选择性氧化含氰基的对硝基苯硫醚

选择性氧化含氰基的对硝基苯硫醚岳国仁，王建华，张正（南京大学化学系南京２１０００８）关键词含氰基硫醚，选择性氧化，四水合过硼酸钠据报道［１］对硝基苯磺酰基乙腈的合成，反应时间长，可采用四水合过硼酸钠（ＮａＢＯ３·４Ｈ２Ｏ）作为氧化剂，受到重视［２，３...     

Influence of the texture of chromia catalysts on their activity in synthesis of 2-methylthiophene

The texture of Cr₂O₃-K₂O/Al₂O₃catalysts containing oxides of rare earth elements (REE) was studied. The catalysts are used for the synthesis of 2-methylthiophene by the reaction of H₂S with n-pentane or piperilene. The heterocyclization of n-pentane is a consecutive reaction involving a step of dehydrogenation of initial hydrocarbon. At this step the texture of the catalyst affects the yield of 2-methylthiophene. The yield of 2-methylthiophene obtained from piperilene and I₂S is independent of the catalyst texture.     

Synthesis of New Lithium Ionic Conductor Thio-LISICON—Lithium Silicon Sulfides System

The new lithium ionic conductors, thio-LISICON (LIthium SuperIonic CONductor), were found in the ternary Li₂S-SiS₂-Al₂S₃ and Li₂S-SiS₂-P₂S₅ systems. Their structures of new materials, Li_4+xSi_1−xAl_xS₄ and Li_4−xSi_1−xP_xS₄ were determined by X-ray Rietveld analysis, and the electric and electrochemical properties were studied by electronic conductivity, ac conductivity and cyclic voltammogram measurements. The structure of the host material, Li₄SiS₄ is related to the γ-Li₃PO₄-type structure, and when the Li⁺ interstitials or Li⁺ vacancies were created by the partial substitutions of Al³⁺ or P⁵⁺ for Si⁴⁺, large increases in conductivity occur. The solid solution member x=0.6 in Li_4−xSi_1−xP_xS₄ showed high conductivity of 6.4×10^-4 S cm⁻¹ at 27°C with negligible electronic conductivity. The new solid solution, Li_4−xSi_1−xP_xS₄, also has high electrochemical stability up to ∼5 V vs Li at room temperature. All-solid-state lithium cells were investigated using the Li_3.4Si_0.4P_0.6S₄ electrolyte, LiCoO₂ cathode and In anode.     

Kinetics and mechanism of gold dissolution in thiourea solutions: Effect of sulfide ions

Chronoamperograms for gold in solutions containing 0.1 M thiourea, 0.5 M H₂SO₄, and catalytically active sulfide ions at the concentration c ₁ from 1 × 10^?5 to 4 × 10^?5 M are obtained at different potentials with the aid of an automated setup intended for renewing the electrode surface directly in the solution by cutting off a thin surface layer of the metal. It is shown that the results of measurements of the current practically coincide at a constant value of the product c ₁ t, where t is the time period elapsed after the renewal of the electrode surface. Such a coincidence testifies to a diffusion nature of processes that hamper accumulation of sulfide ions at the gold surface. This fact permitted the use of a procedure developed previously for the calculation of polarization curves at constant values of surface coverage θ by catalytically active ions. At θ = const, the voltammetric curves for gold in sulfide-containing thiourea solutions are shown to correspond to the Tafel equation. With the surface coverage increasing, the effective values of the exchange current i ₀, transfer coefficient α, and anodic reaction order with respect to thiourea P _a increase from the values i }~ 10^?5 A cm^?2, α }~ 0.12, and P _a = 0.2, which are characteristic of pure solutions, to 2 × 10^?4 A cm^?2, α }~ 0.5, and P _a = 1.1 (at θ }~ 0.5). An interpretation to the established regularities is given.     

Tricarbonyl complexes of rhenium(I) and technetium(I) with thiourea derivatives

fac-[M(CO)₃X₃]²⁻ complexes (M=Re, X=Br; M=Tc, X=Cl) react with thiourea derivatives under formation of stable rhenium(I) and technetium(I) complexes. The composition of the products can be controlled by the steric requirements of the ligands and their ability to form chelates.The products of reactions with tetramethylthiourea, Me₄tu (I), N,N-diethylthiocarbamoylbenzamidine, H₂Et₂tcb (II), and morpholinylthiocarbamoylbenzamidine, H₂morphtcb (III), have been studied by X-ray crystallography showing that the products belong to three different structural types. A mononuclear complex of the composition fac-[Re(CO)₃Br(Me₄tu)₂] has been isolated with tetramethylthiourea, whereas the thiocarbamoylbenzamidines deprotonate and act as N,S-chelating ligands. This results in the formation of a dimeric [Tc(CO)₃(HEt₂tcb-N,S)]₂ complex with a central, almost square Tc₂S₂ unit and a monomeric compound of the composition [Tc(CO)₃(Hmorphtcb-N,S)(H₂morphtcb-S)]. The latter compound contains a neutral, S-bonded morpholinylthiocarbamoylbenzamidine in the unusual imine form in addition to a chelate-bonded Hmorphtcb⁻ ligand.     

