What theoretical and/or chemical significance is to be attached to the magnitude of an activation energy determined for a solid-state decomposition?

This critical survey argues that the theory, conventionally used to interpret kinetic data measured for thermal reactions of initially solid reactants, is not always suitable for elucidating reaction chemistry and mechanisms or for identifying reactivity controls. Studies of solid-state decompositions published before the 1960s usually portrayed the reaction rate as determined by Arrhenius type models closely related to those formulated for homogeneous rate processes, though scientific justifications for these parallels remained incompletely established. Since the 1960s, when thermal analysis techniques were developed, studies of solid-state decompositions contributed to establishment of the new experimental techniques, but research interest became redirected towards increasing the capabilities of automated equipment to collect, to store and later to analyze rate changes for selected reactions. Subsequently, much less attention has been directed towards chemical features of the rate processes studied, which have included a range of reactants that is much more diverse than the simple solid-state reactions with which early thermokinetic studies were principally concerned. Moreover, the theory applied to these various reactants does not recognize the possible complexities of behaviour that may include mechanisms involving melting and/or concurrent/consecutive reactions, etc. The situation that has arisen following, and attributable to, the eclipse of solid-state decomposition studies by thermal analysis, is presented here and the consequences critically discussed in a historical context. It is concluded that methods currently used for kinetic and mechanistic investigations of all types of thermal reactions indiscriminately considered by the same, but inadequate theory, are unsatisfactory. Urgent and fundamental reappraisal of the theoretical foundations of thermokinetic chemical studies is now necessary and overdue. While there are important, but hitherto unrecognized, delusions in thermokinetic methods and theories, an alternative theoretical explanation that accounts for many physical and chemical features of crystolysis reactions has been proposed. However, this novel but general model for the thermal behaviour and properties of solids has similarly remained ignored by the thermoanalytical community. The objective of this article is to emphasize the now pressing necessity for an open debate between these unreconciled opinions of different groups of researchers. The ethos of science is that disagreement between rival theories can be resolved by experiment and/or discussion, which may also strengthen the foundations of the subject in the process. As pointed out below, during recent years there has been no movement towards attempting to resolve some fundamental differences of opinion in a field that lacks an adequate theory. This should be unacceptable to all concerned. Here some criticisms are made of specific features of the alternative reaction models available with the stated intention of provoking a debate that might lead to identification of the significant differences between the currently irreconciled views. This could, of course, attract the displeasure of both sides, who will probably criticise me severely. Because I intend to retire completely from this field soon, it does not matter to me if I am considered to be ‘wrong’, if it contributes to us all eventually agreeing to get the science ‘right’.     

Pt/HM和Pd/HM催化剂表面氧的恢复与供出活化能测定

催化氧化是最重要的工业催化反应之一。七十年代以来,关于氧化催化剂的基础研究取得了长足的进步,采用各种手段对氧化催化剂的表面及体相氧种进行了考察。本文作者根据研究实用氧化催化剂的经验,结合控制论方法,亦提出了多相催化氧化反应的集团结构适应性规律。近年来,作者用TPD和吸附平衡法研究了V_2O_5/SiO_2催化剂表面氧的种类、数目和供出活性,较好地关联了催化氧化的一些事实,使以上规律更趋于半定量化。在多相氧化反应中,催化剂表面活性氧不断处于供出和恢复的循环之中,催化剂表面氧中心的供     

分子轨道图形理论中对称轴定理

本文试图以浅显明确的形式描述对称轴定理，使之能与对称面定理相媲美，并对对称轴定理作一定的扩展，给出分子轨道构造定理。     

Structures and energies of seleno derivatives of biuret.Ab Initio comparative studies of diselenobiuret, selenobiuret, and selenothiobiuret

Ab initio studies (LCAO-MO method) on conformers of three seleno derivatives of the biuret molecules diselenobiuret [I], selenobiuret [II], and selenothiobiuret [III] were carried out at the Hartree-Fock (HF) and MP2 levels. The molecular geometries of these species were fully optimized at the HF level and characterized by analysis of the harmonic vibrational frequencies using a split-valence triple-zeta basis set augmented by a set ofd polarization functions on heavy atoms andp polarization functions on hydrogen atoms [TZP(d, p)]. The total energies of the HF-optimized structures were calculated at the MP2 (frozen core) level using a larger TZP (2df, 2pd) basis set. The potential energy searches revealed a total of 11 minimum-energy conformers (assigned astrans-trans, trans-cis, cis-trans, andcis-cis) and seven transition-state species for the title molecules. The two predicted conformers for diselenobiuret (Ia=trans-trans andIc=cis-cis) are characterized byC ₂ and the third byC _s symmetry. For selenothiobiuret two forms (IIIa=trans-trans andIIId=cis-cis) possessC ₁ and two (IIIb=trans-cis andIIIc=cis-trans) possessC _s symmetries, respectively. For selenobiuret, four formsIIa=trans-trans (C₁),IIb=trans-cis (C _s),IIc=cis-trans (C ₁), andIId=cis-cis (C₁), were obtained as a result of gradient optimization. Comparison of the relative energies for the considered species indicated that thecis-trans forms are the most stable conformations for all three systems at both the HF and MP2 levels of theory.     

