CdS thin films growth by fast evaporation with substrate rotation

CdS thin films were grown by fast evaporation technique combined with substrate rotation. The source evaporation temperature was maintained at 600 °C and the substrate temperature at 350 °C with background pressure of 1.0 m Torr. The substrates were corning glass 2947 with dimension of 1 in. × 1 in. rotate at 500 rpm during the growth. In order to verify the quality of the CdS films, the samples were analyzed by X-ray diffraction (XRD), scanning electron microscopy (SEM), atomic force microscopy (AFM) and optical measurements. The films shown a flat uniformity thickness with growth rate of ∼3.5 nm/s, the orientation was in the cubic-(1 1 1) and hexagonal-(0 0 2) plane in dependence of the growth time, grain size ∼5 nm, roughness uniformity ∼2.7 nm, transmittance in the visible region spectrum ∼80%, energy band gap between 2.39 and 2.42 eV and short circuit photocurrent density (J_SC) losses in the CdS films of 4.7 mA/cm².     

A facile strategy for the fabrication of uniform CdS nanowires with high yield and its controlled morphological growth with the assistance of PEG in hydrothermal route

A series of novel wurtzite cadmium sulphide (CdS) nanowires with uniform diameter were synthesized by using a rapid and simple solvothermal route. CdS nano structures with certain morphology could be selectively produced by only varying the concentration of poly ethylene glycol (PEG) as a surfactant in the reaction system with cadmium acetate, sulphur powder and ethelynediamine (EDA). We extensively studied UV-vis absorption spectra, photoluminescence spectra after confirming CdS nanowires with diameter 24-25 nm and length ranging up to several nano meters by field emission scanning electron microscopy (FE-SEM). Therefore we may definitely propose a new formation mechanism of CdS nanowires assisted by PEG with its illustrating optical properties.     

应用ICP-MS和GFAAS测定藻类食品中铅、镉的方法研究及比较

建立微波消解-电感耦合等离子体-质谱法(ICP-MS)测定藻类食品中铅、镉含量的方法,并与国家标准方法石墨炉原子吸收光谱法(GFAAS)进行了比较.样品经过微波消解,分别使用ICP-MS和GFAAS测定藻类食品裙带菜和海带中铅、镉含量,各元素校正曲线的相关系数均大于0.9991,样品分析结果RSD均小于3.6%(n=6...     

Intracavity laser absorption spectroscopy of platinum sulfide in the near infrared

A new electronic transition of PtS with a red degraded band head at 12 460 cm⁻¹ was recorded and analyzed. Gas phase PtS was produced in a platinum-lined hollow cathode with a trace of SF₆ gas, and the spectrum was recorded at near Doppler resolution using intracavity laser absorption spectroscopy. Molecular constants for the newly identified excited state are presented.     

CdS/PAMAM与氨基酸作用研究及其在潜在指印显现中的应用

提出了以硫化镉/聚酰胺-胺树形分子(CdS/PAMAM)纳米复合材料显现潜在指印的新方法。傅里叶变换光谱研究了PAMAM G4.5外部酯端基与氨基酸中胺基之间的胺解反应,选用相对峰高比H_{1 267/1 735}来监测不同条件下的反应进程,并发现温度对于胺解反应的影响很大,90 ℃时胺解反应可在4h内显著进行,120 ℃时胺解反应速率在3 h后发生递减。将CdS/PAMAM作为指印显现试剂,在同等条件下与现有常规指印显现液对比,发现前者的荧光强度约为后者的65倍,荧光性能优势明显。确定使用加热压显法显现不同客体表面潜在指印的条件为120 ℃下反应0.5～3 h。使用优化后的条件对多种载体表面潜在指印进行显现,可以获得理想的显现效果。该显现方法具有简便、快速、灵敏、安全、经济等特点。     

“反胶团法”合成的CdS半导体纳米粒子的光谱性质研究

反相胶束是指由介于油和水界面的表面活性剂分子, 稳定、且均匀分散于连续油介质中的微液滴。它可以作为“微反应器”合成性能优良的CdS粒子。文章研究了反相胶束的W值(W=[水]/[表面活性剂])、[Cd2+]与[S2-]的比例和Cd2+和S2- 离子的起始浓度对CdS纳米粒子发光特性均有明显影响。回流处理可以对CdS纳米粒子的表面进行修饰,可以使CdS粒子的缺陷发光减弱并消失而显著增强激子发射,同时可增大粒径使激子发射峰位红移,体现了明显的量子限域效应; 所得材料的室温最大荧光量子效率高达11%。     

