Hydrothermal synthesis of FeS2 for lithium batteries

Nanocrystalline FeS₂ cathode material of lithium cell was synthesized from cheap materials of FeSO₄, Na₂S₂O₃, and sulfur by a hydrothermal process. The scanning electron microscopy analysis showed the obtained material was nano-sized, about 500 nm. The X-ray powder diffraction analysis showed that the synthetic FeS₂ material had two phases of the crystalline structure, pyrite and marcasite. The phase of marcasite seems to have no negative effect on the electrochemical performance of the material. The synthetic FeS₂ showed a significant improvement of electrochemical performance for Li/FeS₂ cells.     

基于LiCo0.8M0.2O2 (M=Ni,Zr)薄膜的全固态薄膜锂电池

用射频磁控溅射结合传统退火的方法制备LiCo0.8M0.2O2 (M=Ni,Zr)阴极薄膜．X射线衍射、拉曼光谱、扫描电子显微镜等手段表征了不同掺杂的LiCo0.8M0.2O2薄膜．结果显示,700℃退火的LiCo0.8M0．2O2薄膜具有类似α-NaFeO2的层状结构．通过对不同掺杂锂钴氧阴极的全固态薄膜锂电池Li／LiPON／LiCo0.8M0.2O2的电化学性能研究表明,电化学活性元素Ni的掺杂使全固态电池具有更大的放电容量(56μAh／cm2μm),而非电化学活性元素Zr的掺杂使全固态电池具有更好的循环稳定性．     

Preparation and Mechanical Properties of Fe3Al Nanostructured Intermetallics

Nanostructured Fe₃Al intermetallic compounds were produced by using hydrogen arc plasma method. The transmission electron microscopy experiments showed that the average particle size of the as-synthesized was about 40-nm. The change in hardness of Fe₃Al nanostructured intermetallic compounds with annealing temperatures was observed and evaluated.     

光束偏转法自动测试激光等离子体冲击波系统的研制

根据光束偏转原理，研制了激光等离子体冲击波自动测试系统的硬件和软件。该系统使用计算机与可编程序控制器作为上下位机，采取上下位机通讯的方式控制步进电机及二维移动架的移动，以改变探测光的相对位置，并利用单模光纤和光电倍增管将探测到的光偏转信号传入数字示波器进行存储，最后计算机将示波器中采集到的光偏转信号进行分析处理。使用该系统对激光等离子冲击波的衰减过程进行了实际测试，得到了较为理想的实验结果。     

Nusselt number correlations for heat transfer to small spheres in thermal plasma flows

Seven different equations predicting heat transfer rates to small spheres in plasma flows are examined considering argon and nitrogan as plasma gases from 300 to 21,000 K at 1 atm. For argon there is a general consensus up to 9000 K, beyond which wide deviations in behavior occur. For nitrogen, the seven correlations are in good agreement up to 4000 K, but show substantial deviations beyond this value. Comparisons with the sparsely available experimental data are made for argon from 300 to 17,000 K and for nitrogen up to 5500 K. Disagreement between the various correlations and experiment can exceed one order of magnitude.     

�Թ�ŵ��������߻�����ż����C2��

在常温常压下采用新型旋转电极等离子体反应器，对辉光等离子体作用下的甲烷偶联反应制C2烃进行了研究。结果表明，甲烷偶联反应的主要产物为C2H2，占C2烃的80%以上，能量效率在5.6%～11.2%之间；增加H2含量可以提高CH4转化率和C2烃收率；在500～2200kJ•mol−1的能量密度范围内，CH4转化率随能量密度的增大而线性增加，C2烃收率随着能量密度的增加呈峰形变化趋势。     

气体放电等离子体特性测量I-V曲线不对称性的研究

利用气体放电双探针法研究了等离子体的I-V曲线中的电流I相对于电压V轴交点的不对称性,并提出2种可能的解释:一认为是由于两探针表面积不同引起的;二认为是由于探针所在处等离子体电位不等引起的.本文利用仪器的工艺误差和调换放电管电压的方法,对提出的2种可能原因分别进行验证,并指出第二种解释的合理性,并对其进行了理论分析.     

Nonlinear oblique propagation of magnetohydrodynamic waves in the solar wind

Summary Oblique propagating magnetohydrodynamic waves with various wave forms and amplitudes are observed both at the Earth's foreshock and at comets. The possibility of interpreting some observational results in terms of nonlinear evolution of one- and two-dimensional hydromagnetic waves is investigated. For this purpose both analytical and numerical techniques are employed. It is found that an initial monochromatic wave changes its polarization giving origin to magnetosonic shocks and rotational discontinuities; the time evolution of density-magnetic-field correlation is studied, as a function of the plasma parameters and of the propagation angle. In the two-dimensional case both a transverse instability and a self-focusing effect may take place. Moreover, a two-dimensional magnetosonic solution is found, in which the density fluctuations are driven by the total pressure fluctuation as in a one-dimensional simple wave. These theoretical predictions compare well with the features observed in the solar-wind waves. Paper presented at the V Cosmic Physics National Conference, S. Miniato, November 27–30, 1990.     

医疗和危险废物高温洁净热处理及环境力学

结合2003年中国的突发危害公众健康的事件，分析了医疗、化学战剂及危险废物的分类、特性，比较了各种高温热处理技术的基本要求，方法分类和设备特点，包括：各类焚烧炉、热解炉和等离子体裂解装置．还对前处理工艺要求，尾气处理工艺等进行了分析讨论，讨论了防止二次污染的技术手段，特别介绍了二噁英等高危险性产物的特性．还介绍了发达国家的医疗废物和危险废物的管理、处置和二次污染防治等情况．