High-Pressure Synthesis and Crystal Structure of B2S3

Two new high-pressure phases of binary boron-sulfur compounds, B₂S₃-II and B₂S₃-III, were synthesized at 3-6.2 GPa. A single crystal of B₂S₃-III was grown and the structure was determined (tetragonal, space group I4₁/a, a=16.086(2) Å, c=30.488(4) Å; V=7888(1) ų, Z=100, R=3.0% and R_w=2.8% for 3047 observed data [I>3.00σ(I)]. The structure of B₂S₃-III consists of two kinds of macrotetrahedra built up from 20 and 34 BS₄-tetrahedra. These macrotetrahedra connect each other to form an interpenetrating zincblende-type structure by sharing BS₄-tetrahedra at the corners of those. B₂S₃-III is anticipated having a rather disordered structure. From the UV-Vis diffuse reflectance spectrum, the optical band gap of B₂S₃-III was estimated to be 3.7 eV.     

Carbon dioxide reduction under visible light: a comparison of cadmium sulfide and titania photocatalysts

1. Download : Download high-res image (135KB)
2. Download : Download full-size image

     

芥子气模拟剂2-氯乙基乙基硫醚的光催化降解

利用连续流动微反、原位红外和GC/MS等手段考察了芥子气模拟剂2-氯乙基乙基硫醚（2-CEES）在P25 TiO2上的光催化降解反应,证实CO2和H2O是这个反应的最终产物.详细的跟踪分析表明,除了CO2和H2O外,在反应的气相混合物中可检测到C2H4、CH3CHO、CH4、CO、HCl和H2S；少量小分子的羧酸、醚和砜；微量C2H5SC2H5、C2H5S2C2H5、C2H5SC2H4Cl和CH2ClCH2Cl等中间产物;在反应后的催化剂表面可检测到C2H5S2C2H5、C2H5SC2H4OH、C4H9S2C2H5和C2H5S2C2H4OH、等物.根据这些结果提出了2-CEES光催化降解的反应机理,推断2-CEES的光催化降解涉及脱氯、C－S键断裂、有机硫化物光聚合和裂解等复杂过程最终转化为CO2和H2O.认为各种硫物种在表面的积聚引起了催化剂的缓慢失活.     

Pt羰基簇合物在NaY内的合成机理

利用IR，EXAFS, ~(13)CO同位素交换反应及与NO作用等手段研究了Pt羰基簇合物[Pt_3(CO)_6]~(2-)_n(n＝3,4)在NaY分子筛超笼内的合成机理．在氧化样品Pt~(2+)/NaY上300－373 K的还愿羰基化过程中，首先Pt~(2+)与CO反应生成PtO(CO)物种(波数σ_(CO)＝2110 cm~(-1))，然后聚集成“Pt_3(CO)_6”(σ_(CO)＝2112，1896和1841 cm~(-1))，最后生成深绿色的Pt羰基簇合物Pt_(12)(CO)_(24)]~(2-)/NaY(σ_(CO)＝2080，1824 cm~(-1))．“Pt_3(CO)_6”的羰基在室温下能迅速地与~(13)CO发生交换，而[Pt_3(CO)_6]~(2-)_n(n＝3,4)的羰基与~(13)CO的同位素交换即使在343 K也进行得很慢，室温下，NO能逐步破坏Pt羰基簇合物的层间和层内Pt－Pt键，得到中间物种“Pt_3(CO)_6”和PtO(CO)，同时在气相产生CO_2和N_2O．而由上述两中间物种出发，300－353 K温度下，在CO气氛中的还原羰基化又能可逆地得到原羰基簇合物．     

联吡啶铁/H2O2体系在可见光下降解芥子气模拟剂2-CEES

采用联吡啶铁/H2O2体系在可见光照射条件下(λ>450nm)降解芥子气模拟剂2-氯乙基乙基硫醚(2-CEES).考察了不同反应条件下的降解效果,通过EPR分析确定了反应过程中产生的高活性物种,利用GC-MS和NMR等方法分析了反应的产物,跟踪了反应过程中TOC的变化,并根据结果对2-CEES光催化降解的反应机理进行了探讨.