REVIEW ON OPTIMIZATION OF ASTEROID CAPTURE ORBITS

小行星捕获对研究行星起源、地球生命来源、防御小行星撞击地球和开采行星矿产资源具有重要的意义。由于现有的推进器能力不足,小行星捕获任务中优化小行星捕获所需要的速度增量是任务成败的关键。本文分别从利用引力辅助轨道优化、连续小推力轨迹优化、小行星捕获任务轨道优化设计及小行星临时捕获等4 个方向介绍小行星捕获轨道优化方面国内外研究进展及现状。基于对上述研究现状的分析,尝试展望小行星捕获轨道优化研究的未来发展趋势。     

N-甲硝胺异构化和分解反应机理和动力学的理论研究

The complex potential energy surface and reaction mechanisms for the unimolecular isomerization and decomposition of methyl-nitramine (CH3NHNO2) were theoretically probed at the QCISD(T)/6-311+G*//B3LYP/6-311+G* level of theory. The results demonstrated that there are four low-lying energy channels: (i) the NN bond fission pathway; (ii) a sequence of isomerization reactions via CH3NN(OH)O; (IS2a); (iii) the HONO elimination pathway; (iv) the isomerization and the dissociation reactions via CH3NHONO (IS3). The rate constants of each initial step (rate-determining step) for these channels were calculated using the canonical transition state theory. The Arrhenius expressions of the channels over the temperature range 298-2000 K are k6(T)=1014:8e-46:0=RT , k7(T)=1013:7e-42:1=RT , k8(T)=1013:6e-51:8=RT and k9(T)=1015:6e-54:3=RT s-1, respectively. The calculated overall rate constants is 6.9￡10-4 at 543 K, which is in good agreement with the experimental data. Based on the analysis of the rate constants, the dominant pathway is the isomerization reaction to form CH3NN(OH)O at low temperatures, while the NN bond fission and the isomerization reaction to produce CH3NHONO are expected to be competitive with the isomerization reaction to form CH3NN(OH)O at high temperatures.     

甲硫醇和氢原子反应的从头算直接动力学

利用双水平直接动力学方法对反应CH3SH+H的微观机理和动力学性质进行了理论研究.对于此反应的三个反应通道,即—SH和—CH3基团上的两个氢提取通道及一个取代通道,在MP2/6-311+G(d,p)水平上优化得到了各稳定点的结构及振动频率,并在G3(MP2)水平上进行了单点能量计算以获得更精确的能量信息;在此基础上运用结合小曲率隧道效应校正的变分过渡态理论(CVT/SCT)计算了各反应通道在220-1000 K温度区间的速率常数.计算结果表明提取—SH基团上H的反应通道R1在整个反应温度区间都是主要通道,而随着温度的升高,低温下的次要反应通道——取代通道R3变得越来越重要,并且在高温下将成为一个竞争的反应通道;提取—CH3基团上H的反应通道(R2)由于具有较高的反应能垒,因而,其对总反应速率常数的贡献可以忽略.计算得到的总反应速率常数与已有的实验值符合得很好,进而我们预测了该反应在220-1000 K温度范围内速率常数的表达式为:k=5.00×10-18T2.39exp(-119.81/T),为将来的实验研究提供参考.     

气体混合物各组分化学势的Monte Carlo模拟

在则系综测试粒子Ｍｏｎｔｅ Ｃａｒｌｏ （ＧＣＭＣ）方法模拟常温下空气（以氮气为代表）及其污染物微量有机物（以苯为例）的混合物中各组分的化学势。模拟中,氮气和苯分子采用ＬＪ球型分子势能模型,采用Ｍｅｔｒｏｐｏｌｉｓ抽样及周期边界条件。通过模拟并拟合得到了３００．２Ｋ、苯的摩尔分数为０．０６２５,氮气及苯化学势与压力的关联式,以用于狭缝碳孔中该混合物体系的选择性吸附。     

旋涡与行进表面水波相互作用的实验研究

采用振动板式造波器在二维水槽中生成近似单色的行进表面水波，采用夹板式涡发生器生成稳定上浮的涡对，在Ｆｒｏｕｄｅ数约为０．５的条件下，得到了水下涡对与不同波长和振幅的行进表面水波相互作用时的干扰图象，以实验方法验证了理论分析和数值计算的结果，并为进一步研究旋涡与行进表面水波的相互作用提供了一种实验研究方法     

