铁(III)卟啉催化β-胡萝卜素分解动力学研究

使用BeckmannDU-8B紫外可见分光光度计研究了以氯合四－间三甲苯基卟啉铁（Ⅲ）（FeTMPCl）为催化剂，间氯过氧化苯甲酸（mCPBA）为氧化剂，咪唑（I_m）、2－甲基咪唑（MeI_m）、2－乙基－4－甲基咪唑（EMI_m）为轴向配体，催化β-胡萝卜素（β－cte）氧化分解为维生素A的动力学规律，提出了反应机理，研究了温度、催化剂浓度、氧化剂浓度及轴向配体对反应速率的影响，应用Gauss－Newton－Marquardt方法求得各基元反应的有关动力学参数．     

Zwitterionic titanoxanes {Cp[η-C5H4B(C6F5)3]Ti}2O and {(η-PrC5H4)[η-1,3-PrC5H3B(C6F5)3]Ti}2O as catalysts for cationic ring-opening polymerization

Zwitterionic titanoxanes {Cp[η⁵-C₅H₄B(C₆F₅)₃]Ti}₂O (I) and {(η⁵-ⁱPrC₅H₄)[η⁵-1,3-ⁱPrC₅H₃B(C₆F₅)₃]Ti}₂O (II), which contain two positively charged Ti(IV) centres in the molecule, are able to catalyse the ring-opening polymerization of -caprolactone (-CL) in toluene solution and in bulk. The process proceeds with a noticeable rate even at room temperature and accelerates strongly on raising the temperature to 60 °C. The best results have been obtained on carrying out the reaction in bulk. Under these conditions, the use of I as a catalyst (-CL:I = 1000:1) gives at 60 °C close to quantitative yield of poly--CL with the molecular mass of 197 000. An increase in the -CL:I ratio to 6000:1 increases the molecular mass of poly--CL to 530 000. Tetrahydrofuran (THF) is also polymerized under the action of I albeit with a lesser rate. However, the molecular mass of the resulting poly-THF can reach rather big values under optimal conditions (up to 217 000 at 20 °C and the THF:I ratio of 770:1). A rise in the reaction temperature from 20 to 60 °C results here to a decrease in the efficiency of the process. Titanoxane II is close to I in its catalytic activity in the -CL polymerization but it is much less active in the polymerization of THF. Propylene oxide (PO), in contrast to -CL and THF, gives with I only liquid oligomers in wide temperature and PO:I molar ratio ranges (−30 to +20 °C, PO:I = 500–2000:1). γ-Butyrolactone and 1-methyl-2-pyrrolidone are not polymerized under the action of I at room temperature. The reactions found are the first examples of catalysis of the cationic ring-opening polymerization by zwitterionic metallocenes of the group IVB metals.     

Sequential injection spectrophotometric determination of trace amounts of iodide by its catalytic effect on the 4,4'-methylenebis(N,N-dimethylaniline)-chloramine-T reaction

A simple and sensitive sequential injection spectrophotometric procedure is proposed for the determination of trace amounts of iodide in pharmaceutical preparations. The method is based on the catalytic effect of iodide on the (tetra base) 4,4′-methylenebis(N,N-dimethylaniline)-chloramine-T reaction in acidic solution. The method involves a sequential aspiration of 255 μl sample/standard followed by 170 μl tetra base and then 128 μl chloramine-T solutions into a carrier stream to be stacked inside a holding coil and flow reversed through a reaction coil towards a detector. The resulting colored compound is measured at 600 nm using an UV/Vis-spectrophotometer. All the parameters that affect the reaction were evaluated and the calibration curve is linear over a range of 0.1–6.0 μg l⁻¹ of iodide concentration with detection limit of 0.05 μg l⁻¹. A sample throughput of 80 samples per hour and relative standard deviation of less than 2.0% was achieved. The method is successfully applied for the determination of iodide in three different samples (tablets).     

Application of the semilocalized approach to chemical reactivity of butadiene

The semilocalized approach to chemical reactivity (J. Mol. Struct. (Theochem) 588 (2002) 99; Int. J. Quant. Chem. 94 (2003) 302) is applied to study the addition reaction of an electrophile or nucleophile to the butadiene molecule. In accordance with the classical concept of the reaction center and its neighborhood (substituent), only one of the two H₂C=CH-fragments of butadiene is supposed to be under a direct attack of the reagent, whereas the remaining H₂C=CH-group is assumed to play the role of the substituent and thereby to participate in the process indirectly by exerting certain electron-donating or accepting effect upon the former group and/or the reagent. The main aim of the study consists in revealing the role of the H₂C=CH-substituent in the formation of the known higher reactivity of the terminal carbon atom of the attacked C=C-bond (as compared to the internal atom) irrespective of the nature of the reagent. To this end, we seek to obtain an explicit algebraic representation of the interdependence between the direction and the extent of the total influence of the H₂C=CH-substituent, on the one hand, and the nature of the reagent, on the other hand. The expressions for electron density and bond order redistributions among separate fragments of contacting molecules derived previously in the form of power series are shown to yield the above-anticipated representation. On this basis, it is demonstrated that the electron-donating effect of the initially occupied (bonding) orbital of the substituent and the electron-accepting effect of its initially vacant (antibonding) orbital upon the remaining fragments of the whole reacting system may be considered independently whatever the nature of the reagent. However, a strong interdependence is established between the actual relative extents of these two components of the total effect of the H₂C=CH-group and the electron-donating (accepting) properties of the reagent. Moreover, this group of atoms is shown to manifest itself as an electron-donating (accepting) substituent under influence of an electrophilic (nucleophilic) attack. Using this principal result of the paper, the actual reactivity of butadiene with respect to electrophile (nucleophile) is interpreted by invoking a model system of a substituted ethene containing a simple (one-orbital) electron-donating (accepting) substituent, and a terminal addition easily follows for both types of the reagent.     

