Threonine-FX dosimeter for food irradiation

A detailed study for the spectrophotometric readout method for L-threonine powder, [CH₃CH(OH)CH(NH₂)COOH], was done. In this method, 400 mg unirradiated/irradiated L-threonine powder was dissolved in 10 ml of a solution which contains 3×10⁻⁴ mol dm⁻³ ferrous ammonium sulphate and 1.7×10⁻⁴ mol dm⁻³ xylenol orange (XO) in aerated aqueous 0.17 mol dm⁻³ sulphuric acid (FX). The peroxy radicals produced from irradiated threonine oxidize ferrous ions and XO forms a complex with ferric ions as well as controls the chain length of ferrous ion oxidation. The plot of absorbance at 556 nm against dose is linear in the dose range 20–400 Gy and doses down to about 1 Gy can be measured using 10-cm path cells. Response of the dosimeter is independent of irradiation temperature above 20. A dose of 50 Gy–10 kGy can be measured dissolving 50 mg threonine powder in 10 ml of a solution which contains 3×10⁻⁴ mol dm⁻³ ferrous ammonium sulphate and 1.3×10⁻⁴ mol dm⁻³ XO in aerated aqueous 0.06 mol dm⁻³ sulphuric acid (FX). The plot of absorbance at 552 nm against dose is non-linear. However dosimeter shows linear dose response up to 1000 Gy. Irradiated threonine powder is stable for about 3 months. The reproducibility of the method is better than ±2%. This dosimeter is very useful as transfer dosimeter for food irradiation programme.     

Energies of Charge Transfer for the Supramolecular Complexes of [60]- and [70]Fullerenes with a Series of meso-Tetraphenylporphyrins in the Solution State

Supramolecular complexes of [60]- and [70]fullerenes with various meso-tetraphenylporphyrins in toluene solutions have been studied by electronic absorption spectroscopy. Charge transfer (CT) absorption bands are observed in the visible region. Vertical ionization potentials (I _D ^V) of the meso-tetraphenylporphyrins are reported from a study of EDA interaction of these porphyrins with a number of electron acceptors like o-chloranil, p-chloranil, 2,3-dichloro-5,6-dicyanobenzoquinone (DDQ) and vitamin K. The dependence of the CT transition energy on the donor ionization potential has been utilized to estimate the vertical electron affinities (E _A ^V) of [60]- and [70]fullerenes in solution. The value of E _A ^V for [60]fullerene is found to be 0.10 eV lower in magnitude than that of [70]fullerene. We have extracted degrees of CT, and oscillator and transition dipole strengths of the fullerenes/meso-tetraphenylporphyrins complexes. The experimental results show that the CT complexes studied here have a neutral character in their ground states. Electronic coupling elements have been determined for fullerene/meso-tetraphenylporphyrin complexes. Values of the solvent reorganization energy indicate that the electron transfer process takes place at a faster rate in the case of [70]fullerene/meso-tetraphenylporphyrin complexes.     

高能工业CT用新型X射线源焦斑测量

 为了获得较高的空间分辩率，设计了一种新型小束斑驻波电子直线加速器，该加速器取消了加速腔中的鼻锥结构，而在耦合腔中设置鼻锥结构。用狭缝法代替小孔法测得X射线源的焦斑尺寸为1.4mm。讨论了射线源焦点对成像质量的影响，分析了在高能条件下小孔法不适合用于焦点测量的物理原因，用4种测量方法测量了该高能X射线源的参数，测得该系统的成像极限分辩率为2.5 lp/mm，最后对实验结果进行了分析。     

Experimental study and numerical modeling of brittle fracture of carbonate rock under uniaxial compression

The brittle carbonate rock taken from the Tarim Oilfield is tested in laboratory under uniaxial compression. The acoustic emission (AE) is used to monitor the microcracking activity in rock during the experiment. Moreover, the 3D tomograms of carbonate rock after uniaxial compression are obtained by using CT imaging technology, which indicates that microcracks mutually interconnect and eventually form macroscopic fractures after failure. The PFC2D is used to model the behavior of brittle rock including microcracks propagation. The stress–strain curve and cracks distribution in rock model are obtained from the PFC simulation. The numerical results agree with the experimental test well.     

Studies of Tertiary Amine Oxides. Part1 15. Carbon - 13 nuclear magnetic resonance spectra of some N-(4-substituted phenyl) piperidine,the corresponding N-oxides,and their thermal-rearrangement product

The carbon-13 chemical shifts of seven N-(4-substituted phenyl) piperidine; the corresponding N-oxides, and their thermal rearrangement products were analyzed and assigned. The N-oxidation effect on the carbon-13 chemical shift is discussed, a correlation of N-oxidation effect with substituent constant (σ_p, σ_m, σ_I and σ_R) has been studied; dual substituent-parameter equation produce better correlation.     

