钴铁水滑石基材料在电催化析氧中的应用

析氧反应(OER)是电催化裂解水、二次金属-空气电池和可再生燃料电池等绿色可持续能源储存和转化技术中的关键步骤,但其较高的势垒和迟滞的动力学过程限制了反应的效率。因此,设计开发高效、稳定的非贵金属催化剂是新能源领域面临的挑战之一。钴铁水滑石(CoFe LDH)材料具有独特的二维层状结构、丰富多变的化学组成、高分散的金属阳离子、优异的稳定性和成本低廉等优点,在OER反应中有广泛的应用前景。但不良的导电性和有限的活性位点阻碍了CoFe LDH的工业化应用。本文首先介绍了CoFe LDH的结构并阐述了其OER反应机理,接着总结了CoFe LDH的制备工艺,并详细综述了近年来提升其OER性能的改性策略：插层剥离、空位制造、材料复合、离子取代和衍生物等。最后讨论了水滑石材料现阶段存在的问题和未来在能源转化和利用领域的发展方向。     

二元ZnCo-LDH助催化剂对BiVO4光电化学性能的促进

钒酸铋(BiVO_4)是最有前景的将太阳能转化为氢能(STH)的光阳极材料之一,但其本身严重的电子-空穴复合严重影响了其实用性。本文中,我们报道了用一步电沉积法将高效的二元ZnCo-LDH助催化剂沉积在钒酸铋(BiVO_4)光阳极上,大大提升了钒酸铋(Bi VO4)的光吸收能力,并且加速了水氧化反应动力学,显著促进了光生空穴向半导体表面的转移,减轻了表面电荷复合。BiVO_4/ZnCo-LDH光阳极在1.23 V(vs RHE)偏压下,0.5 mol·L-1磷酸钾(KPi)电解液中的光电流密度达到2.85 mA·cm~(-2),是纯BiVO_4的2.59倍,且起始电位(Von)从930 m V下降到270 m V。BiVO_4/ZnCo-LDH复合光阳极表现出65%的高表面电荷分离效率(1.23 V(vs RHE)),而纯BiVO_4的仅为30%。     

钼酸根阴离子在增强聚苯胺包覆的镍钴层状氢氧化物的电容和析氧行为中的关键作用

理论容量大且过电位低的层状氢氧化物(LDHs)是极有前景的超级电容电池和析氧反应的电极材料;然而,体相LDHs的低电导率和活性位点不足增加了电极的内阻,降低了电极容量和产氧效率.本文采用两步法制备了聚苯胺包覆的MoO42?插层的镍钴层状双金属氢氧化物复合电极(M-LDH@PANI).随着LDH中MoO42?含量的增加,针状的LDH微球逐渐演化为具有较高比表面积的片状M-LDH微球,这为整个电极提供了更多的电化学位点.此外,非晶态的聚苯胺包覆提高了复合电极的电导率.在引入适量MoO42?插层离子时,M-LDH@PANI表现出显著强化的储能和催化性能.所获得的M-LDH@PANI-0.5在析氧反应中表现出优越的电催化活性(10 mA cm?2时的过电位为266 mV),作为超级电容电池电极则具有864.8 C g?1的高容量.采用M-LDH@PANI-0.5作为正极及以活性炭作为负极组装的超级电容电池在功率密度为8,300.0 W kg?1时能量密度为44.6 Wh kg?1,且具有优异的循环稳定性(10000次循环后保留83.9％的初始容量).本文为LDH基材料的阴离子插层改性增强材料性能的机理提供了一个非传统的解释.在上述研究基础上,采用射线衍射(XRD)、X射线光电子能谱(XPS)、扫描电子显微镜(SEM)、高分辨透射电镜(HRTEM)和比表面积测试(BET)等手段对样品进行了深入表征.XRD结果表明,MoO42?插层的LDH材料的层间晶面(003)的峰随着MoO42?含量的增加而逐渐消失,这是由于晶面间距越大越容易受到晶粒细化的影响,间距大的晶格更容易受到破坏,导致晶格的展宽和弱化,从而间接证明MoO42?的成功插层.SEM、HRTEM和BET测试结果表明,MoO42?的含量对材料的形貌和比表面积具有重大影响.利用XPS对样品的价态进行了研究,发现随着MoO42?含量的增加,Co和Ni的价态没有明显变化.电化学测试结果表明,电极的储能和催化性能随MoO42?含量的增加而先增加后减小.利用理论计算分析了MoO42?在LDH中的插层行为,发现少量的MoO42?有利于扩大LDH的层间间距,而过量的MoO42?则会与LDH的H原子结合,从而与电解液中的OH?竞争,导致复合电极的电化学性能下降.此外,MoO42?插层的片状微球能有效调节材料的去质子化能,大大加速电极表面的氧化还原反应.因此,MoO42?插层能够显著强化LDH基材料的超级电容电池电极和OER催化剂电化学性能.     

