回旋电子束横纵速度比测试技术

通过对回旋电子束形成的电位和电场分布,推导出电子束横纵速度比测量的计算式。提出将电子束作传输线内导体等效,采用陶瓷电容分压器来测量速度比的方法。介绍了该测量装置的设计和加工工艺,及陶瓷电容分压器的标定方法和结果分析,并介绍了初步的原理性实验结果。该测试方法装置简单,测试电子束横纵速度比时不会破坏电子束的特性,能够做到在回旋管运行时在线测量,实时监测电子束质量。     

同轴快沿脉冲源研制与测试

利用脉冲高压陶瓷电容器和高气压小间隙开关,研制了60 kV同轴式高压快沿脉冲源。利用自行研制的薄膜式电容分压器和同轴式电阻分压器对快沿脉冲源的输出参数进行测量,分析了薄膜式电容分压器的测试原理,对电容分压中二级电阻分压器元件的参数进行了优化。当脉冲源负载为50 W时,测得脉冲源输出电压的前沿小于2.3 ns,半高宽约28 ns,符合IEC电磁脉冲的最新标准。     

Label free capacitive immunosensor for detecting calpastatin — A meat tenderness biomarker

An immunological capacitive biosensor for calpastatin was developed, optimized and applied for the analysis of meat extract samples. Anti-calpastatin antibody was immobilized on a gold electrode modified with a self-assembled monolayer of mercaptoundecanoic acid and Protein A from Staphylococcus aureus, and the obtained immunosensor was inserted as the working electrode in an electrochemical cell of a flow injection system. The dynamic range of the sensor was 20 to 160 ng/mL calpastatin. The electrode could be regenerated and re-used for more than 7 days with minimal reduction in sensitivity. For the analysis of real samples, the target analyte was extracted from the Longissimus dorsi muscle from beef carcasses directly after slaughtering. The extract was analyzed both with the developed immunosensor and microtiter plate ELISA, and a good correlation was obtained. However the immunosensor offers advantages of speed, simplicity, sensitivity and possibility for miniaturization over conventional assays for calpastatin quantification.     

Capacitive Chemical Sensor for Thiopental Assay Based on Electropolymerized Molecularly Imprinted Polymer

A novel capacitive sensor based on electropolymerized molecularly imprinted polymer (MIP) for thiopental detection is described. The molecularly imprinted film as a recognition element was prepared by electropolymerization of phenol on a gold electrode in the presence of thiopental (template). Cyclic voltammetry and capacitive measurements were used for characterization and evaluation of the polymeric film. The template molecules were removed from the modified electrode surface by washing with an ethanol:water solution. The sensor’s linear response range was between 3 and 20 µM, with a detection limit of 0.6 µM. The proposed sensor exhibited good selectivity, reproducibility. Satisfactory results were obtained in the direct detection of real samples.     

Disposable Electrodes for Capacitive Immunosensor

Disposable electrodes were fabricated by coating chromium (5 nm) and gold (200 nm) on glass strips (5.0 mm×25.4 mm) and used in a label‐free immunosensor. Human serum albumin (HSA) and its antigen (anti‐HSA) were used as a model system. Electropolymerization of o‐phenylenediamine was used for the immobilization of anti‐HSA by covalent binding. A linear relationship was obtained in the range from 1.0×10^?14 to 1.0×10^?9 M with a limit of detection of 8.0×10^?15 M. Each modified electrode can be reused up to 30 times. The developed system was applied for human serum samples and compared to Albumin BCG method.     

