Conduction stability of high-density polyethylene/carbon black composites due to electric field action

Conduction stability of high-density polyethylene/carbon black (HDPE/CB) composites with a CB volume fraction slightly above the percolation threshold is studied in relation to electric field action at various ambient temperatures below the melting point of HDPE. It is found that resistance of the composites shows considerable changes after the electric field is switched off. Influence of irradiation crosslinking of HDPE on the conduction stability is also discussed.     

铝原子簇上化学吸附的尺度效应及其理论模型

对铝原子簇Al_n(n=1～10,12,13)已报导过的理论预测几何构型进行合理选择, 用量子化学CNDO/2法研究了单分子一氧化碳在这些簇上取不同吸附位形时的吸附作用。结果表明吸附强度随簇尺度的变化呈“幻数”特性: Al_2、Al_6、Al_(12)簇具有特别高的吸附能, 与实验观测结果相符。采用作者建议的推广电子壳模型可合理解释这一尺度效应。对Al_(12)和Al_(13)簇电子结构的分析进一步支持了壳模型的观点。随着簇的增大, 尺度效应逐步减弱并趋向于体相铝的性质。     

Carbon Nanotubes Based Nanoelectrode Arrays: Fabrication,Evaluation, and Application in Voltammetric Analysis

Fabrication, electrochemical characterization, and applications of low‐site density carbon nanotubes based nanoelectrode arrays (CNTs‐NEAs) are reported in this work. Spin‐coating of an epoxy resin provides a new way to create the electrode passivation layer effectively reducing electrode capacitance and current leakage. Cyclic voltammetry showed the sigmoidal shape curves with low capacitive current and scan‐rate‐independent limiting current. Square‐wave voltammetry showed well‐defined peak shapes in voltammograms of K₃Fe(CN)₆ and 4‐acetamidophenol (acetaminophen) and the peak currents to be proportioned to their concentrations, demonstrating the feasibility for voltammetric analysis of the CNTs‐NEAs. The CNTs‐NEAs were also used successfully for voltammetric detection of trace concentrations of lead(II) at ppb level at first‐time. The CNTs‐NEAs provide an excellent platform for ultra sensitive electrochemical sensors for chemical and biological sensing.     

An Inexpensive Biosensor for Uric Acid Determination in Human Serum by Flow‐Injection Analysis

An inexpensive and easy to construct miniaturized biosensor is described for the determination of uric acid in biological fluids. The amperometric biosensor was prepared by using a carbon paste electrode prepared with uricase from Arthrobacter globiforms and tetracyanoquinodimethane as electron transfer mediator. When incorporated into a flow‐injection system it was enabled to perform 50 measurements/h of uric acid in the analytical range of 1–100 μmol dm^?3 with a relative standard deviation of 0.20% (n=14). The system was applied to human serum samples analysis providing good data correlation with those obtained by the reference spectrophotometric method. A linear relationship AM (μmol dm^?3)=1.02 (±0.05) SP (μmol dm^?3) ?0.12 (±0.13) was obtained evidencing the absence of significant error. The constructed biosensor was successfully used for at least four months (250 assays) with only a 13% of decrease in the enzymatic activity.     

石墨烯的制备、功能化及在化学中的应用

石墨烯是最近发现的一种具有二维平面结构的碳纳米材料, 它的特殊单原子层结构使其具有许多独特的物理化学性质. 有关石墨烯的基础和应用研究已成为当前的前沿和热点课题之一. 本文仅就目前石墨烯的制备方法、功能化方法以及在化学领域中的应用作一综述, 重点阐述石墨烯应用于化学修饰电极、化学电源、催化剂和药物载体以及气体传感器等方面的研究进展, 并对石墨烯在相关领域的应用前景作了展望.     

二氧化碳同环氧丙烷交替共聚用催化剂的研究

探讨了有机金属催化剂的组成及其对二氧化碳同环氧丙烷交替共聚产物结构的影响,发现二乙基锌—助剂体系的催化活性按如次顺序递降:二乙基锌—连苯三酚>二乙基锌—间苯二酚>二乙基锌—对苯二胺>二乙基锌—亚乙基脲。若用三异丁基铝代替二乙基锌同连苯三酚构成催化剂,则失去对二氧化碳同环氧丙烷交替共聚反应的活性同时,著者发现二乙基锌—二元芳胺催化体系与二乙基锌—二元酚催化体系的催化活性规律完全不同。     

石墨烯的制备、功能化及在化学中的应用

石墨烯是最近发现的一种具有二维平面结构的碳纳米材料, 它的特殊单原子层结构使其具有许多独特的物理化学性质. 有关石墨烯的基础和应用研究已成为当前的前沿和热点课题之一. 本文仅就目前石墨烯的制备方法、功能化方法以及在化学领域中的应用作一综述, 重点阐述石墨烯应用于化学修饰电极、化学电源、催化剂和药物载体以及气体传感器等方面的研究进展, 并对石墨烯在相关领域的应用前景作了展望.     