温和条件下元素对M~(2+)/Fe~(2+)/Fe~(3+)-LDHs转化成尖晶石铁氧体过程的影响(英文)

研究了二价金属离子在温和条件下(低于100℃,暴露于空气中)从水滑石M2+/Fe2+/Fe3+-LDHs(M=Co,Ni,Mn,Zn)转化成尖晶石铁氧体的过程中所起的作用。结果表明,该转化过程不仅与晶化温度有关,还与M2+在元素周期表中所处的位置有关。当这些二价金属离子处于同一周期并且相邻较近时,M2+的半径越大,水滑石微晶向尖晶石铁氧体的转化就越容易。此外,Fe2+在转化过程中起着至关重要的作用,如果没有Fe2+的参与,在此条件下的转化将无法进行。     

New Layered Double Hydroxide, Zn–Ti LDH : Preparation and Intercalation Reactions

The layered double hydroxide (LDH) well known for its abilityto intercalate anionic compounds has been prepared conventionallyonly with bivalent and trivalent cations. In this study, Zn–Ti LDH consisting of bivalent and tetravalent cations was prepared, andreacted with organic monocarboxylic, dicarboxylic and aromatic acidsat high or room temperature. XRD patterns of the prepared LDH(Zn–Ti-CO₃) showed that interlayer spacing of the LDH was 0.67 nm. The value was small compared to the usual LDH (Zn–Al–CO₃)of 0.76 nm in the case of carbonate anion as the guest. Also, DTA,TG and DTG analysis indicated that the electrostatic force betweenthe layers and carbonate anions increased where the carbonate anionsin Zn–Ti LDH decomposed at 255 °C while those inZn–Al–CO₃ decomposed at 230–240 °C.     

层状复合氢氧化物对乙酰苯甲酸的负载与体外释放

共沉淀-微波晶化法合成层状复合氢氧化物(LDH)后, 用不同方式将乙酰苯甲酸(ASP)组装到LDH层间制成载药体LDH-ASP, 通过对合成及药物释放前后的液相分析与固相表征数据研究了LDH对ASP的负载及载药体LDH-ASP在磷酸盐介质的溶释现象. 结果表明: LDH层间通道是负载、贮存及控制药物释放的微观基础; 载体选择、药物配比、反应能量供给方式及搅拌强度是决定并影响LDH-ASP载药效率的基本因素, LDH-ASP结构参数可以反映药物负载情况、并与其释放性能明确相关; LDH对ASP的负载与释放均致晶胞参数改变、结晶度下降; 载药体与前体的晶态属性、热力学行为及表面特性相似, 而释放药物后固相的晶态性征减弱、无定形性增强、通道吸附活性降低, 有利于使命后载体在体内降解消除.     

Synthesis of Cu–Cr diketo,sublimable, eutectic composite complex,rod crystals from LDH as suitable MOCVD precursor of CuCr2O4 catalysts upon ceramic preforms for N2O decomposition

Metal-acteylacetonates are important sublimable metal-organic precursors for metal-oxide thin film formation over solid preforms by MOCVD (Metal Organic Chemical Vapour Deposition) technique. Mixed-metal-acetylacetonates (MMAA) are suitable starting materials for mixed metal nano-oxidic thin film formation through such facile routes. Layered Double Hydroxides (LDH) of suitable metal ion combination can perform as appropriate starting base for neutralisation by enol form of 2,4-pentanedione or acteylacetonate tautomer ligands to obtain such MMAA. In this paper synthesis of composite crystals of Cu(II)/Cr(III) acetylacetonates (CCAA) is reported by the reaction of Cu–Cr-LDH with acetylacetone. The products were characterized by various different techniques. The surface area and pore volume analysis of the crystals showed the formation of nanopores in the compound. TEM analysis confirmed that the inner core of the nanoporous crystals of Cu(acac)₂ was covered by coating of poorly crystallised Cr(acac)₃ and they together form the composite crystals, and they together form the composite crystals. Due to eutectic mixture formation the melting point of CCAA lies in between the melting points of individual components Cu(acac)₂ and Cr(acac)₃ and shows sublimability, a property important for the formation of MOCVD films. The composite was used for CuCr₂O₄ spinel mixed oxide films formation over solid ceramic honeycomb monolithic substrates. Application prospects of the route in the field of catalysis is high as it can directly combine the benefits of mixed metal oxide catalysis and structured supports without the involvement of a third component. In this work the performance of such a catalytic device has been tested for low temperature decomposition of high Global Warming Potential (GWP) gas N₂O to N₂ and O₂.     