One-Pot Convenient and High Yielding Synthesis of Dithiocarbamates

Summary. A convenient and high yielding method for the synthesis of diverse dithiocarbamates having various substituents including alkyl, aryl, heteroaryl, and alkylaryl at the thiol chain or at the amine chain or at both thiol and amine chains were developed by the one-pot reaction of mercaptans, amines, and bis(benzotriazolyl)methanethione in presence of amidine base under mild reaction conditions.     

反应条件对Mo2C/Al2O3催化的POM制合成气的影响

考察了反应温度、气体空速和进料中CH4：O2比值对Mo2C／Al2O3催化的POM反应制合成气的影响．结果发现较高的温度具有较高的甲烷转化率、CO和H2的选择性；而在较低的温度下，对CO的选择性比对H2的影响更大．反应气体的空速较小时对于甲烷的转化率、CO和H2的选择性是有利的；而在较高的气体空速下，氢气的选择性则更低．进料中CH4：O2比值稍高于2：1时有利于获得高的甲烷转化率、CO和H2的选择性．并且还可以增加催化剂的稳定性．当CH4：O2比值低于2：1时．甲烷转化率、CO和H2选择性随反应的进行急剧下降．而当此比值调整到高于2：1时．转化率和选择件都可以得到恢复。     

Polyaniline-coated silica gel

Silica gel microspheres 7 and 15 μm in diameter were coated with an overlayer of polyaniline camphorsulfonate or hydrochloride during the oxidative polymerization of aniline. Coated silica gel and polyaniline precipitate were separated using a difference in sedimentation rate. In an alternative approach, the microspheres were modified with polyaniline in the presence of 35 nm colloidal silica. This technique prevented the macroscopic precipitation of polyaniline. Coatings of neat, 3-aminopropyl- and octadecyl-modified silica gel with polyaniline hydrochloride were compared. The surface composition of coated microspheres was characterized by X-ray photoelectron spectroscopy. Potential applications of particles in electrorheology, organic catalysis, and in modeling of conductivity behavior in composites are demonstrated.     

Polymer-protected palladium nanoparticles. Morphologies and catalytic selectivities

Colloidal palladium nanocatalysts prepared by in situ reductions of palladium chloride were immobilized and protected by either of two water-soluble polymers. The particle sizes and size distributions of the palladium colloids were determined by transmission electron microscopy. Their selectivities as catalysts were determined by comparing the extents of hydrogenation of carefully chosen pairs of small-molecule olefins. There was found to be high hydrogenation selectivity with regard to cyclic vs. noncyclic olefins. Selectivity was relatively low, however, among olefins that differed only in size (such as hexene vs. octene), or olefins differing only with regard to the positions of the double bonds (such as 1-octene vs. 3-octene). Selectivity could be improved by careful choice of the immobilizing polymer, and by its use at relatively high concentrations.     

Palladium-catalyzed reactions for the synthesis of chlorins and 5,10-porphodimethenes

The palladium-catalyzed reaction of RLi with various 5,10,15,20-tetrasubstituted porphyrins offers a convenient synthetic route to chlorins and porphodimethenes (calixphyrins). The reactions utilized various Pd catalysts and CuI and yielded either 2,3-substituted chlorins or 5,10-disubstituted porphodimethenes in yields ranging from 20-40%. The reaction of octaethylporphyrin with t-BuLi in the presence of a Pd-catalyst generated the corresponding 5,10-porphodimethene in 72% yield.     

A density functional theory study of the gas-phase elimination reactions of 4-arylideneimino-1,2,4-triazol-3(2H )-ones and their 3(2H )-thione analogues

Theoretical studies on the thermolysis in the gas phase of 4-arylideneimino-1,2,4-triazol-3(2H)-ones and 4-arylideneimino-1,2,4-triazol-3(2H)-thiones were carried out using density functional theory methods, at the B3LYP/6-31G(d) and B3LYP/6-311+G(2d,p) levels of theory. The proposed reaction mechanism occurs in one step, leading to the formation of 3-hydroxy-(2H)-1,2,4-triazole or 3-mercapto-(2H)-1,2,4-triazole and a 4-substituted benzonitrile, via a six-membered cyclic transition state. The progress of the reactions was followed by means of the Wiberg bond indices. The results indicate that the transition states have character intermediate between reactants and products, and the calculated synchronicities show that the reactions are slightly asynchronous, in the case of triazolones, and show a higher asynchronicity in the case of triazolthiones. The bond-breaking processes are slightly more advanced than the bond-forming ones, indicating a small bond deficiency in the transition states. Kinetic and activation parameters for the reactions studied have been calculated and compared with available experimental data.From the Proceedings of the 28th Congreso deQuímicos Teóricos de Expresión Latina (QUITEL 2002)