相态结构对聚氧化乙烯/丁二腈/高氯酸锂复合电解质室温电导率的影响

采用聚氧化乙烯(PEO)、丁二腈和高氯酸锂(LiClO4)的复合电解质体系, 制备了一系列不同配比的PEO/SN/LiClO4复合电解质, 对其室温电性能和相态结构进行了表征, 并探讨了相态结构对室温电导率的影响.     

2-甲基-1-(4-芳基噻唑-2-基)-苯并咪唑-6-甲酸乙酯的合成、表征及生物活性

以4-乙酰氨基苯甲酸乙酯为原料设计合成了14 种2-甲基-1-(4-芳基噻唑-2-基)-苯并咪唑-6-甲酸乙酯新化合物. 化合物结构经质谱、1H NMR、红外光谱和元素分析等确证, 并用单晶X射线衍射仪测定了化合物5a的晶体结构. 生物活性实验结果表明, 化合物5c(500 mg/L)对小麦白粉病菌抑制率达到95%; 化合物5e对辣椒疫霉病菌(25 mg/L)的抑制率为61.9%, 对油菜菌核病菌(500 mg/L) 抑制率高达97.2%; 化合物5k(25 mg/L) 对小麦赤霉病菌抑制率为55.1%.     

Synthesis, Crystal Structure, Physical Properties, and Application of a Series of Functional Dibenzo[d,f][1,3]dioxepine Derivatives

The twisted aromatics, functional dibenzo[d,f][1,3]dioxepine derivatives were synthesized in high yields from reactions of 5,5＇-dibromo-2,2＇-biphenol with corresponding ketal or ketone compounds under acid catalysis. The structures of these compounds were characterized by ^1H NMR, elemental analysis, UV-Vis absorption spectrum and X-ray diffraction analysis. The conformation of O--C--O bridged biphenyl derivatives with varied substitute groups on 6,6＇-position was studied by X-ray crystallography and force-field simulation. The result of calculations by UNIVERSAL 1.02 force field in Cerius2 package（4.6） indicates that dibenzo[d,f][1,3]dioxepine derivatives show twisted conformations and the twisted angle between the phenyl rings is about 40°, which is accordant with the result from crystal structure determination, though the obtained angles in the crystal of dibenzo[d,f][1,3]dioxepine derivatives with the varied substitute groups on 6,6＇-position are shown to be slightly shifted to 40° owing to intermolecular interactions in crystal stacking. DSC studies exhibit that the substitute groups on 6,6＇-position can induce a large variation of endothermic peaks ranging from 80 to 135 ℃. The conjugated polymers based on dibenzo[d,f][1,3]dioxepine derivatives, which have ultraviolet emitting with a quantum efficiency of 10%, were obtained by Yamamoto coupling.     

Orbital-Free Density Functional Theory for Molecular Structure Calculations

We give here an overview of the orbital-free density functional theory that is used for modeling atoms and molecules.We review typical approximations to the kinetic energy,exchange-correlation corrections to the kinetic and Hartree energies, and constructions of the pseudopotentials.We discuss numerical discretizations for the orbital-free methods and include several numerical results for illustrations.     

Improved Stretchable and Sensitive Fe Nanowire-Based Strain Sensor by Optimizing Areal Density of Nanowire Network

Flexible strain sensors, when considering high sensitivity and a large strain range, have become a key requirement for current robotic applications. However, it is still a thorny issue to take both factors into consideration at the same time. Here, we report a sandwich-structured strain sensor based on Fe nanowires (Fe NWs) that has a high GF (37–53) while taking into account a large strain range (15–57.5%), low hysteresis (2.45%), stability, and low cost with an areal density of Fe NWs of 4.4 mg/cm². Additionally, the relationship between the contact point of the conductive network, the output resistance, and the areal density of the sensing unit is analyzed. Microscopically, the contact points of the conductive network directly affect the sensor output resistance distribution, thereby affecting the gauge factor (GF) of the sensor. Macroscopically, the areal density and the output resistivity of the strain sensor have the opposite percolation theory, which affects its linearity performance. At the same time, there is a positive correlation between the areal density and the contact point: when the stretching amount is constant, it theoretically shows that the areal density affects the GF. When the areal density reaches this percolation threshold range, the sensing performance is the best. This will lay the foundation for rapid applications in wearable robots.     