Mg-LDH Nanoclays Intercalated Fennel and Green Tea Active Ingredient: Field and Laboratory Evaluation of Insecticidal Activities against Culex pipiens and Their Non-Target Organisms

(1) Background: Mosquito control with essential oils is a growing demand. This work evaluated the novel larvicidal and adulticidal activity of fennel and green tea oils and their Layered double hydroxides (LDHs) nanohybrid against Culex pipiens (Cx. pipiens) in both laboratory and field conditions and evaluated their effect against non-target organisms; (2) Methods: Two types of nanoclays, MgAl-LDH and NiAl-LDH were synthesized and characterized using PXRD, TEM and SEM, whereas their elemental analysis was accomplished by SEM-EDX; (3) Results: Mg and Ni LDHs were synthesized by the co-precipitation method. The adsorption and desorption of active ingredients were conducted using LC MS/MS, with reference to the SEM-EXD analysis. The desorption process of MgAl-LDH intercalated green tea oil was conducted using ethanol, and reveled significant peaks related to polyphenols and flavonoids like Vanillin, Catechin, Daidzein, Ellagic acid, Naringenin, Myricetin and Syringic acid with concentrations of 0.76, 0.73, 0.67, 0.59, 0.52, 0.44 and 0.42 μg/g, respectively. The larvicidal LC₅₀ values of fennel oil, Mg-LDH-F, and Ni-LDH-F were 843.88, 451.95, 550.12 ppm, respectively, whereas the corresponding values of green tea were 938.93, 530.46, and 769.94 ppm. The larval reduction percentage of fennel oil and Mg-LDH-F reached 90.1 and 96.2%, 24 h PT and their persistence reached five and seven days PT, respectively. The reduction percentage of green tea oil and Mg-LDH-GT reached 88.00 and 92.01%, 24 h PT and their persistence reached five and six days PT, respectively. Against adults, Mg-LDH-GT and Ni-LDH-GT were less effective than green tea oil as their LC₉₅ values were 5.45, 25.90, and 35.39%, respectively. The reduction in adult density PT with fennel oil, Mg-LDH-F, green tea oil, and Mg-LDH-GT reached 83.1, 100, 77.0, and 99.0%, respectively, 24 h PT and were effective for three days. Mg-LDH-GT and Mg-LDH-F increased the predation Cybister tripunctatus (71% and 69%), respectively; (4) Conclusions: For the first time, Mg-LDH-GT and Mg-LDH-F was the best system loaded with relatively good desorption release to its active ingredients and significantly affected Cx. pipiens larvae and adults in both laboratory and field circumstances, and it could be included in mosquito control.     

层状双金属氢氧化物及其复合材料加速电解水制氢的研究进展

随着经济社会的不断发展和能源的不断消耗,开发清洁能源已引起研究者们的广泛关注。层状双金属氢氧化物(LDH)具有典型的层状结构、制备难度低、组成易调节等优点,在电催化分解水方面表现出可与贵金属催化剂相媲美的性能。目前LDH催化剂仍然存在稳定性不足、活性位点辨别不明、电催化反应机理模糊不清等科学问题亟待解决。本文首先介绍了LDH材料的性质和制备方法,重点从元素和化合物对LDH材料结构和性能的调控、取代阳极OER以及海水氧化三个方面综述了LDH材料在电催化制氢方面的研究进展,阐述了LDH复合材料的形貌、界面作用及化合物之间的协同作用。最后对LDH材料更深层次的研究方向作出展望。     

伊犁河、额尔齐斯河两水域中东方欧鳊的几个生化指标的比较研究

东方欧鳊(Abramis brama orientalis Berg)源于苏联咸海,我区伊犁河和额尔齐斯河均有分布,由于地理隔离的结果,两水系的东方真鳊已在形态学上出现了某些差异,为进一步探明二者间的亲缘关系,我们进行了鱼肉蛋白质含量、鱼肉氨基酸组成,LDH同工酶、血清蛋白等生化指标的比较研究,结果表明除了氨基酸组成及含量基本未发生变化外,其余三项指标均有显著不同,即说明两水系的东方欧鳊已出现种群间差异,至于是否已分化成两个不同的亚种,尚待进一步研究.