Preconcentration and Separation Procedures for the Spectrochemical Determination of Platinum and Palladium

Low concentrations of Pt and Pd in industrial (µgg^–1 level) and environmental samples (ngg^–1 level) together with the complexity of the matrix causing many interferences during the determination of noble metals often require elaboration and application of pre-concentration/matrix separation procedures before detection of the analyte. Different pre-concentration/matrix separation procedures applied prior to the determination of Pt and Pd by atomic spectrometric techniques are reviewed and critically compared taking into account potential interferences. The methods studied are divided into 5 groups including precipitation and coprecipitation, liquid–liquid extraction, solid phase extraction, electrochemical pre-concentration and biosorption. The main analytical problems occuring during sample preparation and storage are discussed.     

氯氮平、去甲氯氮平及奥氮平的高效液相色谱电化学检测特性的研究

 采用高效液相色谱安培电化学检测法 ,考察了氯氮平、去甲氯氮平和奥氮平在不同 pH值流动相下的色谱分离情况及其色谱峰高与检测电压的关系。结果表明 ,氯氮平、去甲氯氮平和奥氮平的保留时间均随流动相 pH值的升高而延长 ;在pH值为 4 5 6和 5 5 6的流动相中 ,均可实现基线分离。 3种化合物的色谱峰高与检测电压之间呈典型的“S”型曲线 ,pH值升高时该曲线均左移。氯氮平、去甲氯氮平和奥氮平的检测电压必须大于产生最大氧化电流的最低电压才能得到稳定的检测电流。这种典型的“S”型伏安曲线对于化合物的定量和定性检测具有重要意义。     

二甲苯异构体双电荷离子和单电荷离子的动能谱研究

利用质量分析离子动能谱和碰撞诱导解离技采研究了邻、间、对二甲苯分子在电子轰击质谱中产生的双电荷离子[C8H10]2+、[C8H9]2+和单电荷离子[C8H10]+。根据测定的电荷分离反应的释放动能T和由此估算的双电荷离子电荷分离反应过渡态两电荷间距R,推测出过渡态的结构,利用单电荷离子[C8H10]+的MIKES/CID谱可区分邻二甲苯与间、对二甲苯异构体.     

1,1,4,4-Tetranitrobutane-2,3-diol and its derivatives. 5. Reaction of 1,1,4,4-tetranitrobutane-2,3-diol with formaldehyde; synthesis and crystal structure of 4,4-dinitro-2,3-dihydroxytetrahydrofuran

1,1,4,4-Tetranitrobutane-2,3-diol reacts with formaldehyde, forming 2,2-dinitropropane-1,3-diol or a cyclic ether — 4,4-dinitro-2,3-dihydroxytetrahydrofuran — as a function of the reaction conditions.Institute of Chemical Physics, Chernogolovka, Russian Academy of Sciences, 142432 Chernogolovka. Translated fromIzvestiya Akademii Nauk, Seriya Khimicheskaya, No. 12, pp. 2755–2759, December, 1992.     

Thermodynamic study of the three isomers of bromo and iodobenzoic acids. Part II

Using our technique of combustion of small amount of a substance, we determined by calorimetry the standard molar enthalpy of formation in the condensed state and atT=298.15 K of the three isomers of bromo and iodobenzoic acids. Associating to these values their standard molar enthalpies of sublimation previously measured, it was possible to determine their standard molar enthalpies of formation in the gaseous state and atT=298.15 K. The experimental values of the thermodynamic properties _f H _m ^o (cr, 298.15 K), _f H _m ^o (cr, 298.15 K), _sub H _m ^o (298.15 K), and _f H _m ^o (g, 298.15 K) are given for the two series. From the experimental value of the standard molar enthalpy of atomization, it was possible to determine an enthalpy value for the C_b-Br and C_b-I bonds. The experimental and theoretical values of the resonance energy of bromo and iodobenzoic acids are compatible. The relative stability of some monosubstituted derivatives of benzoic acid studied in our laboratory is also discussed.Part I is concerned with Ref. 22 (for bromobenzoic acids) and with Ref. 23 (for iodobenzoic acids).     

丙烯腈的悬浮聚合

<正> 适用于普通溶液纺丝加工成形的聚丙烯腈(PAN)的分子量一般在5—8万范围内,近年来发展起来的冻胶纺丝方法使得(?)>4.0×10~5的超高分子量PAN也可以纺丝成形,成为制备高强高模PAN纤缎的有效方法之一。随着PAN材料应用领域的开拓,合成超高分子量的PAN是一个首要解决的问题。