A new method to determine the projected coordinate origin of a cone-beam CT system using elliptical projection

In order to determine the projected coordinate origin in the cone-beam CT scanning system with respect to the Feldkamp-Davis-Kress(FDK)algorithm,we propose a simple yet feasible method to accurately measure the projected coordinate origin.This method was established on the basis of the theory that the projection of a spherical object in the cone-beam field is an ellipse.We first utilized image processing and the least square estimation method to get each major axis of the elliptical Digital Radiography(DR)projections of a group of spherical objects.Then we determined the intersection point of the group of major axis by solving an over-determined equation set that was composed by the major axis equations of all the elliptical projections.Based on the experimental results,this new method was proved to be easy to implement in practical scanning systems with high accuracy and anti-noise capability.     

A segmentation procedure of the pervious area of the aorta artery from CT images without contrast medium

In this paper, we develop an algorithm for the segmentation of the pervious lumen of the aorta artery in computed tomography (CT) images without contrast medium, a challenging task due to the closeness gray levels of the different zones to segment. The novel approach of the proposed procedure mainly resides in enhancing the resolution of the image by the application of the algorithm deduced from the mathematical theory of sampling Kantorovich operators. After the application of suitable digital image processing techniques, the pervious zone of the artery can be distinguished from the occluded one. Numerical tests have been performed using 233 CT images, and suitable numerical errors have been computed and introduced ex novo to evaluate the performance of the proposed method. The above procedure is completely automatic in all its parts after the initial region of interest (ROI) selection. The main advantages of this approach relies in the potential possibility of performing diagnosis concerning vascular pathologies even for patients with severe kidney diseases or allergic problems, for which CT images with contrast medium cannot be achieved.     

GPS/LEO掩星正则变换反演方法

利用无线电全息方法, 如正则变换方法或全谱反演方法, 可以有效地解决大气多路径条件下GPS掩星信号的反演问题. 本文采用正则变换方法反演掩星资料, 模拟仿真反演结果显示正则变换方法可以准确地反演包含大气多路径效应的信号. 在模拟信号的相位中加入不同程度的高斯相位噪声后, 正则变换方法的反演结果会受到不同程度的影响. 用正则变换方法对2007年第71天至73天共约4500个COSMIC数据进行处理. 将其折射率反演结果和atmPrf资料 (利用全谱反演方法计算得到) 一起, 与对应的ECMWF 分析场资料进行统计比较, 结果表明: 在5 km以下, 正则变换方法计算的折射率的相对误差的平均值普遍大于atmPrf资料. 其原因可能为: 正则变换方法将信号从LEO轨迹后传播至辅助屏, 造成孔径缩小, 精度下降. 同时也讨论了信号截断对低对流层中反演精度和掩星个数的影响. 关键词： 无线电掩星 大气多路径 多相位屏技术 正则变换方法     

多层螺旋CT诊断甲状腺癌中的辐射和对比剂剂量选择

本文对多层螺旋CT（MSCT）诊断甲状腺癌中的辐射和对比剂剂量选择进行了分析。选取2016年12月～2018年12月本院行MSCT检查的甲状腺癌、甲状腺良性结节患者各200例,依据随机数字表分为A组、B组、C组、D组,每组50例,A组参数为对比剂1.2 mL/kg、120 kV、180 mA,B组为对比剂1.0 mL/kg、120 kV、180 mA,C组为对比剂1.2 mL/kg、100 kV、100 mA,D组为对比剂1.0 mL/kg、100 kV、100 mA。结果显示,A组和B组CT容积剂量指数（CTDIvol）、剂量长度乘积（DLP）、有效辐射剂量（ED）明显低于C组和D组,A组和B组甲状腺CT值、背景信号、背景噪声明显高于C组和D组,差异有统计学意义（P<0.05）,A组、B组、C组、D组信噪比（SNR）、对比信噪比（CNR）、图像质量评分比较,差异无统计学意义（P>0.05）;A组、B组、C组、D组诊断甲状腺癌的敏感度、特异度、准确度比较,差异无统计学意义（P>0.05）。本文证实,对于MSCT诊断甲状腺癌中的辐射和对比剂剂量,选择1.0 mL/kg、100 kV、100 mA可在不严重影响图像质量及检查结果下有效减少患者的CT辐射,值得临床推广。     

Study of readout and cross-talks for multi-strip RPC with PSpice simulation

An electrical model for multi-strip resistive plate chamber (RPC) is presented, and a comparison between simulation results and test data is carried on. Based on the model, the influences of the RPC's design parameters on the readout are studied with PSpice simulation. Cross-talk (CT) phenomenon is observed and the relative amplitudes of the CT are studied for different design parameters.     

