NaZnPO4催化碳酸二甲酯和丙氨酸“一锅法”合成N-羧基丙氨酸酸酐

以碳酸二甲酯（DMC）代替光气,一锅法合成α-氨基酸-N-羧酸酐（NCAs）是实现绿色制备多肽的重要途径.制备了酸碱协同催化剂NaZnPO₄,用该催化剂催化DMC和丙氨酸"一锅法"合成N-羧基丙氨酸酸酐（Ala-NCA）.在N,N-二甲基甲酰胺（DMF）溶剂中,150℃的反应条件反应8 h时,Ala-NCA的收率最高为46.84%,催化剂循环5次后收率仍达38.62%.NaZnPO₄中Zn²⁺和O-Na具有有效的酸碱协同催化作用,在反应过程中具有去质子化、精准酰基化和高效成环的作用.利用TG-MS-IR技术研究了催化剂表面上原料转化和中间体精准关环过程,并提出了可能的反应催化机理.     

Switchable Polymerization Triggered by Fast and Quantitative Insertion of Carbon Monoxide into Cobalt–Oxygen Bonds

A strategy that uses carbon monoxide (CO) as a molecular trigger to switch the polymerization mechanism of a cobalt Salen complex [salen=(R,R)‐N,N′‐bis(3,5‐di‐tert‐butylsalicylidene)‐1,2‐cyclohexanediamine] from ring‐opening copolymerization (ROCOP) of epoxides/anhydrides to organometallic mediated controlled radical polymerization (OMRP) of acrylates is described. The key phenomenon is a rapid and quantitative insertion of CO into the Co?O bond, allowing for in situ transformation of the ROCOP active species (Salen)Co^III‐OR into the OMRP photoinitiator (Salen)Co^III‐CO₂R. The proposed mechanism, which involves CO coordination to (Salen)Co^III‐OR and subsequent intramolecular rearrangement via migratory insertion has been rationalized by DFT calculations. Regulated by both CO and visible light, on‐demand sequence control can be achieved for the one‐pot synthesis of polyester‐b‐polyacrylate diblock copolymers (?<1.15).     

草酸钙结石形态的红外光谱分析

草酸钙结石主要是以一水草酸钙(COM)、二水草酸钙(COD)的形式存在。在解决缺少COD标样的难题后,将制备的COD样品与COM标样混合,然后采用红外光谱法对混合物进行分析研究,采用谱带比值法,确定了COD和COM在660和610 cm-1处与780和520 cm-1处的吸收度比值(R)与质量分数(w)的关系式,其线性回归方程分别为:R=11.95×10-3wCOD 0.873 61,r=0.983 63;R=4.74×10-3wCOD 0.886 52,r=0.992 44。同时为了减少压片、测定等因素引起的误差,采用零点交叉一阶导数法,测定在1 320 cm-1处吸收度一阶导数与COD质量分数(w)的关系式,其线性回归方程I=5.5×10-5w 9.2×10-5,r=0.996 60。线性良好。     

火焰原子吸收和发射光谱法测定盐湖卤水中的钙

在波长422.7nm下,用火焰原子吸收和发射光谱法测定了盐湖卤水中钙的含量,考察了酸度及共存离子对测定结果的影响,并对两种方法的优缺点进行了比较.结果表明,原子吸收光谱法受酸度及共存离子的影响较小,火焰发射光谱法测定钙的灵敏度比原子吸收光谱法高,两种方法的RSD均小于2%,加标回收率介于103.7%-107.2%.     

Synthesis of Polyanionic Cellulose Carbamates by Homogeneous Aminolysis in an Ionic Liquid/DMF Medium

