大面积玻璃RPC模型与性能测试

介绍了可用于粒子探测的大面积玻璃高阻板探测器RPC(Resistive Plate Chamber).使用两块间隔2mm的普通浮法玻璃作为电极,其中充入流动的混合气体(氩气+异丁烷+F134A),工作高压约9600V;性能测试结果,其单室效率可达97%,时间分辨可达到1.8ns.     

因特网防御DoS攻击技术评述Ⅰ--攻击分类与特征·包过滤·攻击检测与防御

概述了因特网上DoS攻击的相应分类及基本特征，评述了包过滤、攻击检测及防御技术的最新成果．前一部分介绍了入口过滤、基于路由的过滤网和有效源地址强制协议．后一方面主要讨论了适合于检测攻击包的技术，介绍了新近提出的频谱分析方法和泛滥检测系统．简要评述了已有的防御SYN泛滥攻击的技术措施，介绍了Cisco的TCP拦截技术，提出了改进策略．     

基于分层光学扫描的三维数字化测量技术

采用切削分层光扫描测量与计算机数据信息合成相结合的方法，有效地解决了具有复杂内外腔结构零件的三维数字化测量。该方法比传统三维测量速度快、自动化程度高，能同时准确测量零件内外腔表面，零件边缘测量误差可控制在CCD两个像素内。利用获取的铝合金精密小箱体三维数据，在计算机上重构了零件的三维模型，并用RP技术制造出了零件物理原形。     

激光水下偏振特性用于目标图像探测

利用激光水下偏振特性获得偏振差分图像(PDI),并运用PDI技术,从理论和实验上对水下目标探测进行了研究.介绍了PDI基本概念和实验系统原理,然后比较分析了不同条件下普通图像与PDI在辨别目标距离及其纹理上的差别和PDI中背景偏振光的影响,得出利用目标和背景偏振光的差异区分二者,从而提高探测距离的结论,并取得了较好的效果.在此基础上提出了通过处理有关PDI偏振参量来进一步辨别目标与背景的设想.     

On the Solution of Discontinuous IVPs by Adaptive Runge–Kutta Codes

In this paper an automatic technique for handling discontinuous IVPs when they are solved by means of adaptive Runge–Kutta codes is proposed. This technique detects, accurately locates and passes the discontinuities in the solution of IVPs by using the information generated by the code along the numerical integration together with a continuous interpolant of the discrete solution. A remarkable feature is that it does not require additional information on the location of the discontinuities. Some numerical experiments are presented to illustrate the reliability and efficiency of the proposed algorithms.     

早期火灾图像监测技术的应用与比较

本文对可提供图像信息的火灾物理现象进行了具体分析，讨论了利用摄像技术进行早期火灾探测的可能性、使用条件以及图像监测技术在火灾探测中的地位和作用，进行了若干种图像监测技术的对比实验，得出了相应的结论。     

A coincidence transmission electron microscope with digital waveform measuring system for analytical microscopy

We have been developing a new analytical transmission electron microscope (TEM), called a coincidence TEM, which in principle enables elemental mapping images to be observed at a high signal‐to‐noise (S/N) ratio under very low dose radiation conditions. In this paper, we report the development of a coincidence TEM with a digital waveform measuring system for obtaining a coincidence elemental mapping image. In this system, analog signals detected by a Si(Li) detector and a multianode, position‐sensitive photomultiplier (PSPM) are continuously converted into 12‐bit digital waveform data at a rate of 100 MHz, and transferred to a PC. From the transferred digital waveform data, information on X‐ray photon energy, electron incident position, and detection times of both X rays and electrons are calculated by digital waveform measurement, which lead to the observation of a successful coincidence elemental mapping image. Copyright © 2005 John Wiley & Sons, Ltd.     

透射式跑道能见度激光测量仪的研究

介绍了一种利用激光测量跑道水平及斜视能见度的智能化仪器。该仪器主要由光学系统、信号放大与处理系统及显示系统三部分组成。简要介绍了该仪器的基本结构、工作原理和主要技术指标，讨论了其中的技术难点及其相应的解决办法。     

Novel All Digital Scheme for Open Loop Fiber Optic Gyroscopes

ＮｏｖｅｌＡｌＤｉｇｉｔａｌＳｃｈｅｍｅｆｏｒＯｐｅｎＬｏｏｐＦｉｂｅｒＯｐｔｉｃＧｙｒｏｓｃｏｐｅｓＹＡＮＧＹｕａｎｈｏｎｇ（Ｔｈｅ５ｔｈＲｅｓｅａｒｃｈＤｉｖｉｓｉｏｎｏｆＢｅｉｊｉｎｇＵｎｉｖｅｒｓｉｔｙｏｆＡｅｒｏｎａｕｔｓ＆Ａｓｔｒｏｎａｕ...