Reduction in etching time for fission tracks in diallyl phthalate resin

Diallyl phthalate (DAP) resin plates were irradiated with fission fragments, and then etched in a conventional aqueous solution of KOH or a PEW solution containing ethanol, water and KOH. Etched tracks were observed and counted by using an optical microscope. The PEW solution made the fission tracks etch-pits clearer in an incomparably shorter etching time. The large and round etch-pits developed on a smooth surface were convenient for optical automatic counting. These etching characteristics of DAP in a PEW solution are suitable for quantitative analysis of fissionable materials and neutron dosimetry.     

Using the OSL single-aliquot regenerative-dose protocol with quartz extracted from building materials in retrospective dosimetry

We report on the application of the single-aliquot regenerative-dose (SAR) protocol to the optically stimulated luminescence signal from quartz extracted from fired bricks and unfired mortar in retrospective dosimetry. The samples came from a radioactive materials storage facility, with ambient dose rates of about 0.1 mGy/h. A detailed dose-depth profile was analysed from one brick, and compared with dose records from area TL dosemeters. Small-aliquot dose-distributions were analysed from the mortar samples; one associated with the exposed brick, and one from a remote site exposed only to background radiation. We conclude that unfired materials have considerable potential in retrospective dosimetry.     

Fast Neutron Sensitivity of TL Detectors using Proton Radiator Techniques

TL materials have a small intrinsic sensitivity for fast neutrons. In order to increase this sensitivity one uses hydrogen containing radiators giving recoil protons as a result of the neutron interaction. By combining the proton radiator technique with the use of TL detectors having various glow peaks with a different response to recoil protons an additional sensitivity yield can be reached. The paper deals with the calculation procedure for the (radiator) sensitivity component. For the LiF phosphors TLD-600 and TLD-700 calculated and experimentally determined fast neutron sensitivities are presented for the glow peaks V and VII. The results show that for accident dosimetry a sufficient agreement of the dedector response with the dose-to-fluence conversion factors is obtained.     

Luminescence studies on rγ-ray-irradiated Dy3+-activated sodium chloride phosphor for radiation dosimetry

The lyoluminescence (LL), thermoluminescence and mechanoluminescence (ML) of a γ -ray-irradiated powder of NaCl:Dy (0.05–0.5 mol%) phosphor are reported in this paper. The nature of intensity variation of the respective luminescence spectra with different γ -ray doses and with different concentrations of Dy³⁺ doped in NaCl are found to be similar. The LL and ML intensities differed from each other, but their nature is found to be similar in a sublinear form up to a high dose (5.0 kGy) of γ -rays. Thus, the prepared phosphor may be useful for accidental radiation dosimetry up to a high dose (5.0 kGy) of γ -rays using the LL and ML techniques.     

Radiation induced polymerization of Vinylbenzoate–II. Study of the molecular weights of polymers

Abstract

In this study, the molecular weights of the polymer from vinyl benzoate has been reported for different dose rates and different temperatures. The mol.wt. remains around 4000. With increasing dose, the molecular weight increases to about 14,000. The degrees of polymerization and the kinetic chain lengths calculated from the experimentally determined G _R values have been compared which show that the kinetic chain length is larger than the D ^? Pn.

From a plot of the (D ^? Pn)^?1 vs. R _p , an intercept is obtained which is equal to 3.25 × 10^?2 which is higher than obtained in conventional polymerization. By examining the effect of temperature on mol.wt., the dependence of R _p on dose rate and the absence of induction period it has been concluded that chain transfer occurs to impurities that are generated during radiolysis.     

Analysis of phantom centering positioning on image noise and radiation dose in axial scan type of brain CT

ABSTRACT

This study examined the dose and image quality according to the position change of a human phantom in a CT scan. This study used an MDCT 128 Slice CT Scanner instrument. An axial scan was performed with a 16 cm CTDI phantom of a human phantom, and the dose was measured using a pencil chamber meter. The phantom was scanned 10 cm above and below the isocenter and 15 cm above the right and left. The position of the phantom is indicated by C-0 in the isocenter position, S-10 in the upper 10 cm, I-10 in the lower 10 cm, R-15 in the right 15 cm, and L-15 in the left 15 cm. The test was performed 30 times using the brain CT protocol to calculate the dose and the dose width product (DWP). The acquired images were analyzed using the ImageJ program. Statistical analysis was performed using SPSS with one-way ANOVA (p < .05). The mean DWP values of the CT scanner were C-0 31.97 mGy·cm, S-10 24.52 mGy·cm, I-10 24.28 mGy· cm, R-15 17.95 mGy·cm, and L15 17.6 mGy·cm. Compared to the isocenter (C-0), the DLP values measured at each site were 23.3% for S-10, 24% for I-10, 43.8% for R-15, and 44.9% for L15. A significant difference in the one-way ANOVA statistical process was observed (p>0.05). C-0 was measured to be 7.42 HU, S-10 7.87 HU, I-10 8.4 HU, R-15 117 HU, and L-15 13.6 HU for evaluating the image quality. Compared to C-0, S-10 was 5.39%, I-10 was 13.2%, R-15 was 57.6%, and L-15 was 83.2%. The PSNR for S-10, I-10, R-15, and L-15 was 17.37, 17.5, 16.62, and 16.37 dB, respectively. A good quality image can be obtained by positioning the subject precisely in the isocenter in the axial scan, if possible, because the irradiated dose to the subject is low, which can lead to an increase in noise in image reconstruction.     