Solubilization and applications of single-walled carbon nanotubes into aqueous and organic media by the use of nanometer size-controlled fluoroalkyl end-capped oligomeric aggregates

We have studied on the solubilization of single-walled carbon nanotubes (SW-CNTs) into aqueous and organic media by the use of a variety of nanometer size-controlled fluorinated self-assemblies, which were formed by the aggregations of end-capped fluoroalkyl segments in fluoroalkyl end-capped acrylic acid oligomers [R_F-(ACA)_n-R_F], N,N-dimethylacrylamide oligomers [R_F-(DMAA)_n-R_F], acryloylmorpholine oligomers [R_F-(ACMO)_n-R_F], and N-(1,1-dimethyl-3-oxobutyl)acrylamide oligomers [R_F-(DOBAA)_n-R_F]. Fluorinated self assemblies formed in organic media (colorless solutions) could solubilize SW-CNTs into organic media to afford the transparent pale yellow solutions. The dynamic light scattering measurements showed that the size of fluorinated self-assemblies increased after the solubilization of SW-CNTs into organic media. It was suggested that the solubilization of SW-CNTs into organic media is due to the encapsulation of SW-CNTs into fluorinated assemblies. Fluorinated assemblies were also able to solubilize SW-CNTs into water to give the transparent gray solutions. Among a variety of fluorinated assemblies, fluorinated assemblies formed by R_F-(ACMO)_n-R_F [R_F = CF(CF₃)OC₆F₁₃] oligomer was more effective for the solubilization of SW-CNTs into both aqueous and organic media. Contact angle measurements of dodecane and the fluorescence spectra for poly(methyl methacrylate) cast film modified by fluorinated self-assemblies—SW-CNTs complexes showed that SW-CNTs are dispersed above the PMMA surface.     

Chemical species produced in the reaction between ethanedial (glyoxal) and 5-amino-1,10-phenanthroline and their iron(II) complexes: electrochemical studies and analytical applications

The cyclic voltammetric behavior of carbon paste electrodes modified by direct admixing with the products of the reactions between ethanedial (glyoxal) and 5-amino-1,10-phenanthroline at 100°C and that of their iron(II) complexes is reported. The ligand(s) produced in absence of iron(II) are able to complex iron(II) and copper(II) ions reversibly, but other ions such as nickel(II), cobalt(II), cadmium(II) and manganese(II), if complexed, show no electrochemical activity. Admixing with the products of the reaction in the presence of excess of iron(II) ion, because of high insolubility and fast electron exchange, produces surfaces useful for amperometric detection in continuous-flow systems. The voltammetric and amperometric behavior in the presence of HSO^?₃ ions is reported in order to illustrate this application.     

Separation of carbon nanotubes by frit inlet asymmetrical flow field-flow fractionation

Flow field-flow fractionation (flow FFF), a separation technique for particles and macromolecules, has been used to separate carbon nanotubes (CNT). The carbon nanotube ropes that were purified from a raw carbon nanotube mixture by acidic reflux followed by cross-flow filtration using a hollow fiber module were cut into shorter lengths by sonication under a concentrated acid mixture. The cut carbon nanotubes were separated by using a modified flow FFF channel system, frit inlet asymmetrical flow FFF (FI AFIFFF) channel, which was useful in the continuous flow operation during injection and separation. Carbon nanotubes, before and after the cutting process, were clearly distinguished by their retention profiles. The narrow volume fractions of CNT collected during flow FFF runs were confirmed by field emission scanning electron microscopy and Raman spectroscopy. Experimentally, it was found that retention of carbon nanotubes in flow FFF was dependent on the use of surfactant for CNT dispersion and for the carrier solution in flow FFF. In this work, the use of flow FFF for the size differentiation of carbon nanotubes in the process of preparation or purification was demonstrated.