氢化石墨烯作为不含金属的催化剂用于催化类Fenton反应

采用室温辐照还原与氢化的方法制备氢化石墨烯. 透射电子显微镜、元素分析、X射线光电子能谱和紫外可见光谱等测试证实了获得的产物为氢化石墨烯. 以该氢化石墨烯为不含金属的催化剂进行了类Fenton反应,发现其有高的催化活性,可以用于水中有机物的氧化降解.     

Characterization and chemical behavior of submonolayer coverages of titania on a Pt foil

The interaction between submonolayer titania coverages and Pt foil has been studied by Auger electron spectroscopy (AES), X-ray photoelectron spectroscopy (XPS), temperature programmed desorption (TPD) and high-resolution electron energy loss spectroscopy (HREELS). The submonolayer titania can be fully oxidized to TiO₂ at 923 K under 10⁻⁸ Torr O₂, and partially oxidized to TiO_x at lower oxidation temperatures. The oxidized surface can be reduced by annealing to 1000 K or higher, or by heating in H₂ at 823 K, or by interacting with surface carbon formed from acetone decomposition. Under certain conditions (e.g., hydrogen reduction at 923 K), the surface titania can be fully reduced to metallic Ti which diffuses into bulk Pt readily. The reduced metallic Ti can resurface when the surface is oxidized at 923 K. Both XPS and HREELS data indicate the existence of subsurface oxygen, which plays an important role for the diffusion of Ti into and out of the Pt foil. Although no special interfacial active sites were revealed by HREELS studies of adsorbed acetone and CO, some TPD and XPS data suggest the presence of sites active for acetone decomposition.     

Palladium island growth on Ni(111) Stochastic classical trajectory — ghost atom calculations

We generalize previous stochastic classical trajectory-ghost atom calculations for describing palladium deposition onto the Ni(111) surface between 0.1 and 0.5 monolayers. The growth evolves through two-dimensional islands. The islands are formed following the downward funneling mechanism. Surface temperature does not affect the island growth.     

分子信标的原理、应用及其研究进展

分子信标是一种设计巧妙的新型荧光标记核酸探针。特殊的发夹结构使分子信标具有很强的特异性识别靶标序列的能力 ,目前已成为分子生物学和生物技术中一种强有力的研究工具。本文介绍了分子信标的原理及其在 PCR、核酸序列的分析、活细胞内核酸的动态检测、蛋白质 (酶 )与核酸的相互作用等方面的应用和研究进展。     

红外光谱法原位监测亚微米树脂吸附反应

亚微米树脂吸附反应是一种快速反应,离线取样分析较困难。本文采用红外光谱技术原位监测亚微米树脂吸附庆大霉素反应,找到并验证了脂上吸附庆大霉素的吸收峰位置,并用偏最小二乘法建立定量模,模型的相关系数为０．９７９。在此基础上对不同初始浓度的吸附反应实现了原位监测。     

大数据时代下的化学经验2.0：基于键能的大规模反应途径预测

报道了一个基于键能数据预测反应途径的可编程算法．运用该算法,成功预测了F₂+CH₃Cl气相反应的最优产物(CF₄)和对应的反应途径．提供了一个启示性的化学经验2.0 的例子,并可能开启大数据时代下的大规模反应途径预测的大门．     

O(1D)和CD4反应的准经典轨线

在新的全域势能面上, 用准经典轨线方法细致地研究了O(¹D)+CD₄多通道化学反应的动力学．这个势能面是用交换不变多项式方法基于MRC+Q/aug-cc-pVTZ从头算点拟合得到的．通过计算得到了产物OD+CD₃、D+CD₂OD/CD₃O和D₂+DCOD/D₂CO的分支比、平动能分布以及角度分布,结果显示理论与实验吻合得较好, 从而说明了这个反应的同位素取代效应很小． 研究表明,O(¹D)+CD₄反应是经过陷入的抽取机理发生的： 最初主要通过D原子的抽取,并不是之前人们认为的直接C-D键的插入形成CD3OD中间物后再进而解离成各个产物通道．     

Photoelectron diffraction study of a catalytically active overlayer: C2H2 on Pd{111}

A quantitative structure determination of a newly discovered (2×2) adsorption phase of acetylene chemisorbed on Pd{111} has been performed by scanned-energy mode photoelectron diffraction: this phase corresponds to the threshold coverage for the catalytic conversion of acetylene to benzene. The carbon atoms in the C₂H₂ molecule are located almost over bridge sites with a C–C bond length of 1.34+0.10 Å, the centre of the molecule being positioned almost over a hollow site. Of the two hollow sites the hcp site (directly above a second layer Pd atom) is favoured, particularly by a subset of the data most sensitive to this aspect of the structure, but the full analysis indicates that the fcc site (above a third layer Pd atom) cannot formally be excluded. The adsorption site adopted by acetylene in the higher coverage phase on Pd{111} is essentially identical. This is the dominant structure in the coverage regime which is catalytically active for the conversion of acetylene to benzene. The implications of these findings for acetylene coupling reactions over Pd{111} are discussed.     

PuO2体系的分子反应动力学研究

基于ＰｕＯ２分子（Ｘ＾５Σｇ＾＋）的多体展式分析势能函数,用准经典的Ｍｏｎｔｅ－Ｃａｒｌｏ轨迹法研究了Ｏ（＾３Ｐｇ）＋ＰｕＯ（０,０）和Ｐｕ（＾７Ｆｇ）＋Ｏ２（０,０）的分子反应动力学过程。结果表明：Ｏ（＾３Ｐｇ）＋ＰｕＯ（０,０）碰撞生成少量稳定络合物ＰｕＯ２（Ｘ＾５Σｇ＾＋）,该反应是无阈能反应;而Ｐｕ（＾７Ｆｇ）＋Ｏ２（０,０）碰撞生成稳定络合物的同时,主要还发生了Ｐｕ（＾７Ｆｇ）＋Ｏ２（０     

Theoretical Studies of O(1D)+HD (v=0, j=0, 1, 2, 3)→OD(H)+H(D) Reaction

利用准经典轨线计算方法在DK势能面上对O+HD进行了计算,获得了产物的反应截面和分支比OD/OH. 计算结果表明,当碰撞能由4.6 kJ/mol增加到46.0 kJ/mol时,产物的反应截面随着碰撞能的增加明显减小;产物的平均分支比随着转动量子数的增加逐渐减小.