Ultra high performance liquid chromatography-quadrupole-time of flight analysis for the identification and the determination of resveratrol and its metabolites in mouse plasma

Resveratrol is a polyphenol that has numerous interesting biological properties, but, per os, it is quickly metabolized. Some of its metabolites are more concentrated than resveratrol, may have greater biological activities, and may act as a kind of store for resveratrol. Thus, to understand the biological impact of resveratrol on a physiological system, it is crucial to simultaneously analyze resveratrol and its metabolites in plasma. This study presents an analytical method based on UHPLC-Q-TOF mass spectrometry for the quantification of resveratrol and of its most common hydrophilic metabolites. The use of ¹³C- and D-labeled standards specific to each molecule led to a linear calibration curve on a larger concentration range than described previously. The use of high resolution mass spectrometry in the full scan mode enabled simultaneous identification and quantification of some hydrophilic metabolites not previously described in mice. In addition, UHPLC separation, allowing run times lower than 10 min, can be used in studies that requiring analysis of many samples.     

Mechanism for nucleation and growth of electrochemical deposition of palladium(II) on a platinum electrode in hydrochloric acid solution

Palladium(II)and chloride ions tend to form complexes in aqueous solution.Both theoretical and experimental(by UV spectrum)results indicate that there are four complexes formed in aqueous solution containing 3 mol/L hydrochloric acid and 20mmol/L PdCl2.This work evaluates the kinetics of electrochemical deposition of palladium on a Platinum electrode.For this purpose,palladium electrodeposition was investigated by means of cyclic voltammetry(CV),potentiostatic current-time transients(CTTs)and Tafel curve.By CTTs curves,the regions corresponding to the charge transfer control,mixed control and diffusion control were identified.In the diffusion control region,palladium electrodeposition mechanism was characterized as progressive nucleation with three-dimensional(3D)growth under diffusion control;as for the mixed control region,an adsorption(IAds),ion transfer(IIT),and nucleation and growth(ING)model were proposed to analyze the current-time transients quantitatively,which could separate the IAds,IIT and ING perfectly.     

耗散系统中原子和场的熵交换与纠缠

研究耗散腔中, 二能级原子与单模辐射场在相互作用过程中熵关联的情况. 结果表明：原子与场之间存在熵交换现象, 更重要的是证明了它们之间的熵交换需要满足一定的条件. 同时也计算了原子与场之间的纠缠, 发现两子系统间熵交换与纠缠的关系.     

Convergence properties and practical estimation of the probability of rank reversal in pairwise comparisons for multi-criteria decision making problems

In this paper, we address the impact of uncertainty introduced when the experts complete pairwise comparison matrices, in the context of multi-criteria decision making. We first discuss how uncertainty can be quantified and modeled and then show how the probability of rank reversal scales with the number of experts. We consider the impact of various aspects which may affect the estimation of probability of rank reversal in the context of pairwise comparisons, such as the uncertainty level, alternative preference scales and different weight estimation methods. We also consider the case where the comparisons are carried out in a fuzzy manner. It is shown that in most circumstances, augmenting the size of the expert group beyond 15 produces a small change in the probability of rank reversal. We next address the issue of how this probability can be estimated in practice, from information gathered simply from the comparison matrices of a single expert group. We propose and validate a scheme which yields an estimate for the probability of rank reversal and test the applicability of this scheme under various conditions. The framework discussed in the paper can allow decision makers to correctly choose the number of experts participating in a pairwise comparison and obtain an estimate of the credibility of the outcome.     

Quantum communication for satellite-to-ground networks with partially entangled states

To realize practical wide-area quantum communication,a satellite-to-ground network with partially entangled states is developed in this paper.For efficiency and security reasons,the existing method of quantum communication in distributed wireless quantum networks with partially entangled states cannot be applied directly to the proposed quantum network.Based on this point,an efficient and secure quantum communication scheme with partially entangled states is presented.In our scheme,the source node performs teleportation only after an end-to-end entangled state has been established by entanglement swapping with partially entangled states.Thus,the security of quantum communication is guaranteed.The destination node recovers the transmitted quantum bit with the help of an auxiliary quantum bit and specially defined unitary matrices.Detailed calculations and simulation analyses show that the probability of successfully transferring a quantum bit in the presented scheme is high.In addition,the auxiliary quantum bit provides a heralded mechanism for successful communication.Based on the critical components that are presented in this article an efficient,secure,and practical wide-area quantum communication can be achieved.     

