End-functionalized polyethylene oxide coated silica particles for packed capillary column supercritical fluid chromatography

Summary Polyethylene oxide (PEO)-based polymers with hydroxy, methoxy, and aminopropoxy terminal groups were coated on diol functionalized and hexamethyldisilazane end-capped silica particles. Proton-donor and proton-acceptor test solutes, including carboxylic acids, hydroxy-containing compounds, arylamines, and alkylamines were used to evaluate the chromatographic performances of these polymer coated particles under SFC conditions with neat CO₂ as mobile phase. It was found that the particles coated with hydroxy-terminated PEO were suitable for the separation of proton-donor compounds such as hydroxy-containing compounds and carboxylic acids, and the particles coated with aminopropoxy-terminated PEO could be used for the separation of amines. That is, the proton-accepting stationary phase is suitable for the separation of proton accepting solutes, including strong basic alkylamines (pK_b4), using neat CO₂ as mobile phase, while the protondonating stationary phase is suitable for the separation of proton-donating compounds such as carboxylic acids (pK_a4). Hydrogen bond basicity was found to be a critical factor for the chromatography of basic amines. Low volatility acidic and basic drugs were chromatographed using the new stationary phases. The stability of the PEO coated particles was determined by measuring the loss of organic carbon under SFC conditions. It was found that approximately 18 % of the coating (average molecular weight of 15,000) was washed out of the particles by supercritical CO₂ after 7 h at 350 atm and 50°C     

Production of multi-hollow polymer particles by the stepwise acid/alkali method

 Recently, we reported that multi-hollow polymer particles can be prepared from carboxylated polymer particles by the stepwise alkali/acid method. In this article, an attempt was made to prepare similar particles from acid-swellable polymer particles by the stepwise treatment with acid and alkali, which was named the stepwise acid/alkali method. The acid-swellable particles were produced by emulsion terpolymerization of styrene, butyl acrylate, and dimethyl 2-amino ethyl methacrylate. The effects of initial pH value, temperature, and time in the acid and alkali treatment processes on the multi-hollow structure were examined. Received: 18 December 1996 Accepted: 11 March 1997     

New In-situ Sampling and Analysis of the Production of CeO<Subscript>2</Subscript> Powders from Liquid Precursors using a Novel Wet Collection System in a rf Inductively Coupled Thermal Plasma Reactor. Part 1: Reactor System and Sampling Probe

A new reactor and a novel in-situ sampling technique were developed for the study of the synthesis of CeO₂ powders produced from dissolved cerium nitrate salts. The conical reactor minimized particle recirculation and provided a highly symmetrical and undisturbed plasma flow suitable for the analysis of the phenomena affecting the formation of CeO₂ powders. Both a calorimetric study of the reactor and a thermodynamic analysis of CeO₂ formation were conducted. The sampling probe is described and near-isokinetic sampling was achieved. The sampled particles were collected using a miniature wet collection system, i.e. a mist atomizer and a custom-made spray chamber. A numerical simulation of the velocity and temperature fields of the plasma gas in the reactor was done using Fluent. A comprehensive droplet-to-particle formation mechanism presented elsewhere is revisited and expanded based on calorimetry, thermodynamics of CeO₂ formation, numerical simulations and collected particles. No traces of other oxidation states other than CeO₂ were found.     

Influence of the heating conditions on the thermal and chemical behaviour of solid particles undergoing a fast endothermic decomposition

This paper deals with models describing the thermal and chemical behaviour of solid particles undergoing fast endothermic reactions under the influence of an external heat flux. The heat source temperature is supposed to be constant, to increase with time, or to deliver a simple thermal flash. It is shown that the pyrolysis conditions (reaction temperature, conversion, etc.) depend on the chemical characteristics of the reaction and also to a large extent on the external heating conditions. Relationships are proposed to take into account these parameters. The results are applied to the thermal decomposition of NaHCO₃. The pyrolysis of cellulose is finally chosen in order to show how these operating parameters can also affect the selectivity of a more complex reaction.     

三氧化铬超微粒的制备与表征

我们曾首次报道了Fe_2O_3超微粒溶胶具有大的三阶光学非线性响应,其X~((3))值与商品用的掺杂CdS_(1-x)Se玻璃相近,并对其产生机制进行了初步研究.本文用微乳液法制备了经十二烷基苯磺酸钠(DBS)和硬脂酸(ST)表面修饰的Cr_2O_3超微粒,并用TEM、IR、XPS及紫外可见吸收光谱进行了表征.     

