Rh_4(CO)_(12)在真空条件下的脱羰过程和在氢氧中的还原过程两方面考察了一些非还原性氧化物担载Rh_4(CO)_(12)催化剂的金属载体相互作用,并把这种相互作用称为金属载体非强相互作用(non-strong metal-support interaction,缩写NSMSI).结果表明,铑与一些载体的非强相互作用的顺序是MgO>ZrO_2>γ-Al_2O_3>SiO_2-Al_2O_3≈SiO_2;Rh与载体的非强相互作用形成Rh—O键,使Rh的还原性减弱;形成M—O键是产生NSMSI效应的重要特征;这种相互作用能增加铑羰基物的稳定性,使其在真空中脱羰速率减慢.铑与非还原性氧化物载体间的非强相互作用可用酸-碱机制解释.     

Nd（naph）_3－Al（i－Bu）_3催化马来酸酐和环氧丙烷交替共聚合

研究了马来酸酐和环氧丙烷的交替共聚，发现Ｎｄ（ｎａｐｈ）＿３－Ａｌ（ｉ－Ｂｕ）＿３是马来酸酐（ＭＡｎ）和环氧丙烷（ＰＯ）交替共聚的良好催化剂．用红外光谱、核磁共振研究了共聚物的结构．共聚反应动力学研究表明共聚反应与单体和催化剂浓度均呈一级关系．表观活化能为１１３ｋＪ／ｍｏｌ．     

HZSM-5分子筛负载CuO/Bi2O3催化合成丁炔二醇研究

用浸渍法混合负载制备一种复合氧化物催化剂CuO/Bi2O3/HZSM-5,用XRD,TPR,TG/DTA等分析手段对催化剂的理化性能进行表征.催化活性实验结果表明该催化剂对甲醛乙炔反应制取丁炔二醇具有制备简单、成本低、活性好的特点.     

Fe3O4/TiO2 纳米材料靶上脱盐的基质辅助激光解析/电离质谱新方法研究

建立了一种简便、高效的靶上脱盐新方法。利用Fe3O4/TiO2磁性纳米材料对肽段的吸附作用,将其作为载体用于靶上肽段富集和脱盐。在对纳米材料使用量、浸洗条件进行优化的基础上,成功地鉴定了溶于10mol/L尿素溶液的100fmol的肌红蛋白样品,也对溶于3mol/L尿素溶液中的10fmol的肌红蛋白样品进行了成功地分析鉴定。通过对肌红蛋白样品进行预处理和质谱分析重复实验,表明该方法重现性好,且简便、高效,所需时间短,一次可同时处理多个样品,易于实现通量化,为有效地解决目前蛋白质组分析中所面临的基质辅助激光解析/离子化飞行时间质谱耐盐性差的问题提供了一种新的手段。     

介孔CeO2负载的Co3O4催化剂催化富氢气体中的CO优先氧化反应

采用溶胶-凝胶法制备出介孔氧化铈(meso-CeO2)及其负载的氧化钴(Co3O4/meso-CeO2)催化剂,并将其应用于富氢气体中CO的优先氧化反应.通过N2物理吸附及X射线衍射表征考察了meso-CeO2和Co3O4/meso-CeO2的结构性质.活性评价结果表明,在高空速下,Co3O4/meso-CeO2催化剂上的CO优先氧化性能很好,但水和CO2对CO的氧化有一定的负作用.Co3O4/meso-CeO2催化剂的CO完全氧化温度窗口远大于沉淀法制备CeO2负载的氧化钴催化剂.     

FCC硫转移剂MgAlCuFe复合氧化物的结构与性能:金属盐前体的影响

分别以硝酸盐、盐酸盐和硫酸盐为金属盐前体,采用共沉淀法合成了MgAlCuFe类水滑石前驱体,经过700℃焙烧6h后,制得三种新型FCC硫转移剂.运用X射线衍射、热重、氮气吸附和红外光谱对这三种硫转移剂的结构和性能进行了表征,并采用改装的WRP-3热重天平评价了其氧化吸硫和还原脱硫的性能.结果表明,三种金属盐均可得到结构规整的类水滑石前驱体,经过焙烧后得到复合氧化物MgAlCuFe.与采用盐酸盐和硫酸盐作前体相比,由硝酸盐制得的硫转移剂具有较大的比表面积,其饱和吸附硫容和氧化吸硫速率均较高,6min可达到1.54g/g的饱和吸附能力,同时具有较强的还原脱硫能力.     

Electroconductivity of the calcium oxide-ethylene glycol-water system

The electroconductivity of calcium oxide-ethylene glycol (EG) and calcium oxide-EG-water systems is measured in wide ranges of temperatures and compositions. With increasing temperature, the conductivity of the former system passes through a maximum, which shifts to lower temperatures with increasing electrolyte concentration. Thermodynamic characteristics of the calcium hydroxy glycolate association in EG are estimated using the Lee-Wheaton equation. The conductivity of the latter system decreases with increasing EG content. Its dependence on the limiting high-frequency conductivity of the mixed solvent is analyzed. The activation energy for conduction in both systems decreases with increasing temperature and electrolyte concentration.     

Calcined Ni—Al layered double hydroxide as a catalyst for total oxidation of volatile organic compounds: Effect of precursor crystallinity

The effect of hydrothermal treatment on properties (crystallinity, porous structure, reducibility, acidity, basicity, and catalytic activity and selectivity in toluene and ethanol total oxidation) of Ni—Al layered double hydroxide precursors and related mixed oxides was examined. The hydrothermal treatment increased considerably both the content of crystalline phase and LDH crystallite size. On the other hand, only a slight effect of the precursor hydrothermal treatment on crystallinity of the related Ni—Al mixed oxides obtained by calcination at 450°C was observed. The reducibility of NiO particles appeared to be hindered considerably compared to the reducibility of pure NiO. Catalytic activity of the Ni—Al mixed oxides prepared from the precursors hydrothermally treated for a short time (4 h) was the highest. The highest amount of acetaldehyde formed during the total oxidation of ethanol, i.e. the worst selectivity was found for the calcined Ni—Al LDH without hydrothermal treatment. Presented at the 33rd International Conference of the Slovak Society of Chemical Engineering, Tatranské Matliare, 22–26 May 2006.     

Synthesis and characterization of LiCo<Subscript><Emphasis Type="Italic">x</Emphasis></Subscript>Mn<Subscript>2−<Emphasis Type="Italic">x</Emphasis></Subscript>O<Subscript>4</Subscript> powder by a novel CAM microwave-assisted sol–gel method for Li ion battery

LiMn₂O₄-based spinels are of great interest as positive electrode materials for lithium ion batteries. LiCo _x Mn_2−x O₄ (x = 0.0, 0.1, 0.2, 0.3, and 0.4) spinel phases have been synthesized by novel citric acid-modified microwave-assisted sol–gel method. The structural properties of the synthesized products have been investigated by X-ray powder diffraction and scanning electron microscopy. To improve the recharge capacity of Li/LiCo _x Mn_2−x O₄ cells, the electrochemical features of LiCo _x Mn_2−x O₄ compounds have been evaluated as positive electrode materials. The structural properties of Co-doped oxides are very similar to LiMn₂O₄ electrode. Techniques like cyclic voltammetry, charge–discharge and cycle life are also used to characterize the LiCo _x Mn_2−x O₄ (x = 0.0, 0.1, 0.2, 0.3, and 0.4) electrodes.