Biaxial tensile behavior and strength of architectural fabric membranes

The utilization of composite fabric membrane materials for large-span membrane structures has attracted considerable attention in recent decades due to enhanced material properties. Biaxial mechanical properties with respect to real engineering applications are essential and indispensable in comparison with uniaxial ones. This study focuses on true biaxial characteristics of a typical polyvinylidene fluoride (PVDF)-coated polyester membrane material in terms of stress-strain characteristics and breaking criteria.The true stress-strain curves obtained from an experimental study, i.e. seven loading ratios on the basis of symmetry and typical conditions, are investigated with digital image correlation method. The interpolation of these curves in combination of least square method achieves a three-dimensional strain surface as a function of warp and weft strains, which is useful to assess reasonable structural behavior. A new breaking criteria intended for architectural fabric membrane is proposed in analogy to Tsai-Hill, Yeh-Stratton and Norris failure criteria. The basic constants in the criteria are determined using experimental results. A comparative analysis between available uniaxial and biaxial criteria shows that the new criteria can cover all criteria due to the fact that biaxial mechanical properties are larger than uniaxial ones. Furthermore, a similar but glued specimen is employed to compare welded specimens. It is obtained that observations, values and curve tendency are similar, demonstrating the suitability of using new specimens to identify true biaxial properties.     

超高分子量聚乙烯烧结制品的链缠结调控及其对性能影响

利用新的单中心Ziegler-Natta(Z-N)催化剂,通过干预分子链的生长与聚集行为,可获得低缠结的超高分子量聚乙烯(UHMWPE)初生树脂.本研究利用这类低缠结UHMWPE,通过设置不同的烧结温度(Ts)来改变熔体缠结状态,并探讨了链缠结程度对烧结制品结构与性能的影响.实验结果表明TS=220℃下,UHMWPE样品发生显著的复缠,造成高缠结度;而Ts=170℃下,初始低缠结状态能够得以充分保留,从而获得了缠结度具有明显差别的不同样品.示差扫描量热法(DSC)测试表明,在Ts=170℃下,低缠结度有利于在随后等温及冷却结晶过程中生成高熔点(最高达141℃)晶体与高的结晶度(最高达65%).力学测试表明低缠结度制品的综合力学性能显著提升,其中屈服强度提高72%,拉伸断裂强度提升139%,弹性模量提升162%以及断裂伸长率提升36%,实现了同时增强增韧.这就提供了一种从调节链缠结温度实现UHMWPE烧结制品高性能化的新思路.     

基于四波混频过程和线性分束器产生四组份纠缠

多组份纠缠是量子信息处理的重要资源,它的产生通常涉及到许多复杂的线性和非线性过程.本文从理论上提出了一种利用两个独立的四波混频过程和线性分束器产生真正的四组份纠缠的方案,其中,线性分束器的作用是将两个独立的四波混频过程联系起来.首先应用部分转置正定判据研究了强度增益对四组份纠缠的影响,结果表明,在整个增益区域内都存在真正的四组份纠缠,并且随着强度增益的增加,纠缠也在增强.然后研究了线性分束器的透射率对四组份纠缠的影响,发现只要线性分束器的透射率不为0或1,该系统也可以产生真正的四组份纠缠.最后,通过研究该系统可能存在的三组份纠缠和两组份纠缠来揭示该系统的纠缠结构.本文理论结果为实验上利用原子系综四波混频过程产生真正的四组份纠缠提供了可靠的方案.     

复合材料失效判据有效性验证方法研究

为系统地验证复合材料失效判据计算精度和有效性范围,给出了4种材料体系、6种铺层形式的层合板在单轴、双轴载荷下的失效试验数据,用以评估复合材料失效判据在单向层合板失效包线、多向层合板初始失效包线、多向层合板最终失效包线、层合板变形及层合板的破坏特性等五个方面的预测能力。并根据验证方法和有效性评估策略对失效判据计算精度进行量化考核,给出了失效判据在五个层面上的计算精度。     

Quantum Thermalization and Vanishing Thermal Entanglement in the Open Jaynes–Cummings Model

The quantum thermalization of the Jaynes–Cummings (JC) model in both equilibrium and non-equilibrium open-system cases is studied, in which the two subsystems, a two-level system and a single-mode bosonic field, are in contact with either two individual heat baths or a common heat bath. It is found that in the individual heat-bath case, the JC model can only be thermalized when either the two heat baths have the same temperature or the coupling of the JC system to one of the two baths is turned off. In the common heat-bath case, the JC system can be thermalized irrespective of the bath temperature and the system–bath coupling strengths. The thermal entanglement in this system is also studied. A counterintuitive phenomenon of vanishing thermal entanglement in the JC system is found and proved.