Spectroscopic characterization of alkaline earth uranyl carbonates

A series of alkaline uranyl carbonates, M[UO₂(CO₃)₃]·nH₂O (M=Mg₂, Ca₂, Sr₂, Ba₂, Na₂Ca, and CaMg) was synthesized and characterized by inductively coupled plasma mass spectrometry (ICP-MS) and atomic absorption spectrometry (AAS) after nitric acid digestion, X-ray powder diffraction (XRD), and thermal analysis (TGA/DTA). The molecular structure of these compounds was characterized by extended X-ray absorption fine-structure (EXAFS) spectroscopy and X-ray photoelectron spectroscopy (XPS). Crystalline Ba₂[UO₂(CO₃)₃]·6H₂O was obtained for the first time. The EXAFS analysis showed that this compound consists of (UO₂)(CO₃)₃ clusters similar to the other alkaline earth uranyl carbonates. The average U-Ba distance is 3.90±0.02 Å.Fluorescence wavelengths and life times were measured using time-resolved laser-induced fluorescence spectroscopy (TRLFS). The U-O bond distances determined by EXAFS, TRLFS, XPS, and Raman spectroscopy agree within the experimental uncertainties. The spectroscopic signatures observed could be useful for identifying uranyl carbonate species adsorbed on mineral surfaces.     

Graded regulation technology for enhanced oil recovery and water shutoff in pore-cavity-fracture carbonate reservoirs

Although a single type of chemical agent (eg, gels, microspheres, surfactants, etc.) has achieved some effects in enhanced oil recovery of carbonate reservoirs, for pore-cavity-fracture carbonate reservoirs, the use of a single type of chemical agent does not perform well. The main objective of this study is to study the effect of different types of chemical agents in enhanced oil recovery of complex carbonate reservoirs. In order to determine the screening principle of chemical agents, the types of water channeling in the North Troyes reservoir were analyzed. For complex fractures, step by step plugging, multi-agent and multi-slug comprehensive intervention is carried out to ensure the plugging of high-permeability channels and inhibit the seepage of large channels. It can plug channeling fracture channel, adjust secondary dominant channel and reduce matrix flow resistance, so as to expand macroscopic swept volume and improve microscopic water flooding efficiency. The results show that it is difficult to comprehensively control water channeling in pore-cave-fracture carbonate reservoir, and the reservoir heterogeneity in the test area can be improved by mixing different types of control and flooding agents and carrying out deep profile control. The plugging rate of gel is 97.18 %, and the oil–water selection ratio is 0.45 in fractured core; the expansion rate of nano - microspheres is more than 3 times; the wetting modifier can improve the imbibition oil displacement efficiency by 14.76%, and the test result shown that nano - microspheres and wetting modifier have good synergistic oil displacement effect. The field application result shown that daily oil production of oil well in the test area increased by 5.0 m³/d and the daily water rate decreased by 19.0% compared with that before the control flooding. The findings of this study can help for better understanding of enhanced oil recovery in pore-cave-fracture carbonate reservoir.     