Rate Constants for Reaction Between Hydroxyl Radical and Dimethyl Sulfide Under Real Atmospheric Condition

用相对速率方法分别考察了OH自由基与DMS在氮气、空气和氧气体系的反应速率常数. 发现使用HONO和CH3ONO作为OH自由基发生剂时,基态氧原子O(3P)对动力学的测定有很大的影响. H2O2为OH自由基的发生剂,室温下在氮气、空气及氧气体系下的速率常数分别为4.50×10-12,8.56×10-12和11.31×10-12 cm3/(molecule?s).在287～338 K,测得氮气和空气体系下的阿累尼乌斯表达式分别为:kair=(7.24±0.28)×10-13exp[(770.7±97.2)/T],kN2=(3.40±0.15)×10-11exp[-(590.3±165.9)/T     

Rotational spectra, nuclear quadrupole hyperfine tensors, and conformational structures of the mustard gas simulent 2-chloroethyl ethyl sulfide

Rotational spectra have been recorded for both the ³⁵Cl and ³⁷Cl isotopic forms of two structural conformations of 2-chloroethyl ethyl sulfide (CEES). The rotational constants of the ³⁵Cl and ³⁷Cl isotopomers were used to identify the conformational isomers. A total of 236 hyperfine transitions have been assigned for 47 rotational transitions of the ³⁵Cl isotope of a GGT conformer, and 146 hyperfine have been assigned for 37 rotational transitions of the ³⁷Cl isotopomer. For the second conformer, a total of 128 (110) hyperfine and 30 (28) rotational transitions have also been assigned to the ³⁵Cl (³⁷Cl) isotopes of a TGT conformation. The extensive hyperfine splitting data, measured to high resolution with a compact Fourier transform microwave spectrometer, were used to determine both the diagonal and off-diagonal elements of the ³⁵Cl and ³⁷Cl nuclear quadrupole coupling tensors in the inertial tensor principal axis system. The experimental rotational constant data, as well as the ³⁵Cl and ³⁷Cl nuclear quadrupole coupling tensors, were compared to the results from 27 optimized ab initio (HF/6-311++G^∗∗ and MP2/6-311++G^∗∗) model structures.     

CdS/ZnO纳米复合结构的制备、表征及其光催化活性的改善

利用简单的水热法在ZnO纳米棒表面合成CdS纳米粒子.用扫描电镜(SEM)和X射线衍射(XRD)对CdS/ZnO异质结构进行表征.实验结果表明,在生长CdS的过程中ZnO被逐渐地腐蚀.选择CdS/ZnO纳米复合材料作为光催化剂在紫外光和绿光照射的条件下降解甲基橙(MO).CdS/ZnO纳米复合材料纳米棒作为光催化剂降解...     

OCS经由F 31Π里德堡态生成CO(X1Σ+)+S(1D2)产物的波长相关性光解离

本文利用时间切片离子速度成像技术在134∽140 nm波段研究了OCS分子经由F 3¹Π里德堡态的真空紫外光解离动力学. 在选取的5个分别对应OCS(F 3¹Π, v₁=0∽4)的伸缩振动激发的光解波长,实验测得了来自CO(X¹Σ⁺)+S(¹D₂)产物通道的SS(¹D₂))实验影像,并获得了总平动能谱和CO(X¹Σ⁺, v)共生产物的振动布居及角分布. 结果分析表明OCS分子解离生成CO(X¹Σ⁺)+S(¹D₂)产物的过程经历了上态F 3¹Π 与C_?v和C_s构型的下电子态间非绝热耦合过程. 实验结果显示了很强的波长相关性：OCS (F 3¹Π, v₁)的较低转动激发态(v₁=0∽2)和较高转动激发态(v₁=3, 4)的CO(X¹Σ⁺)产物的振动布居和角分布具有显著差异,表明该解离过程中具有不同的解离机理. 本结果提供了振动耦合可能对真空紫外光解离动力学产生关键作用的相关证据.