Studies on Synthesis and Characterization of Charge Transfer Polymerization of Styrene and Alkyl Methacrylates

Abstract

Copolymers involving styrene and homologues of alkyl methacrylates (viz., methyl, ethyl, and butyl methacrylates) were synthesized at 60°C by employing a mixture of n‐butylamine and carbontetrachloride as charge transfer (CT) initiators in dimethyl sulphoxide medium. The CT complex was characterized by UV spectroscopy while the respective copolymers were characterized by employing infrared (IR) and ¹H NMR spectroscopy. The copolymer compositions were determined by using ¹H NMR spectroscopy and the reactivity ratios were computed by Fineman–Ross (F–R) and Kelen–Tudos (K–T) methods. The reactivity ratios of Sty‐MMA and Sty‐EMA copolymers indicate that higher level of styrene is incorporated in the copolymer. On the other hand the Sty‐BMA system exhibits different behavior. The higher value of r ₂ is obtained denoting that BMA is more active than styrene and hence, more BMA is present in the copolymer chain. In Sty‐MMA and Sty‐BMA systems, the product of r ₁ and r ₂ is greater than 1, representing the formation of high degree of random copolymers. However, in the case of Sty‐EMA, the product of r ₁ and r ₂ is less than 1 indicating the formation of alternating copolymer.     

Biodosimetry versus physical dosimetry for emergency dose assessment following large-scale radiological exposures

Existing data on intercomparisons involving biodosimetry or physical dosimetry methods are analyzed and the results interpreted regarding their efficacy in triage in emergency dosimetry following mass casualty radiological events. The biodosimetry technique examined is dicentric chromosome aberrations (DCA). The physical dosimetry techniques include electron paramagnetic resonance (EPR) of biological material (teeth) and physical material (smartphone screen glass), and optically stimulated luminescence (OSL) of electronic components (surface mount resistors) from mobile phones. Issues relating to calibration and interpretation of the data are discussed. An important conclusion of the analysis is that more research is critically needed to interpret the efficacy of the various methods. Included in this needed research are intercomparisons of the various methods in controlled experiments and the need to harmonize protocols.     

Cloning, Expression and Purification of Wheat Acetyl-CoA Carboxylases CT Domain in E. coil

The entire gene of carboxyltransferase（CT） domain of acetyl-CoA carboxylase（ACCase） from Chinese Spring wheat（CSW） plastid was cloned firstly, and the 2.3 kb gene was inserted into PET28a^＋ vector and expressed in E. coil in a soluble state. The （His）6 fusion protein was identified by SDS-PAGE and Western blot. The recombinant protein was purified by affinity chromatography, and the calculated molecular mass（Mr） was 88000. The results of the sequence analysis indicate that the cloned gene（GeneBank accession No. EU124675） was a supplement and revision of the reported ACCase CT partial cDNA from Chinese Spring wheat plastid. The recombinant protein will be significant for us to investigate the recognizing mechanism between ACCase and herbicides, and further to screen new herbicides.     

探测器偏置重建算法在工业CT检测中的应用

工业CT检测对象的大小是不固定的,最大限度地利用已有探测器的成像面积非常重要。采用探测器偏置来获得更大的扫描视野,并推导相应的重建算法。该算法首先使用Parker类型函数对采集到的投影数据中的冗余部分进行加权,然后采用扇束滤波反投影重建算法重建得到断层图像。在实验中使用实际工业CT系统分别采集钢制线对块与铝合金变速器外壳的投影数据进行重建算法的验证,重建结果证明了使用的探测器偏置重建算法的正确性与有效性,且空间分辨率和标准扫描的重建结果保持一致,这个方法可以在工业CT成像上有效使用。