双电极法现场快速检测地下水和湖水中碳酸氢根和碳酸根

地下水和湖水中碳酸氢根( HCO-3)和碳酸根( CO2-3)含量是地球化学碳行为和碳循环的重要表征,但两种离子的浓度易受环境影响而改变,因此,地下水和湖水中HCO-3和CO2-3真实含量的测定一直是个难题。实验利用CO2的水解平衡,通过pH电极和二氧化碳电极联用,建立了HCO-3和CO2-3现场快速测定的新方法,解决了地下水和湖水中HCO-3和CO2-3真实含量的测定难题。研究结果表明,在pH=4.8±0.1的底液中, HCO-3和CO2-3的线性范围分别为0.027~570 mg/L和1.25×10-8~39.7 mg/L。共存的金属离子、强酸阴离子(K+、Na+、Mg2+、Cl-、SO2-4,100 mg/L)、弱酸阴离子和弱酸(HSO-3、NO-2、HOAc,50 mg/L)对测定干扰小于5%。实际水样加标实验回收率在95.2%~99.2%之间,相对标准偏差为2.6%~3.7%。与酸碱滴定法进行对比,本方法的准确性良好。但方法受温度影响,因此标准溶液与样品应在同一温度下测量。总体而言,双电极法灵敏、快速、经济且电极携带方便、操作简单、对环境要求不高,十分适合现场和室内一般自然水体的快速检测。本方法已成功应用于青海省地下水和青海湖湖水中HCO-3和CO2-3的现场测定。实验表明,海东地区地下水样品pH在6.4~7.4之间,HCO-3含量为234~4096 mg/L,CO2-3含量为0.16~1.89 mg/L;青海湖湖水样品pH≈8.7,HCO-3含量范围在1.36~1.86 g/L,CO2-3含量在32.3~43.9 mg/L,与文献结果吻合。     

桑蚕丝素蛋白初始结构对其矿化作用的影响

以碱金属离子诱导桑蚕丝素蛋白溶液发生构象转变, 研究了蛋白质初始结构对其矿化作用的影响. FT-IR, XRD和SEM等测试结果显示, 未经任何处理的桑蚕丝素蛋白溶液矿化后形成片状复合物, 其无机相以二水磷酸氢钙(DCPD)为主; 而经过K^＋和Na^＋金属离子处理后, 桑蚕丝素溶液的结构由无规线团/螺旋构象向β-折叠发生转变, 矿化后成纤维状, 并相互结合呈现纳米级的三维多孔结构, 其无机相以热力学稳定的羟基磷灰石(HA)为主. 可以认为, 丝素蛋白结构转化为较伸展的β-折叠后, 使得更多的亲水基团暴露在外面, 在丝素蛋白分子不断凝聚成纤过程中, HA结晶快速生长并附着在这些微纤上, 最终形成纤维状的丝素蛋白/HA复合物. 该结果为阐明蛋白质的生物矿化过程及其调控机理提供了理论依据, 同时可以从矿化复合物的形成来反映这些微量元素可能对骨组织形成的影响, 为临床骨组织的修复提供一定的参考.     

CO2-3掺杂纳米羟基磷灰石晶体的合成与表征

CO2-3掺杂是提高纳米羟基磷灰石（n-HA）生物活性的有效方法之一。以 Ca（NO3）2·4H2O 和Na3PO4·12H2O为主要原料,Na2CO3作为CO2-3来源,合成纳米碳羟基磷灰石（n-CHA）晶体。采用TEM , XRD ,FTIR ,RS对合成晶体形貌和结构进行表征。结果表明：合成的n-HA晶体长度约为60～80 nm ,宽度在20～30 nm之间,形状为针状,具有良好的结晶度,与自然骨磷灰石形貌相似;n-CHA晶体随CO2-3掺入量的增加,结晶度降低;合成的 n-CHA晶体的晶胞参数 a值随着CO2-3加入量的增大不断收缩,但 c值增大,参数比c/a值增大,符合B型取代（取代PO3-4）的晶胞参数变化规律。红外谱图中,872 cm -1附近出现AB混合型取代（同时取代O H -,PO3-4）的CO2-3面外弯曲振动特征红外峰,同时CO2-3的不对称伸缩振动红外峰在1454和1420 cm -1附近出现分裂峰,1540 cm -1附近出现弱CO2-3峰;1122 cm -1附近出现CO2-3对称伸缩振动拉曼峰,1071 cm -1附近出现CO2-3的B型替代特征拉曼峰,通过计算PO3-4,CO2-3,O H -拉曼峰的积分面积比PO3-4/CO2-3,O H -/CO23,PO3-4/O H -,表明CO2-3在替换时,先以B型为主,随着CO2-3掺入量的增加,发生A型替代（取代O H -）。实验结果表明,合成的磷灰石晶体为B型取代（取代PO3-4）为主的AB混合型取代的 n-CHA。与人骨磷灰石晶体在形态、尺寸、晶体结构和生长方式上具有相似性,可称为类骨磷灰石。     

