Osmotic Coefficients of Aqueous Solutions of Some Poly(oxyethylene) Glycols at the Freezing Point of Solution

Summary. The freezing temperatures of dilute aqueous solutions of some poly(oxyethylene) glycols (PEG, HO–(CH₂CH₂O) _n –H, n varying from 4 to 117) were measured over a solute to solvent mass ratio from 0.0100 to 0.3900. The second and third osmotic virial coefficient (A ₂₂ and A ₂₂₂) of poly(oxyethylene) glycols in aqueous solution were determined. The molecular weight dependence of the second virial coefficient can be described by a simple relation A ₂₂=2×10^–5 M _n ^1.86, and the third virial coefficient is A ₂₂₂=0.038A ₂₂ ². The activity coefficients of the solute were calculated using the Gibbs-Duhem equation as applied by Bjerrum. From the osmotic and activity coefficients the excess Gibbs energies of solution, as well as the respective partial molar functions of solute and solvent and the virial pair interaction coefficients for the excess Gibbs energies were estimated. The second and the third osmotic virial coefficients are correlated with the Mc-Millan-Mayer virial coefficients.     

Determination of the valence distribution of vanadium in polyolefin catalysts prepared from vanadium trichloride

An electrochemical method has been developed for determining the relative amounts of V(II) and V(III) in polyolefin catalysts prepared using aluminum alkyls and vanadium trichloride. The catalyst, usually obtained as a slurry in n-heptane, is titrated potentiometrically with ceric sulfate using a platinum indicator electrode. Under proper experimental conditions, 2 breaks are obtained, corresponding to the reactions V(II) →V(III) + e and V(III) →V(IV) + e. Interferences from other components of the catalyst are negligible. The method is useful for the analysis of both laboratory catalysts and grab samples taken from pilot plant reactors.     

Characterization of thermo-oxidative stability of polymer optical fibers using chemiluminescence technique

The thermo-oxidative stability of commercially available polymer optical fibers (POFs) and their components (cores and claddings) was investigated. All the bare POFs (core and cladding only) studied here were based on poly(methyl methacrylate) (PMMA) core. The fibers were exposed to 100 °C/low humidity for about 4200 h. Chemiluminescence (CL) technique was applied to investigate the thermo-oxidative stability and for measuring the transmission loss during exposure a prototype device called multiplexer was used. POFs exhibited variation in thermo-oxidative stability although they possessed identical core material PMMA. This was due to difference in the chemical compositions of claddings. Claddings were more susceptible to the thermo-oxidative degradation compared to cores. The thermo-oxidative degradation of both the cladding and the core was found in POFs as a result of climatic exposure. POFs showed an early drop-off followed by a slow decline of transmission. The early drop-off of transmission was attributed to physical changes like thermal expansion and the slow decline of transmission to chemical changes like oxidative degradation of POFs. A good linear relationship between optical transmission stability and thermo-oxidative stability of POFs was established from these studies.     

Kinetic resolution of heterocyclic amines by reaction with optically active acid chlorides. The effect of reaction conditions on the diastereoselectivity of acylation of (±)-3-methyl-2,3-dihydro-4H-1,4-benzoxazine

The influence of the reaction conditions (solvent, base) on the diastereoselectivity of acylation of (±)-3-methyl-2,3-dihydro-4H-1,4-benzoxazine with (S)-naproxen and N-tosyl-(S)-proline chlorides was studied. The highest diastereoselectivity was observed for the reaction carried out in benzene in the presence of aliphatic tertiary amines.     

Calculating the energies for Ag(001) twist boundaries utilizing the modified analytical embedded atom method

The unrelaxed energies for Ag(001) twist grain boundaries (GBs) have been calculated using the modified analytical embedded atom method (MAEAM). The results show that, besides zero energy in a perfect crystal (corresponding to the twist angle 0°), the second smallest GB energy corresponds to the twist angle 36.87°. This is consistent with the experimental results. For other twist angles, the GB energies remain nearly constant even for a twist angle as small as 1.94°. Translation parallel to the boundary plane could result in a periodic change in GB energy. Copyright © 2004 John Wiley & Sons, Ltd.     