IDose^4迭代重建技术应用于低剂量CT肾动脉血管造影的临床分析

为探讨IDose 4迭代重建技术在低剂量CT肾动脉血管造影中的应用价值,选取205例拟行肾动脉CT血管造影患者,随机将其分为4组,A组(51例)采用管电压100 kV、管电流100 mA,碘海醇370 mg I/mL及IDose 4迭代重建技术,B组(51例)采用管电压100 kV、管电流150 mA,碘海醇270 mg I/mL及IDose 4迭代重建技术,C组(51例)采用管电压80 kV、管电流180 mA,碘海醇270 mg I/mL及IDose 4迭代重建技术,D组(52例)管电压120 kV、管电流120 mA,碘海醇370 mg I/mL及滤波反投影(FBP)重建技术。分析各组图像肾主动脉干CT值、噪声(SD)、信噪比(SNR)和噪声比(CNR),受检者接受CT有效剂量(ED)、容积CT剂量指数(CTDI vol)、剂量长度乘积(DLP)、碘摄入量以及重建图像评分差异和诊断效能。结果显示,A、B、C组重建图像评分优于D组,肾动脉主干CT值、SD、SNR、CNR均高于D组,B、C组肾动脉主干CT值、SD略低于A组。A、B、C组CTDI vol、DLP、ED均低于D组,B组CTDI vol、DLP、ED高于A组。A、B、C、D组诊断肾主动脉狭窄准确率分别为92.68%、86.49%、84.62%、82.86%。证实IDose 4迭代重建技术能降低受试者受辐射和造影剂剂量,提高成像质量,在低剂量CT肾动脉血管造影中具有较高可行性和实用性。     

Measurement and quantitative analysis of fiber orientation distribution in long fiber reinforced part by injection molding

The fiber orientation distribution is one of the important microstructure variables for thermoplastic composites reinforced with discontinuous fibers. In this paper, the long fibers in the injection molded part are measured in detail by micro X-ray CT. A three dimensional (3D) structure of the sample is built and two dimensional images are generated for image analysis. The orientation tensor of fibers is calculated in the flow plane. It shows a symmetric distribution of fibers through the thickness direction, which consists of outer skin, transition zone and the core. The skin layer is so thin that it has only one layer of highly oriented fibers. The core layer also has highly oriented fibers but the direction of fibers is different from that in the skin layer. Nevertheless, the clustering of the fibers is characterized quantitatively in the core. The transition zone can be divided into two subzones by the principal directions of the tensor.     

超小金纳米簇用于荧光及CT双模态成像的研究

基于金纳米簇强烈的量子限制效应（strong quantum confinement effect,SQCE）,采用一步合成法,制备了同时具有高效近红外荧光与CT双模态成像能力的超小金纳米簇.实验表明,通过优化合成比例以及合成条件,所合成的超小金纳米簇具有很大的斯托克斯（Stokes）位移、较高的荧光强度和X射线吸收效率.除此之外,该超小金纳米簇具有良好的单分散性、稳定性和生物相容性.4T1肿瘤细胞荧光成像实验结果表明,该纳米粒子可被肿瘤细胞快速、高效地摄取.     

Cloning, Expression and Purification of Wheat Acetyl-CoA Carboxylases CT Domain in E.coil

The entire gene of carboxyltransferase(CT) domain of acetyl-CoA carboxylase(ACCase) from Chinese Spring wheat(CSW) plastid was cloned firstly,and the 2.3 kb gene was inserted into PET28a+ vector and expressed in E.coil in a soluble state.The (His)6 fusion protein was identified by SDS-PAGE and Western blot.The recombinant protein was purified by affinity chromatography,and the calculated molecular mass(Mr) was 88000.The results of the sequence analysis indicate that the cloned gene(GeneBank accession No.EU124675) was a supplement and revision of the reported ACCase CT partial cDNA from Chinese Spring wheat plastid.The recombinant protein will be significant for us to investigate the recognizing mechanism between ACCase and herbicides,and further to screen new herbicides.     

Cloning, Expression and Purification of Wheat Acetyl-CoA Carboxylases CT Domain in E. coil

The entire gene of carboxyltransferase（CT） domain of acetyl-CoA carboxylase（ACCase） from Chinese Spring wheat（CSW） plastid was cloned firstly, and the 2.3 kb gene was inserted into PET28a^＋ vector and expressed in E. coil in a soluble state. The （His）6 fusion protein was identified by SDS-PAGE and Western blot. The recombinant protein was purified by affinity chromatography, and the calculated molecular mass（Mr） was 88000. The results of the sequence analysis indicate that the cloned gene（GeneBank accession No. EU124675） was a supplement and revision of the reported ACCase CT partial cDNA from Chinese Spring wheat plastid. The recombinant protein will be significant for us to investigate the recognizing mechanism between ACCase and herbicides, and further to screen new herbicides.