Polyanionic cellulose carbamates were synthesized by rapid and efficient homogeneous aminolysis of cellulose carbonate half-esters in an ionic liquid/DMF medium. Cellulose bis-2,3-O-(3,5-dimethylphenyl carbamate), as a model compound, reacted with different chloroformates to cellulose carbonates. These intermediates were subjected to aminolysis, for which both the reactivity of different chloroformates towards C6-OH and the reactivity/suitability of the respective carbonate half-ester in the aminolysis were comprehensively studied. Phenyl chloroformate and 4-chlorophenyl chloroformate readily reacted with C6-OH of the model cellulose derivative, while 4-nitrophenyl chloroformate did not. The intermediate 4-chlorophenyl carbonate derivative with the highest DS (1.05) was then used to evaluate different aminolysis pathways, applying three different amines (propargyl amine, β-alanine, and taurine) as reactants. The latter two zwitterionic compounds are only sparingly soluble in pure DMF as the typical reaction medium for aminolysis; therefore, several alternative procedures were suggested, carefully evaluated, and critically compared. Solubility problems with β-alanine and taurine were overcome by the binary solvent system DMF/[EMIM]OAc (1:1, v/v), which was shown to be a promising medium for rapid and efficient homogeneous aminolysis and for the preparation of the corresponding cellulose carbamate derivatives or other compounds that are not accessible by conventional isocyanate chemistry. The zwitterionic cellulose carbamate derivatives presented in this work could be promising chiral cation exchangers for HPLC enantiomer separations.     

Cobalt Element Effect of Ternary Mesoporous Cerium Lanthanum Solid Solution for the Catalytic Conversion of Methanol and CO2 into Dimethyl Carbonate

A citric acid ligand assisted self-assembly method is used for the synthesis of ternary mesoporous cerium lanthanum solid solution doped with metal elements (Co, Zr, Mg). Their textural property was characterized by X-ray diffraction, transmission electron microscopy, N₂ adsorption-desorption, X-ray photoelectron spectroscopy and TPD techniques, and so on. The results of catalytic testing for synthesis of dimethyl carbonate (DMC) from CH₃OH and CO₂ indicated that the DMC yield reached 316 mmol/g on Ce-La-Co solid solution when the reaction temperature was 413 K and the reaction pressure was 8.0 MPa. It was found that Co had synergistic effect with La and Ce, doping of Co on the mesoporous Ce-La solid solution was helpful to increase the surface area of the catalyst, promote CO₂ adsorption and activation, and improve the redox performance of solid solution catalyst. The conversion of Co²⁺ to Co³⁺ resulted in the continuous redox cycle between Ce⁴⁺ and Ce³⁺, and the oxygen vacancy content of the catalyst was increased. Studies have shown that the catalytic performance of Ce-La-Co solid solution is positively correlated with oxygen vacancy content. On this basis, the reaction mechanism of DMC synthesis from CO₂ and CH₃OH on the catalyst was speculated.     

碳酸钴中钴碳氮的测定与结构表征研究

碳酸钴由于受生产工艺的制约,生产的产品组分复杂,且市售碳酸钴产品的命名也存在多样性.采用X射线荧光光谱仪、电感耦合等离子体发射光谱仪、元素分析仪、X射线多功能粉末衍射仪和红外吸收光谱仪对某碳酸钴产品的成分进行测定和结构表征.结果表明:该碳酸钴产品钴、碳、氮的含量分别为46.53％、8.31％ 和1.48％,相对标准偏差...     

硅钙合金中钙含量的测定

研究了用一氧化二氮-乙炔火焰原子吸收光谱法测定硅钙合金中钙,并对样品消化处理条件和干扰因素进行了综合考虑.该法灵敏度高、步骤简单,操作容易掌握,干扰少等特点.其相对标准偏差均小于1.0%(n=6).加标回收率均为97.0%-100.0%范围内,本法完全达到了仪器分析质量与质量控制要求.     

FAAS法测钙时磷酸根离子的干扰及消除研究

研究了用火焰原子吸收光谱法测钙时PO3- 4对钙的测定的干扰情况以及用有关方法消除PO3-4对钙干扰的效果.用La(NO3)3和EDTA单独消除PO3-4的干扰进行了实验研究,同时对有关问题作了讨论.对测定各种样品中的钙时消除PO3-4的干扰有一定的指导意义.     

碳酸钙共沉淀-火焰原子吸收光谱法测定卤水中的痕量钴

以碳酸钙共沉淀,用火焰原子吸收光谱法测定卤水中的痕量钴,对试剂的加入量富集时间,酸度等因素进行了实验,选择了最佳的共沉淀条件.方法已用于卤水分析,加标回收率:钴94.6%-98.7%.检出限:钴为1.89μg·L-1.本法测定手续简便、快速、结果满意.