Thermodynamic Investigation of Phase Equilibria in Metal Carbonate–Water–Carbon Dioxide Systems

Summary.  Solubility measurements as a function of temperature have been shown to be a powerful tool for the determination of thermodynamic properties of sparingly-soluble transition metal carbonates. In contrast to calorimetric methods, such as solution calorimetry or drop calorimetry, the evaluation of solubility data avoids many systematic errors, yielding the enthalpy of solution at 298.15 K with an estimated uncertainty of ±3 kJ · mol⁻¹. A comprehensive set of thermodynamic data for otavite (CdCO₃), smithsonite (ZnCO₃), hydrozincite (Zn₅(OH)₆(CO₃)₂), malachite (Cu₂(OH)₂CO₃), azurite (Cu₃(OH)₂(CO₃)₂), and siderite (FeCO₃) was derived. Literature values for the standard enthalpy of formation of malachite and azurite were disproved by these solubility experiments, and revised values are recommended. In the case of siderite, data for the standard enthalpy of formation given by various data bases deviate from each other by more than 10 kJ · mol⁻¹ which can be attributed to a discrepancy in the auxiliary data for the Fe²⁺ ion. A critical evaluation of solubility data from various literature sources results in an optimized value for the standard enthalpy of formation for siderite. The Davies approximation, the specific ion-interaction theory, and the Pitzer concept are used for the extrapolation of the solubility constants to zero ionic strength in order to obtain standard thermodynamic properties valid at infinite dilution, T = 298.15 K, and p = 10⁵ Pa. The application of these electrolyte models to both homogeneous and heterogeneous (solid-solute) equilibria in aqueous solution is reviewed. Received June 26, 2001. Accepted July 2, 2001     

Gas Forming Processes within Lignite Mining Dumps

Abstract

Gas analyses of the soil atmosphere of lignite mining dumps yielded increased contents of carbon dioxide. To get information about the potential sources and the carbon dioxide releasing capacity of the dumps, samples of dump material were investigated for their contents and isotopic compositions of organic and inorganic carbon as well as the carbon dioxide in the soil atmosphere. The contents of organic and inorganic carbon were found to vary depending on type of dump material. The isotopic composition of the organic carbon ranges between ?24.5 and ?26.5‰, which is typical for humous materials. The carbonates are found to be of marine origin (δ¹³C: +0.5 to ?1.1‰). By means of the isotope investigations it could be shown that the carbon dioxide in the lignite mining dump arises from these two different sources. Mixing ratios can be calculated using the isotope balance equation. Both reaction paths are associated with oxygen consumption and do not result in an increased gas pressure within the dump.     

Hydroxyapatite-poly(d,l-lactide) Nanografts. Synthesis and Characterization as Bone Cement Additives

This paper reports the creation of hydroxyapatite/polyester nanografts by “graft-from” polymerization of d,l-lactide with [Ca₅(OH)(PO₄)₃]₂ as the initiator and tin(II)-2-ethylhexanoate as the catalyst. Model polymerizations were performed with cyclooctanol as initiator to confirm the grafting on the surface of the hydroxyapatite nanocrystals. Polymers with the highest molecular mass (M_n) between 4250 Da (cyclooctanol) and 6100 Da (hydroxyapatite) were produced. In both cases the molecular mass distributions of the polymers formed were monomodal. The materials obtained were characterized by size-exclusion chromatography, NMR and FT-IR spectroscopy, and thermal methods. Their suitability as additives for commercial bone cement (Simplex P Speedset, Stryker Orthopaedics) has been confirmed by thermal analysis techniques and mechanical testing. The results obtained show that addition of the hydroxyapatite/ polyester nanografts improved both thermal and mechanical properties of the bone cement.