Polymer complexes. LXXVI. Synthesis,characterization, CT‐DNA binding,molecular docking and thermal studies of sulfoxine polymer complexes

Novel polymer complexes of 8‐hydroxyquinoline‐5‐sulfonic acid hydrate ( H ₂ L ) with Cu²⁺, Co²⁺ and Ni²⁺ chloride were prepared and characterized. Microanalysis, magnetic susceptibility, IR spectra, electron spin resonance, mass spectra, X‐ray, molar conductance, thermal, and UV–Vis spectra studies have been used to confirm the structure of the prepared polymer complexes. The molecular and electronic structures of the hydrogen bond conformers for ligand ( H ₂ L ) were optimized theoretically and the quantum chemical parameters were calculated. On the basis of elemental and IR data, the chemical structure of metal chelates commensurate that the tri‐dentate (H₂L) coordinate to metal chlorides through oxygen atom of phenolic OH and oxygen atom of SO₃‐H group by replacing H atoms and nitrogen of the quinoline ring. The magnetic studies suggested the octahedral geometrical structure for all produced polymer complexes with general formula {[ML (OH₂)₃] .xH₂O}_n (M = Cu²⁺, x = 1.; Co²⁺, x = 2 and Ni²⁺, x = 2) in molar ratio (1:1). Coats–Redfern and Horowitz–Metzger methods have been used for calculating the activation thermodynamic parameters of the thermal decomposition for H ₂ L and its polymer complexes. The interaction between H ₂ L and its transition metal complexes with the calf thymus DNA (CT‐DNA) was determined by UV–Vis spectra. Binding efficiency between H ₂ L with the receptors of the prostate cancer (PDB code 2Q7L Hormone) and the breast cancer (PDB code 1JNX Gene regulation) was studied by molecular docking. The inhibition behaviour of H ₂ L against the corrosion of carbon steel / HCl (2 M) solution was studied by weight loss, Tafel polarisation, electrochemical impedance spectroscopy (EIS) and electrochemical frequency modulation (EFM) techniques. The adsorption isotherm was found to be Friendlish isotherm. The morphology of inhibited carbon steel? s surface was studied using scanning electron microscope (SEM) and energy dispersive X‐ray spectroscopy (EDS).     

Radiation induced polymerization of Vinylbenzoate–II. Study of the molecular weights of polymers

Abstract

In this study, the molecular weights of the polymer from vinyl benzoate has been reported for different dose rates and different temperatures. The mol.wt. remains around 4000. With increasing dose, the molecular weight increases to about 14,000. The degrees of polymerization and the kinetic chain lengths calculated from the experimentally determined G _R values have been compared which show that the kinetic chain length is larger than the D ^? Pn.

From a plot of the (D ^? Pn)^?1 vs. R _p , an intercept is obtained which is equal to 3.25 × 10^?2 which is higher than obtained in conventional polymerization. By examining the effect of temperature on mol.wt., the dependence of R _p on dose rate and the absence of induction period it has been concluded that chain transfer occurs to impurities that are generated during radiolysis.     

Luminescence characterisation of alumina substrates using cathodoluminescence microscopy and spectroscopy

Polycrystalline alumina (Al₂O₃) substrates, found in many electronic devices and proposed as dosemeters in emergency situations, were invstigated using a scanning electron microscope (SEM) equipped with cathodoluminescence (CL) and elemental analysis probes. The characteristics of the CL spectra, surface morphology, and impurity content of the Al₂O₃ substrates were examined and compared with those of single crystal dosimetry-grade Al₂O₃:C. Whereas the CL spectrum, measured from 250 to 800 nm, for the Al₂O₃:C, contained resolved bands located at ∼340 nm and at ∼410 nm, the spectrum measured with the Al₂O₃ substrate was significantly broader, extending from ∼250 to ∼450 nm, and also included a narrow band at 695 nm. While it is likely that the accepted model of recombination at F⁺ (∼340 nm) and F (∼410 nm) in Al₂O₃:C also applies to the substrate, it is suggested that the presence of impurities within the alumina give rise to additional recombination centres. The 695 nm emission has been assigned to a Cr³⁺ ion impurity in previous work on alumina and a band indicated at ∼300 nm may be associated with Mg²⁺ or Ca²⁺_, the presence of which was confirmed by elemental mapping. Comparison of the spatial distribution of CL with the surface morphology and elemental composition of the samples indicates that the components of the emission spectrum can be qualitatively correlated with impurity content and morphological features of the samples.     

Generation of linear and nonlinear waves in numerical wave tank using clustering technique-volume of fluid method

A two-dimensional (2D) numerical model is developed for the wave simulation and propagation in a wave flume.The fluid flow is assumed to be viscous and incompressible,and the Navier-Stokes and continui...     

Studies on Synthesis and Characterization of Charge Transfer Polymerization of Styrene and Alkyl Methacrylates

Abstract

Copolymers involving styrene and homologues of alkyl methacrylates (viz., methyl, ethyl, and butyl methacrylates) were synthesized at 60°C by employing a mixture of n‐butylamine and carbontetrachloride as charge transfer (CT) initiators in dimethyl sulphoxide medium. The CT complex was characterized by UV spectroscopy while the respective copolymers were characterized by employing infrared (IR) and ¹H NMR spectroscopy. The copolymer compositions were determined by using ¹H NMR spectroscopy and the reactivity ratios were computed by Fineman–Ross (F–R) and Kelen–Tudos (K–T) methods. The reactivity ratios of Sty‐MMA and Sty‐EMA copolymers indicate that higher level of styrene is incorporated in the copolymer. On the other hand the Sty‐BMA system exhibits different behavior. The higher value of r ₂ is obtained denoting that BMA is more active than styrene and hence, more BMA is present in the copolymer chain. In Sty‐MMA and Sty‐BMA systems, the product of r ₁ and r ₂ is greater than 1, representing the formation of high degree of random copolymers. However, in the case of Sty‐EMA, the product of r ₁ and r ₂ is less than 1 indicating the formation of alternating copolymer.