RELATIONSHIPS BETWEEN X—H STRETCHING OVERTONE FREQUENCIES AND BOND LENGTHS/BOND ANGLES

A relationship between the X-H (X = N, O, C, and so on) equilibrium bond length in a Morse oscillator and the X-H stretching overtone frequency shifts is obtained theoretically. We use the equation to discuss the empirical linear relationships that have been proposed for heterocyclics, alkanes and fluorinated benzenes. On the other hand, a unified relationship between the X-H bond angles and the experimental quantities (ω(?) and the coupling strength λ) is also presented for XH2, XH, and XH4 molecules or molecular fragments. Calculations of X-H bond angles for a number of molecules show that the results from our equations are in excellent agreement with the experimental values. Also we can extract the information of relative magnitude of bond coupling force field.     

Synthesis of N-tetrasubstituted cyclam derivatives appended with sulfonyl or sulfinyl groups via aza-Michael addition

Azamacrocycles bearing four arylsulfonyl or arylsulfinyl pendant arms have been synthesised with good yields through nucleophilic addition of 1,4,8,11-tetraazacyclotetradecane (cyclam) to phenylvinylsulfone, phenylvinylsulfoxide or (R)-tolylvinylsulfoxide in isopropanol/water media. The crystal structure of the tetraethylsulfonylphenyl substituted macrocycle has been determined by X-ray crystallography. Preliminary studies of the coordination properties of these functionalised macrocyles towards Cu(II) and Eu(III) indicate that pendant sulfoxide groups act as oxygen donor coordinating groups.     

Capillary electrophoresis separation of heterocyclic nitrosoamino acid-conformers at sub-ambient temperatures

The separation of a selected group of naturally occurring, heterocyclic nitrosoamino acids was achieved by capillary zone electrophoresis and the resolution of the syn and anti conformers improved as the temperature was lowered to 5 °C. The double peaks observed for each nitrosoamino acid are probably caused by the slow kinetics of conformational isomerism. The experimental setup consisted of a P/ACE 5510 electrophoresis system, a 57 cm polyacrylamidecoated capillary, and a 10 mM phosphate buffer, pH 7.2, containing 2 mM of 3-(N-N-dimethylmyristylammonio)propanesulfonate (DMMAPS) and 0.1% Tween 20. Our study shows that (a) the lower the temperature, the greater the resolution and the longer the migration times; and (b) different nitrosoamino acid conformers were resolved at different temperatures because of differences in the rate of isomerization. For example, the conformers of N-nitrosothiazolidine-4-carboxylic acid were partially resolved at 30 °C while those of N-nitrosoproline were well resolved at the same temperature.     

Functionalized naphthol[2,3-h] quinoline-7,12-diones

The addition of secondary and primary amines to ethyl (1-amino-9,10-anthraquinon-2-yl)propynoate affords an easily separable mixture of the corresponding ethyl 3-dialkylaminoor 3-alkylamino-3-(1-amino-9,10-anthraquinon-2-yl)acrylate and 3-dialkylamino- or 3-alkylaminonaphthol[2,3-h]quinoline-2(1H), 7,12-trione (in ∼4: 1 ratio). Intramolecular cyclization of the resulting substituted ethyl acrylates results in the formation of 4-dialkylaminoor 4-alkylamino-2-chlorinated pyridine rings. Subsequent nucleophilic substitution of the chlorine atom gives 2-functionalized 4-dialkylamino- or 4-alkylaminonaphtho[2,3-h]quinoline-7,12-diones. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 11, pp. 2327–2332, November, 1998.     

Modeling and simulation of free radical polymerization of styrene under semibatch reactor conditions

The first part of this approach is concerned with the elaboration of a radical polymerization model of styrenne, based on a kinetic diagram that includes chemical and thermal initiation, propagation, termination by recombination and chain transfer to the monomer. Furthermore, volume contraction during polymerization is considered, as well as the gel and glass effects. The mathematical formalism that describes the model in terms of moments is explored in detail. The model was then used to predict the changes in monomer conversion and molecular weight after intermediate addition of initiator and monomer. The results of this operation are dependent on the conditions of the reaction mass, quantity, and moment of substance addition. Therefore, the simulations were performed at different times with respect to the gel effect; before, during and after this phenomenon, and also with respect to different temperatures and initiators. Increasing the initiator concentration before the gel effect leads to an earlier appearance of the phenomenon and to a decrease in molecular weight. The ratio reveals a polydispersity index smaller for the intermediate addition of initiator. No significant changes take place during or after the gel effect. If along with the initiator, unreacted monomver (used to dissolve the initiator) enters the reactor, a small dip in conversion is observed. The general conclusion of this paper reveals the intermediate addition of initiator as a method to control polymer properties and to prevent the “dead-end” polymerization of styrene.     