Formulation–composition map of a lecithin-based emulsion

Formulation–composition map is an interesting tool to predict the nature of an emulsion, stability, viscosity and nevertheless to decide the mixing protocol of its ingredients. Information based on optimum formulation (environmental conditions at which the affinity of an emulsifier for oil and for aqueous phase is same), which is depicted through hydrophilic–lipophilic deviation (HLD) concept, is necessary to make a formulation–composition map of an emulsion. In order to apply this concept in food emulsions, it is necessary to determine characteristic constants of each component of the system, i.e. the aqueous phase, the oil phase and the emulsifier at equilibrium. In this work formulation–composition map of a sunflower oil–water–lecithin system, based on the knowledge of phase behavior of lecithin at equilibrium and emulsification, was made. The shape of inversion line on formulation–composition map was not the classical stair type rather an almost vertical inversion line at water-fraction (f_w) near 0.20 was observed. It was supposed to be linked to the viscosity of oil phase which was 50 times the viscosity of aqueous phase. Additionally, emulsions were of oil-in-water (O/W) type for f_w higher than 0.20, but their viscosity and the drop size behavior with respect to salt concentration as formulation variable did not show the existence of transitional inversion line on formulation–composition map. Such map in advance can certainly facilitate the guidelines for dynamic emulsification.     

Zur Kenntnis des Natrium-tetrahydroxoaluminat-chlorids Na2[Al(OH)4]Cl

On the Sodium Tetrahydroxoaluminate Chloride Na₂[Al(OH)₄]Cl The hitherto unknown compound Na₂[Al(OH)₄]Cl was prepared by crystallisation from a NaCl containing sodium aluminate solution. According to the X-ray single crystal investigation (tetragonal, space group P4/nmm, a = 7.541 Å, c = 5.059 Å, Z = 2) the compound represents the first example of a crystalline hydroxoaluminate with monomeric [Al(OH)₄]^? anions. Cl^? shows a quadratic anti prismatic coordination to 4 Na⁺ and over hydrogen bonds to 4 O^2? while Na⁺ is octahedrally coordinated by 4 O^2? and 2 Cl^? (axial). The results of the crystal structure analysis are confirmed by ²⁷Al and ²³Na MAS NMR investigations. Na₂[Al(OH)₄]Cl decomposes at about 200°C without intermediates under formation of β-NaAlO₂ and NaCl.     

Silver (I)-promoted asymmetric halohydrin reaction of chiral N-enoyl-2-oxazolidinones: scope and limitations

The halohydrin reaction of chiral N-enoyl-2-oxazolidinones 1 by halogen (Br₂/I₂) and water were efficiently carried out in aqueous organic solvent promoted by silver(I) with high anti- and regioselectivity and moderate to good diastereoselectivities. The alkenoyl, cinnamoyl and electron-deficient cinnamoyl substrates smoothly underwent bromohydrin reaction in aqueous acetone but no iodohydrin reaction, where as electron-rich cinnamoyl substrates preferred to undergo iodohydrin reaction in aqueous acetone with moderate diastereoselectivity and enhanced diastereoselectivity was observed in aqueous THF.     

Bismuth(III) nitrate pentahydrate—a mild and inexpensive reagent for synthesis of coumarins under mild conditions

Bismuth(III) nitrate pentahydrate is found to be an efficient catalyst for the Pechmann condensation reaction of phenols and β-ketoesters under solvent-free conditions. The reaction protocol is simple and is followed by aqueous work-up leading to the formation of the corresponding coumarin derivatives in good yield and high purity.     

Synthesis and characterization of new poly[phenylquinoxaline(ether)imides]

A series of new aromatic poly[phenylquinoxaline(ether)imides] were synthesized by solution polycondensation of aromatic diamines containing preformed phenylquinoxaline groups with dianhydrides having ether linkages and isopropylidene or hexafluoroisopropylidene units. All polymers are readily soluble in polar organic solvents (N-methylpyrrolidinone, DMF, dimethylacetamide) and in less polar liquids such as chloroform. Very thin coatings were deposited onto silicon wafers. According to atomic force microscopy, they had a smooth, pinhole-free surface. The polymers showed high thermal stability with decomposition temperatures above 470 °C and glass transition temperatures in the range of 210–238 °C, being thus characterized by a large gap between the glass transition and decomposition temperatures.Based on the report presented at the International Conference Modern Trends in Organoelement and Polymer Chemistry dedicated to the 50th year anniversary of the A. N. Nesmeyanov Institute of Organoelement Compounds of the Russian Academy of Sciences (Moscow, May 30–June 4, 2004).Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 9, pp. 1952–1957, September, 2004.