基于labview与容栅传感器的液位测控系统

根据容栅传感器的检测原理,设计了一套基于LabVIEW和容栅传感器的液位精密测控系统,精度达0.05ml。利用容栅传感器输出的电容信号经信号调理模块输入msp430单片机处理并精密控制液位,采用LabVIEW设计系统监控界面程序,实现系统数据的显示、存储、绘图以及人机控制测定仪工作等功能。可配装为数显测定仪和物体密度测量仪,人机界面良好,成本低,易推广。     

Memristive effect with non-zero-crossing current-voltage hysteresis behavior based on Ag doped Lophatherum gracile Brongn

The memristive effect become a bio-electronics research focus with the development of sustainable systems and the application of multifunctional electronic devices. In this paper, the natural Lophatherum gracile Brongn (LGB) was employed as active layer to prepare Ag/LGB/fluorine-doped tin oxide (FTO) bio-memristor. Further, different doping ratios nano silver powders (Ag nanoparticle) were doped into LGB functional layers at 0 wt%, 0.2 wt%, 0.33 wt%, 1.0 wt%, 2.0 wt%, 10.0 wt% and 20.0 wt%. It is found that the capacitive-coupled memristive performance of the Ag/Ag-doped-LGB/FTO devices was markedly changed. Finally, it is confirmed that Ag ions transferring and Ag filament formation under the applied voltage are responsible for capacitive-coupled memristive behavior. This research has revealed the realization of capacitive-coupled memristive effect of bio-memristor, which opens a new way to achieve multifunctional performance for electronic device.     

Disposable Electrodes for Capacitive Immunosensor

Disposable electrodes were fabricated by coating chromium (5 nm) and gold (200 nm) on glass strips (5.0 mm×25.4 mm) and used in a label‐free immunosensor. Human serum albumin (HSA) and its antigen (anti‐HSA) were used as a model system. Electropolymerization of o‐phenylenediamine was used for the immobilization of anti‐HSA by covalent binding. A linear relationship was obtained in the range from 1.0×10^?14 to 1.0×10^?9 M with a limit of detection of 8.0×10^?15 M. Each modified electrode can be reused up to 30 times. The developed system was applied for human serum samples and compared to Albumin BCG method.     

A Contactless Impedance Probe for Simple and Rapid Determination of the Ratio of Liquids with Different Permittivities in Binary Mixtures

Simple contactless cells with planar or tubular electrodes have been designed for measurement of the permittivity of solutions. The cells, connected to an integrated circuit of astable multivibrator, respond primarily to the capacitance component of the cell impedance, the multivibrator frequency depends in a defined manner on the solution permittivity and is readily used as the analytical signal in determinations of the ratios of components in binary liquid mixtures; water solution of methanol, ethanol and dioxane have been tested. The response of the cell with planar electrodes satisfies well the simple theoretical model and both the cells provide results with a sufficient sensitivity, a low LOD value (units of %vol) and a good precision (around 1%rel). The cell simplicity, small dimensions, long‐term stability and the possibility of powering them from a battery make them suitable for hand‐held meters. As an example of application in practice, the content of ethanol was determined in the car fuel petrol.     

Label free capacitive immunosensor for detecting calpastatin — A meat tenderness biomarker

An immunological capacitive biosensor for calpastatin was developed, optimized and applied for the analysis of meat extract samples. Anti-calpastatin antibody was immobilized on a gold electrode modified with a self-assembled monolayer of mercaptoundecanoic acid and Protein A from Staphylococcus aureus, and the obtained immunosensor was inserted as the working electrode in an electrochemical cell of a flow injection system. The dynamic range of the sensor was 20 to 160 ng/mL calpastatin. The electrode could be regenerated and re-used for more than 7 days with minimal reduction in sensitivity. For the analysis of real samples, the target analyte was extracted from the Longissimus dorsi muscle from beef carcasses directly after slaughtering. The extract was analyzed both with the developed immunosensor and microtiter plate ELISA, and a good correlation was obtained. However the immunosensor offers advantages of speed, simplicity, sensitivity and possibility for miniaturization over conventional assays for calpastatin quantification.     

Application of a novel electrosynthesized polydopamine-imprinted film to the capacitive sensing of nicotine

The application of novel electrosynthesized polydopamine (PDA)-imprinted film as a recognition element for the capacitive sensing of nicotine is reported. The PDA-imprinted film was electropolymerized directly on the gold electrode surface in the presence of nicotine without an additional self-assembled thiol sublayer. The compact PDA film has various functional groups that aid the imprinting procedure. Furthermore, the film shows good capacitive response since it is insulating in nature and ultrathin. The sensor’s linear response range for nicotine was between 1–25 μmol L⁻¹, with a detection limit of 0.5 μmol L⁻¹. The proposed molecularly imprinted polymer capacitive (MIPC) sensor exhibited good selectivity for nicotine. The reproducibility and repeatability of the MIPC senor were all found to be satisfactory. The results from sample analysis confirmed the applicability of the MIPC sensor to quantitative analysis.     

Design of Low-Profile Millimeter-Wave Substrate Integrated Waveguide Power Divider/Combiner

A low-profile millimeter-wave substrate integrated waveguide (SIW) power divider/combiner is presented in this paper. The simplified model of this compact SIW power dividing/combining structure has been developed. Analysis based on equivalent circuits gives the design formula for perfect power dividing/combining. In order to verify the validity of the design method, a four-way SIW power divider/combiner circuit operating at Ka band is designed, fabricated and measured. Good agreement between simulated and measured results is found for the proposed passive power divider/combiner. Experiments on the four-way passive divider/combiner back-to-back design demonstrate a minimum overall insertion loss of 1.5 dB at 31.1 GHz, corresponding to a power-combining efficiency of 84%. The measured 10-dB return loss bandwidth is demonstrated to be 2.2 GHz, and its 0.5-dB bandwidth was 2 GHz.     

Electrochemical reactivity of atomic and molecular species under solid-state confinement

The nanoconfinement of electrochemically-active guest species in host solid state electrode materials provides opportunities to tune mass transport between the bulk electrolyte and inner surface of the electrode, enhance electron-transfer rates, and/or improve the stability and dispersion of active material. This review summarizes recent experimental and theoretical electrochemical studies of three types of nanoconfined guest species: (1) ion adsorption of electrolyte ions, (2) confined redox-active molecules, and (3) electrocatalytic reactions of confined ions/solvents and catalytic particles. The examples discussed in this review illustrate how the confinement of guest species within enclosed spaces with nanoscale dimensions – such as pores, pockets, channels, and interlayers – can lead to improved electrochemical performance.