Energy transfer between 1,3-dimethylxanthine and europium(III) in aqueous solution

Luminescence of 1,3-dimethylxanthine in solution is impaired owing to collisional deactivation by solvent molecules and matrix interferences. Energy absorbed by 1,3-dimethylxanthine has been transferred to trivalent europium which emits narrow-band radiation in a region distant from background interferences. The enhanced luminescence of trivalent europium was utilized for the determination of 1,3-dimethylxanthine in buffered aqueous solution. An analytically useful range from 1.1 × 10^?5?5.0 × 10^?4 M and a detection limit of 1.1 × 10^?5 M were obtained. The methodology for the analytical procedure was determined.     

Preparation and characterization of Mg(II)-, Ca(II) and Cd(II) complexes of 1,2-ethanediol and water

Mixed ligand complexes of different compositions were prepared with water, sulfate ion and 1,2-ethanediol as ligand. IR spectra and the thermoanalytical curves of the complexes were recorded. Oxygen atoms bound by one or two coordinate bonds to the metal ion, or by hydrogen-bonds in the crystal, were observed. As for the water molecule, 1,2-ethanediol molecules of crystal and monohydrate type were found, depending on the type of binding of the oxygen atoms.This revised version was published online in November 2005 with corrections to the Cover Date.     

19-Electron arenecyclopentadienyl complexes of ruthenium

A series of are necyc lope ntadienyl complexes,i. e., [Ru(⁵-c₅R₅)(⁶- are ne)]⁺ (1, R= H, arene = C₆H₆; 2, R = Me, arme = C₆H₆; 3, R = H, arctic = C₆H₃Me₃; 4, R = Me, arene = C₆H₃Me₃; 5, R = H, arene = C₆Me₆; 6, R = Me, arene = C₆Me₆) was studied by cyclic voltammetry. These compounds are capable of both oxidation and reduction. The reduction potential values depend on the number of methyl groups in the complex. Reduction of benzene complexes I and 2 by sodium amalgam in THF leads to the formation of decomplexation products, the addition of hydrogen to benzene, and dimerization of the benzene ligands. Both chemical and electrochemical reductions of mesitylene complexes3 and4 result in dimeric products [(⁵-C₅R₅)Ru(-⁵;⁵-Me₃H₃C₆H₃Me₃)Ru(⁵-C₅R₅)] (14, R = H; 15, R = Me). The action of sodium amalgam on compound5 gives products of hydrogen addition to both hexamethylbenzene (17) and cyclopentadienyl (18) ligands along with the major product, the dimer [⁵-C₅H₅)Ru(-⁵; ⁵-Me₆C₆C₆Me₆)Ru(⁵-C₅H₅)] (16). In contrast to5, its permcthylated analog 6 is only capable of adding hydrogen to the hexamethylbenzene ligand.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 7, pp. 1691–1697, July, 1996.     

A study of the polarographic behaviour of meso-tetra(4-trimethylammoniumphenyl)porphine and its copper and magnesium complexes and its analytical applications

The investigation of the electrochemical reduction and the adsorption of meso-tetra(4-trimethylammoniumphenyl)porphine (T(4-TMAP)P) at a mercury electrode in alkaline solution shows that the overall reduction involves three two-electron steps, of which the first step is reversible and the latter two are irreversible. In addition, T(4-TMAP)P and its metal complexes of Cu(II) and Mg(II) can be strongly adsorbed on the surface of a mercury electrode. The adsorption phenomena have been utilized as a preconcentration step for the determination of trace amounts of the two ions by single sweep polarography. For copper, the detection limit is 1 × 10^–8 mol dm^–3, for magnesium, 1 × 10^–7 mol dm^–3, the latter being limited by the reagent blank. The proposed method was applied to the determination of Cu and Mg in various types of samples (chemicals, hair and liver tissues) with satisfactory results.     

Direct calculation of ionization potentials of closed-shell atoms and molecules

Vertical ionization potentials, electron affinities and information about quasi-particles can be obtained by using the technique of the single-particle propagator. The expansion of the self-energy part up to third order perturbation theory can be evaluated numerically, but does not lead, in most cases, to satisfying results. A theoretical and numerical analysis of the diagrammatic expansion of the self-energy part requires the introduction of a renormalized interaction and renormalized hole and particle lines.