沥青热解残炭的燃烧特性

与轻质油品(汽油、柴油等)燃烧特性不同,重质燃料油在燃烧时,首先发生燃料的热分解,分解的产物扩散到气相空间发生着火、燃烧,最后剩下固体残炭,然后残炭再着火、燃烧,由于残炭的燃烧属于异相反应,比燃料气与空气的同相反应慢,导致其燃尽时间明显变长,文献[1]给出了沥青和十二烷单滴的燃烧过程温度变化曲线,从曲线可以看出,残炭的燃烧阶段明显比气体的燃尽时间长,而残炭的质量只为沥青质量的10%～20%[2,3]。虽然残炭含量低,但它在整个燃烧过程中占有十分重要的地位;文献[4]利用热重系统研究了渣油热加工的副产物石油焦的燃烧特性,主要从…     

大孔吸附树脂对邻甲酚的吸附行为研究

研究了大孔吸附树脂NDA—909吸附水溶液中邻甲酚的热力学特征，并与Amberlite XAD—4树脂进行了比较．通过吸附动力学实验，初步探讨了初始温度对吸附过程的影响。结果表明，NDA—909对邻甲酚的吸附符合Freundlich经验公式，表现为放热的物理吸附过程．此外吸附速率受颗粒内扩散和其它类型扩散的共同控制。     

糖类物质的毛细管电泳分析

毛细管电泳(CE)是近二十年发展起来的一种新的分离分析技术，它以快速、高效、高灵敏度、所需样品少等优点被广泛应用于各个领域。八十年代末开始应用于糖类物质的分析，并获得了快速发展。本文对毛细管电泳分离分析糖类物质进行了评述，主要集中在多糖的水解、衍生、检测、分析应用及前景等方面。全文引用文献40篇。     

New integrated measurement protocol using capillary electrophoresis instrumentation for the determination of viscosity, conductivity and absorbance of ionic liquid-molecular solvent mixtures

The low vapor pressure and the versatility of the physico-chemical properties of ionic liquids make them really attractive as an alternative for conventional molecular solvents. The knowledge of their physico-chemical properties (viscosity, conductivity, miscibility with organic solvents and anion-cation interactions) has appeared mandatory for better targeting their applications, although it is generally still lacking or incomplete.This work promotes capillary electrophoresis instrumentation as an integrated apparatus for measurement of viscosity, conductivity and absorbance of pure ionic liquids and ionic liquid-molecular solvent mixtures. Compared to current conventional techniques, the assets of this instrumentation for this purpose are the combined availability of a pressure delivery system, power supply, diode array absorbance detector and thermoregulation device, allowing unattended, automatic and easy operation, involving minimum sample handling. Most importantly, the required sample volume can be reduced to about 50 μL, making this protocol very cost-effective. A protocol was optimized with respect to time, sample consumption and data reliability for the determination of these physico-chemical parameters. Ionic liquids selected for method development and validation differed in the nature of their cation (butyl- and ethyl-methylimidazolium) and anion (trifluoromethanesulfonate and bis(trifluoromethanesulfonyl)imide). Various molecular solvents were mixed with these ionic liquids (acetonitrile, methanol, dimethylformamide and trifluoroethanol) and the same physico-chemical properties were determined by optimized methods. The knowledge of these data should be of great support in various application areas, including the development of new separation media for capillary electrophoresis and chromatographic techniques.     

含有羧基配体的蝎型钒氧配合物的合成、结构及其热分解动力学

设计合成了两种新型的以聚吡唑硼酸盐、氨基酸为配体的钒氧配合物VO[phCH2CH(NH2)COO][HB(pz)3](1)和VO(3,5-Me2pz)[HB(3,5-Me2pz)3](CH3COO)(2). 通过元素分析、红外光谱对配合物进行了表征, 并利用单晶X射线衍射技术解析了它们的结构. 非等温热分解动力学研究表明, 配合物1和2的热分解反应都是分两步进行的. 通过计算, 配合物1热分解的第一步反应的可能机理为成核与生长(n=1/4); 第二步反应的可能机理为化学反应. 其非等温动力学方程分别为, dα/dT=(A/β)e-E/RT(1/4)(1-α)[-ln(1-α)]-3 和dα/dT=(A/β)e-E/RT(1-α)2. 分解反应的表观活化能分别是223.52 和331.94 kJ·mol-1; 指前因子ln(A/s-1)分别是49.67 和57.50. 配合物2 热分解的第一步反应的可能机理为化学反应; 第二步反应的可能机理为成核与生长(n=1/2). 其非等温动力学方程分别为, dα/dT=(A/β)e-E/RT(1-α)2, 和dα/dT=(A/β)e-E/RT(1/2)(1-α)[-ln(1-α)]-1. 分解反应的表观活化能分别是300.56 和444.72 kJ·mol-1; 指前因子ln(A/s-1)分别是75.53 和92.50.     

二价金属离子萃取速率常数与软硬酸碱规则

用上升液滴法测定了２－乙基己基膦酸单（２－乙基己基）酯－正辛烷从硝酸介质中萃取镁、钙、锌、镍、铜和铅等二价金属离子的正向初始速率，建立了速率方程，计算出正向萃取反应的速率常数、活化能及活化熵，首次将软硬酸碱规则与金属溶萃取速率常数关联。结果表明，在萃取机理相同时，萃取速率常数的大小与金属离子的软硬酸碱标度一致，即萃取过程中，作为酸的被萃取金属离子，其硬度越大，萃取速率常数亦越大，萃取反应的活化能…     

Diels—Alder reaction. Effect of internal and external factors on the reactivity of diene—dienophile systems

The key factors influencing the Diels—Alder reaction rate at ambient and elevated pressures were elucidated using data on the reactivity of various diene—dienophile systems in usual and Lewis acid-catalyzed Diels—Alder reactions, the reaction enthalpy, complex formation, dissolution, and solvation, and the donor-acceptor properties of the reactants. It was found that taking account of both the orbital interaction energy and the balance of bond rupture and formation energies allows correct prediction of the reaction rate in the absence or in the presence of Lewis acids.     

Role of isoconversional methods in varying activation energies of solid-state kinetics: I. isothermal kinetic studies

Solid-state kinetics was developed from kinetic concepts for reactions in homogeneous phase systems, which has created considerable debate over issues such as variable activation energy. This behavior has been viewed by some as a violation of basic chemical kinetic principles. Variation in activation energy has been detected by isoconversional or ‘model-free’ calculation methods. The relationship between different calculation methods and the occurrence of variable activation energy was investigated in this work by employing model-fitting and isoconversional methods to analyze simulated isothermal data. In addition, these approaches were applied for sulfameter-dioxolane solvate desolvation data. We showed that variable activation energy is of two types—a true variation that results from the complex nature of the solid-state process and an artifactual one resulting from the use of some isoconversional methods.