Nonionic latices in aqueous media part 1. Preparation and characterization of polystyrene latices

A series of non-ionic polystyrene latices in aqueous media containing particles with a narrow size distribution have been prepared using a nonyl phenol poly(ehylene glycol) condensate as the surfactant, methoxy poly(ethylene glycol methacrylate) as the comonomer/stabilizer, and ascorbic acid/hydrogen peroxide as the initiator system. As a control synthesis for comparison with the above latex, a charge stabilized polystyrene latex was prepared, using an anionic surfactant and potassium persulphate as the initiator. Latices employing a combination of charge plus steric stabilization mechanisms were also prepared, in order to investigate the effect of the non-ionic surfactant and the comonomer/stabilizer. The particle size of the latices was measured by transmission electron microscopy, the surface charge density by conductimetric titration and the glass transition temperature of the polymer by differential scanning calorimetry. The latex prepared using non-ionic ingredients, showed no titratable charge and exhibited a profound lowering of the glass transition temperature, with respect to the charge stabilized latex. On the basis of these results, schematic models for the polymerization mechanism and the morphology of the latex particles are proposed.     

The role of complexing ligands in the formation of non-aggregated nanoparticles of zirconia

The hydrolysis and condensation of zirconium n-propoxide in n-propanol have been chemically controlled via the complexation of the zirconium precursor with acetylacetone. The size of the zirconium oxide-based particles is mainly controlled by the complexation ratio x=[acac]/[Zr]. the mean size increases from nanometric to submicronic range when x decreases from 1 to 0.1. Amorphous colloidal particles are obtained at room temperature. They result from a competitive growth/termination mechanism of zirconium-oxo species in the presence of acac surface capping agents. However non-aggregated nanocrystalline particles of tetragonal zirconia, about 2 nm in diameter are formed upon aging at 60°C when hydrolysis is performed in the presence of paratoluene sulfonic acid (PTSA).     

含羧基/环氧树脂的丙烯酸酯共聚物乳液的制备和交联——1.含羧基丙烯酸酯共聚物乳液的分子设计和制备

以在低温下(<100℃)实现含羧基/环氧树脂的丙烯酸酯共聚物乳液的交联固化为目的,进行了分子设计;估算了共聚物的组成,用碱滴定法测定了乳胶粒表面的羧基数,并比较了不同单体配比所得乳液的成膜性能.     

Production of submicron-sized multihollow polymer particles by alkali/cooling method

Submicron-sized styrene-methacrylic acid copolymer particles, which were produced by emulsion copolymerization, were changed to those having multihollow structure by treating stepwise the emulsion as follows. First alkali treatment was carried out at higher temperature than the glass transition temperature and subsequently the emulsion was cooled by keeping it at room temperature. This was named alkali/cooling method. The effects of methacrylic acid content, pH, time and temperature in the alkali treatment on the formation of multihollow structure were clarified.Part CLV of the series Studies on suspension and emulsion     

Synthesis and characterization of monodisperse magnetic composite particles for magnetorheological fluid materials

Monodisperse magnetic composite particles (MCP) were prepared and characterized for a study of magnetic field-responsive fluids. Magnetic composite particles used are iron oxide-coated polymer composite particles, which were synthesized through in situ coating of iron oxide onto pre-existing polymer particles by the reduction of ferrous fluids. For a uniform and bulk coating of iron oxide, the porous structure was introduced into the substrate polymer particles through a two-step seeded polymerization method. Moreover, surface cyano-functionality was born from acrylonitrile unit of substrate polymer and it played an important role in obtaining successful uniform coating. The structure of the composite particle was analyzed by using a thermo gravimetric analysis (TGA) and a X-ray diffraction (XRD) analysis. The magnetization property of the particle was also observed. Then, the rheological properties of monodisperse magnetorheological (MR) suspensions of magnetic composite particles were examined under a magnetic field using a parallel-plate type commercial rheometer. From the rheological measurements, it was found that MR properties of the magnetic composite suspensions are dependent on the iron oxide content and the fluid composition.