Structural and Functional Analysis of the Pyridoxal Phosphate Homeostasis Protein YggS from Fusobacterium nucleatum

Pyridoxal 5′-phosphate (PLP) is the active form of vitamin B6, but it is highly reactive and poisonous in its free form. YggS is a PLP-binding protein found in bacteria and humans that mediates PLP homeostasis by delivering PLP to target enzymes or by performing a protective function. Several biochemical and structural studies of YggS have been reported, but the mechanism by which YggS recognizes PLP has not been fully elucidated. Here, we report a functional and structural analysis of YggS from Fusobacterium nucleatum (FnYggS). The PLP molecule could bind to native FnYggS, but no PLP binding was observed for selenomethionine (SeMet)-derivatized FnYggS. The crystal structure of FnYggS showed a type III TIM barrel fold, exhibiting structural homology with several other PLP-dependent enzymes. Although FnYggS exhibited low (<35%) amino acid sequence similarity with previously studied YggS proteins, its overall structure and PLP-binding site were highly conserved. In the PLP-binding site of FnYggS, the sulfate ion was coordinated by the conserved residues Ser201, Gly218, and Thr219, which were positioned to provide the binding moiety for the phosphate group of PLP. The mutagenesis study showed that the conserved Ser201 residue in FnYggS was the key residue for PLP binding. These results will expand the knowledge of the molecular properties and function of the YggS family.     

Regge Models of Proton Diffractive Dissociation Based on Factorisation and Structure Functions

Recent results by the authors on proton diffractive dissociation (single, double and central) in the low-mass resonance region with emphasis on the LHC kinematics are reviewed and updated. Based on the previous ideas that the contribution of the inelastic proton–Pomeron vertex can be described by the proton structure function, the contribution of the inelastic Pomeron–Pomeron vertex appearing in central diffraction is now described by a Pomeron structure function.     

聚合物气体辅助注射成型制品的形态结构

作为一种由常规注射成型发展起来的聚合物加工技术,气体辅助注射成型具有节约原材料、缩短成型周期以及提高制品性能等优点,已得到广泛的应用.由于气辅成型过程是一个在刚、柔双重约束界面条件下进行的多相复杂体系的多次流动过程,因而其形态结构的形成、发展和演化要远比常规注塑成型复杂.然而在气辅成型的形态结构方面,国内外的研究一直以来开展得较少.近年来,作者在聚合物及其共混物、复合材料气辅成型制品的形态结构方面已开展了广泛的研究工作,本文对这些工作和一些重要结果作了总结,并简要分析了成型过程中剪切场对形态演化的影响,最后对该研究方向的发展趋势作了展望.     

HIGH-FREQUENCY VIBRATIONS OF CORRUGATED CYLINDRICAL PIEZOELECTRIC SHELLS

Coupled extensional and flexural cylindrical vibrations of a corrugated cylindrical piezoelectric shell consisting of multiple pieces of circular cylindrical surfaces smoothly connected along their generatrix are studied. To validate the results for the case of relatively thick shells or equivalently high-frequency modes with short wavelengths, existing analysis is extended by considering shear deformation and rotatory inertia. An analytical solution is obtained. Based on the solution, resonant frequencies and mode shapes are calculated.     

N掺杂对非晶C薄膜的电子结构与光学性质的影响

用直流磁控溅射法制备了非晶C薄膜及N掺杂非晶C(a-C∶N)薄膜,用紫外-可见分光光谱仪、椭圆偏振仪、俄歇电子能谱(AES)等对薄膜进行了检测。结果表明：随源气体中N气含量的增加,透过率和折射率变小, 而光学带隙先增大后减小; 当薄膜中N的含量很少,N的掺入对sp3杂化C起稳定作用,使得薄膜光学带隙E_g增大。而较高量N的掺入抑制了sp3杂化C的形成,提高了薄膜中sp2键含量,使得薄膜光学带隙变小。参数D定义为俄歇电子能谱(AES)中最大正峰和最低负峰之间的距离,用俄歇电子能谱中的D值来计算薄膜的sp2键的百分含量,俄歇电子能谱(AES)表征也表明：较高量的N的掺入抑制了sp3杂化C的形成。所以应该考虑在较低N分压条件下掺N来改善非晶C薄膜的光学性能。