水下爆炸冲击荷载下混凝土重力坝的抗爆性能

在水下爆炸冲击荷载作用下,结构动力响应较之静态荷载和地震荷载作用下要复杂得多。通过大 量的数值模拟,探讨了混凝土重力坝在水下爆炸冲击荷载作用下,大坝高度、库前水位对大坝抗爆性能的影 响,为大坝抗爆性能评估和防护设计提供基础。数值计算中,构建了重力坝水下爆炸全耦合数值模型,并考虑 爆炸冲击作用下混凝土的高应变率效应。研究结果表明:对于混凝土重力坝,随着大坝高度的增加,大坝的抗 爆性能增强;库前水位对大坝的抗爆性能影响较大,通过降低库前水位可有效提高大坝的抗爆性能。     

水力劈裂问题的态型近场动力学建模

将态型近场动力学理论引入水力劈裂问题的模拟。构建了能反映岩土类材料准脆性断裂特征的态型近场动力学本构模型,并在物质点间相互作用力模型中加入等效水压力项,以实现在新生裂纹面上跟踪施加水压力。同时,考虑裂纹面间的接触,引入物质点间的短程排斥力作用,并设计了相应的接触算法。通过自编程序将模型和算法应用于含初始裂纹、不含初始裂纹以及含坝基软弱结构面的混凝土重力坝在高水头作用下的水力劈裂过程模拟,并与扩展有限元等模拟结果对比,验证了本文模型和算法的可行性和准确性。     

Comment on the paper: H.-E. Hwang, P. Han, Theoretical analysis for surface tilt and translation detection based on speckle photography in the Fresnel domain, Opt. Commun. 282 (2009) 351-354

In a recent paper [H.-E. Hwang, P. Han, Opt. Commun. 282 (2009) 351] a speckle based metrology system is proposed which it is claimed provides significant advantages over existing systems. In this paper, we show that the discussion presented in [H.-E. Hwang, P. Han, Opt. Commun. 282 (2009) 351] is deficient, and that several of the statements made are incorrect and/or misleading.     

Free (open) boundary condition: some experiences with viscous flow simulations

The free (or open) boundary condition (FBC, OBC) was proposed by Papanastasiou et al. (A new outflow boundary condition, International Journal for Numerical Methods in Fluids, 1992; 14:587–608) to handle truncated domains with synthetic boundaries where the outflow conditions are unknown. In the present work, implementation of the FBC has been tested in several benchmark problems of viscous flow in fluid mechanics. The FEM is used to provide numerical results for both cases of planar and axisymmetric domains under laminar, isothermal or non‐isothermal, steady‐state conditions, for Newtonian fluids. The effects of inertia, gravity, compressibility, pressure dependence of the viscosity, slip at the wall, and surface tension are all considered individually in the extrudate‐swell benchmark problem for a wide range of the relevant parameters. The present results extend previous ones regarding the applicability of the FBC and show cases where the FBC is inappropriate, namely in the extrudate‐swell problem with gravity or surface‐tension effects. Particular emphasis has been given to the pressure at the outflow, which is the most sensitive quantity of the computations. In all cases where FBC is appropriate, excellent agreement has been found in comparisons with results from very long domains. The formulation for Picard‐type iterations is given in some detail, and the differences with the Newton–Raphson formulation are highlighted regarding some computational aspects. Copyright © 2011 John Wiley & Sons, Ltd.     

重力匹配导航的影响模式分析

从重力场匹配导航的改进TERCOM算法入手,针对采样长度、采样间隔以及重力测量误差对匹配结果的影响进行了系统分析,并在此基础上利用海洋年度重力测量数据设计了准实时仿真试验,结果表明:(1)采样长度对匹配结果有重要的影响,采样长度与重力基准图的分辨率比值在10~20之间时,能够获得较好的匹配效果;(2)适当增加采样间隔可以在一定程度上提高匹配的整体精度,但增加了匹配失效的风险,实际应用中采样间隔以2~4 min为宜;(3)重力测量白噪声误差对匹配结果影响相对较大,过大的误差将不能得到有效匹配,水下重力测量误差最好能控制在2 mGal以内。