计算机透析成像技术在岩土工程中的应用

系统综述了计算机透析成像技术（CT）的基本原理及其在岩土工程中的应用现状,包括CT的图像重建理论、CT图像分析的进展、岩土材料损伤的探测方法、岩土材料结构变化的动态监测、岩土材料本构模型的建立等方面。     

Significance of grafting in curing processes initiated by UV, excimer and ionising radiation sources

The grafting of a typical methacrylate monomer (MMA) to polypropylene (PPE) and cellulose initiated by UV and ionising radiation is reported. The effect of additives which constitute components in radiation curing on the grafting process is examined. Additives studied include photoinitiators (PIs), multifunctional acrylates and methacrylates and acrylate oligomers. Synergistic effects when these additives are combined in the same solution are reported. The photografting studies have been extended to include grafting with charge transfer (CT) complexes involving donor/acceptor (DA) monomers to PPE, cellulose and wool. The importance of this work in conventional and PI free curing is discussed, particularly the significance of concurrent grafting during curing.     

压缩载荷下孔隙结构变化的CT实验研究

为了研究孔隙对岩石力学性能的影响,利用自制的孔隙物理模型,通过 单轴压缩和CT扫描实验研究了受载条件下孔隙率对岩石孔隙结构的演化及其对外部物理力 学性能的影响,得到了不同加载阶段和不同CT观察尺度下孔隙模型的裂纹扩展规律以及孔隙 和固体介质的损伤变化情况. 实验结果表明：孔隙模型在受载条件下裂纹主要发生在峰值荷 载之后,主裂纹大都集中在孔隙密集的地方且伴随许多细小裂纹的产生;峰值载荷前出现了 少数微裂纹,微裂纹的产生与演化主要发生在孔隙周边.     

与医用CT配套的便携式材料试验机的研制及其在混凝土损伤研究中的应用

混凝土内部细观裂纹的演化规律研究可以解释其动态特性和损伤破坏机理.X射线CT技术是无损探测混凝土内部细观裂纹萌生、扩展、贯通的有效手段.与医用CT配套的便携式材料试验机是进行混凝土CT试验的关键加载设备.本文概要介绍研制便携式材料试验机的研制过程.论述实现动态加载的几个关键技术问题,包括加载设备的便携式要求、加载波形显示、加载控制、试件安装和粘结技术等.经过试验,表明所研制的加载设备达到了使用要求.混凝土动力压缩条件下突发性裂纹的出现是其动态强度提高的原因之一.     

螺旋CT成像联合血清copeptin、IL-18水平检测在急性脑梗死患者神经功能及预后评估中的应用价值

本文选取74例急性脑梗死(ACI)患者作为研究对象,入院时根据美国国立卫生院卒中量表(NIHSS)评分分为重度组(NIHSS评分＞15分,n=21)、中度组(NIHSS评分5?15分,n=24)、轻度组(NIHSS评分＜5分,n=29),均接受血清copeptin和IL-18水平检测及螺旋CT成像检查.结果发现,随AC...     

基于同步辐射原位CT的水牛角结构性能关系研究

为探究水牛角的结构性能关系,基于上海同步辐射光源搭建了高分辨原位CT系统,对水牛角角鞘进行初始表征和准静态压缩下的实时表征,并通过Top-Hat方法提取了角鞘内孔洞三维形貌.结果显示,水牛角角鞘孔隙率在1％左右,椭圆柱状孔洞沿牛角生长方向排列成线,首尾相连却并未连通,均匀分布在波浪状片层之间.孔洞特征椭球的轴长分布满足...     

基于改进U-Net++的CT影像肺结节分割算法

卷积神经网络的语义分割模型未有效利用特征权重信息,导致在医学图像复杂场景中分割边界出现欠分割现象.针对该问题,基于融合自适应加权聚合策略提出一种改进的U-Net++网络,并将其应用于电子计算机断层扫描影像肺结节分割.该模型首先在卷积神经网络中提取出不同深度特征语义级别的信息,再结合权重聚合模块,自适应地学习各层特征的权...     

Analysis of phantom centering positioning on image noise and radiation dose in axial scan type of brain CT

ABSTRACT

This study examined the dose and image quality according to the position change of a human phantom in a CT scan. This study used an MDCT 128 Slice CT Scanner instrument. An axial scan was performed with a 16 cm CTDI phantom of a human phantom, and the dose was measured using a pencil chamber meter. The phantom was scanned 10 cm above and below the isocenter and 15 cm above the right and left. The position of the phantom is indicated by C-0 in the isocenter position, S-10 in the upper 10 cm, I-10 in the lower 10 cm, R-15 in the right 15 cm, and L-15 in the left 15 cm. The test was performed 30 times using the brain CT protocol to calculate the dose and the dose width product (DWP). The acquired images were analyzed using the ImageJ program. Statistical analysis was performed using SPSS with one-way ANOVA (p < .05). The mean DWP values of the CT scanner were C-0 31.97 mGy·cm, S-10 24.52 mGy·cm, I-10 24.28 mGy· cm, R-15 17.95 mGy·cm, and L15 17.6 mGy·cm. Compared to the isocenter (C-0), the DLP values measured at each site were 23.3% for S-10, 24% for I-10, 43.8% for R-15, and 44.9% for L15. A significant difference in the one-way ANOVA statistical process was observed (p>0.05). C-0 was measured to be 7.42 HU, S-10 7.87 HU, I-10 8.4 HU, R-15 117 HU, and L-15 13.6 HU for evaluating the image quality. Compared to C-0, S-10 was 5.39%, I-10 was 13.2%, R-15 was 57.6%, and L-15 was 83.2%. The PSNR for S-10, I-10, R-15, and L-15 was 17.37, 17.5, 16.62, and 16.37 dB, respectively. A good quality image can be obtained by positioning the subject precisely in the isocenter in the axial scan, if possible, because the irradiated dose to the subject is low, which can lead to an increase in noise in image reconstruction.     

钨合金柱形弹超高速撞击水泥砂浆靶的侵彻深度研究

为探索钨合金柱形弹超高速撞击水泥砂浆靶的侵彻深度随撞击速度变化规律,利用二级轻气炮开展了?3.45 mm×10.5 mm的克级93 W钨合金柱形弹以1.82~3.66 km/s的速度撞击水泥砂浆靶的实验,利用CT图像诊断技术获得了侵彻深度和残余弹长随撞击速度的变化规律,对超高速撞击过程进行了数值模拟,结合数值模拟结果进一步分析了超高速撞击物理过程。结果表明:(1)超高速撞击条件下成坑是弹坑+弹洞型;(2)侵深-速度曲线呈现先增大后减小的现象,在弹速2.6 km/s附近存在侵彻深度极大值,约为8.5倍弹长,相对于中低速侵彻的深度并没有显著优势。(3)通过基于数值模拟得到的弹靶界面压力时程曲线将侵彻过程分为4个阶段,其中准定常侵彻阶段和第三侵彻阶段是决定总侵深的主要阶段。(4)随撞击速度增加,弹体侵蚀逐渐剧烈,此时准定常侵彻阶段的侵深变化不大,而第三侵彻阶段中的刚体侵彻部分大幅降低,导致总侵深大幅降低,使总侵深曲线呈现先增大后减小的现象。