A Contactless Impedance Probe for Simple and Rapid Determination of the Ratio of Liquids with Different Permittivities in Binary Mixtures

Simple contactless cells with planar or tubular electrodes have been designed for measurement of the permittivity of solutions. The cells, connected to an integrated circuit of astable multivibrator, respond primarily to the capacitance component of the cell impedance, the multivibrator frequency depends in a defined manner on the solution permittivity and is readily used as the analytical signal in determinations of the ratios of components in binary liquid mixtures; water solution of methanol, ethanol and dioxane have been tested. The response of the cell with planar electrodes satisfies well the simple theoretical model and both the cells provide results with a sufficient sensitivity, a low LOD value (units of %vol) and a good precision (around 1%rel). The cell simplicity, small dimensions, long‐term stability and the possibility of powering them from a battery make them suitable for hand‐held meters. As an example of application in practice, the content of ethanol was determined in the car fuel petrol.     

Application of a novel electrosynthesized polydopamine-imprinted film to the capacitive sensing of nicotine

The application of novel electrosynthesized polydopamine (PDA)-imprinted film as a recognition element for the capacitive sensing of nicotine is reported. The PDA-imprinted film was electropolymerized directly on the gold electrode surface in the presence of nicotine without an additional self-assembled thiol sublayer. The compact PDA film has various functional groups that aid the imprinting procedure. Furthermore, the film shows good capacitive response since it is insulating in nature and ultrathin. The sensor’s linear response range for nicotine was between 1–25 μmol L⁻¹, with a detection limit of 0.5 μmol L⁻¹. The proposed molecularly imprinted polymer capacitive (MIPC) sensor exhibited good selectivity for nicotine. The reproducibility and repeatability of the MIPC senor were all found to be satisfactory. The results from sample analysis confirmed the applicability of the MIPC sensor to quantitative analysis.     

Determination of liquid water content and dielectric constant in porous media by the capacitive methodDétermination,par la méthode capacitive,de la teneur en eau liquide et de la constante diélectrique dans un milieu poreux

A capacitive sensor-based apparatus has been settled to determine the liquid water amount and dielectric constant in consolidated porous media. This technique relies on the dielectric properties of water, air, and mineral substrate. The experimental procedure is described for successively oven-dried samples at 323 K. It allows us to determine the sample dielectric constant as a function of the sample water amount. For limestones from Caen region, an affine relationship is found at 293 K. This is then compared with other empirical soils data and with existing homogeneisation techniques applied to undeformable heterogeneous dielectrics. To cite this article: T. Fen-Chong et al., C. R. Mecanique 332 (2004).     

Compact,wide bandwidth,multi-channel power dividers based on one-dimensional photonic crystal waveguides

We propose novel compact multiport power dividers based on one-dimensional photonic crystal omnidirectional reflective waveguides. The proposed power dividers have advantages of wide bandwidth, flexible extended output channel number and compact size. The power dividers are numerical simulations using finite-difference time-domain method. Near-complete transmission and uniform at every branch of output power of multi-port power dividers are observed within wide frequency range. For a 1D PhC 1 × 6 power divider, the six output port achieved nearly 16.5% transmission at each arm from 1545 nm to 1553 nm and the size of 1 × 6 power divider is 14.3 μm × 14.3 μm at 1.55 μm operation wavelength.     

All-optical clock frequency divider using Fabry-Perot laser diode based on the dynamical period-one oscillation

We propose and experimentally demonstrate a frequency divider implemented by an optically injected Fabry-Perot laser diode (FP-LD) based on the nonlinear dynamical period-one oscillation. Injected by optical pulses, the FP-LD will oscillate in unstable dynamical period-one (P1) oscillation. Through changing the injected strength, emitting wavelength and bias current of the FP-LD, the oscillating frequencies of the P1 state can be varied. Once one of the harmonic frequencies is adjusted to match the repetition frequency of injected optical clock pulse, the P1 oscillation will be locked, and then a divided clock at the fundamental frequency of the P1 oscillation can be generated. By utilizing this divider, we can achieve the optical clock frequency division of divide-by-two, -three and -four in a wide input frequency range, for instance, of 9.0 to 20.0 GHz for divide-by-two. The influence of injected optical power on the timing jitter of the divided clock is also investigated. It is expected that this frequency divider can be applied to high frequency division exceeding 100 GHz due to its fast P1 oscillation.