Oxidation of 2-dialkylaminomethyl-4,6-di-tert-butylphenols

Oxidative transformations of 2-dialkylaminomethyl-4,6-di-tert-butylphenols depend on the nature of the oxidant, the character of the substituents at the nitrogen atom, and the medium. A mechanism of the oxidation of these compounds is suggested. The molecular structure of the compound obtained as a result of oxidative trimerization of 2-dimethylaminomethyl-4,6-di-tert-butylphenol was established by X-ray structural analysis. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 7, pp. 1328–1335, July, 1997.     

Effects of processing on the structure of zein/oleic Acid films investigated by x-ray diffraction

Zein films plasticized with oleic acid were formed by solution casting, by the stretching of moldable resins, and by blown film extrusion. The effects of the forming process on film structure were investigated by X-ray diffraction. Wide-angle X-ray scattering (WAXS) patterns showed d-spacings at 4.5 and 10 A, which were attributed to the zein alpha-helix backbone and inter-helix packing, respectively. The 4.5 A d-spacing remained stable under processing while the 10 A d-spacing varied with processing treatment. Small-angle X-ray scattering (SAXS) detected a long-range periodicity for the formed films but not for unprocessed zein, which suggests that the forming process-promoted film structure development is possibly aided by oleic acid. The SAXS d-spacing varied among the samples (130-238 A) according to zein origin and film-forming method. X-ray scattering data suggest that the zein molecular structure resists processing but the zein supramolecular arrangements in the formed films are dependent on processing methods. Structural model for a zein molecular aggregate (based on Matsushima et al.10). Rectangular prisms of individual zein molecules are hexagonally aligned parallel to each other.     

Do intramolecular halogen bonds exist? Ab initio calculations and crystal structures’ evidences

Cl···O intramolecular contacts are analysed here. Hence the Cambridge Structural Database (CSD) search was performed to find five-membered Cl–C=C–C=O pseudo-rings closed through Cl···O intramolecular contacts. Such rings were analysed and it was found that some of Cl···O distances are smaller than the corresponding sum of van der Waals radii. Additionally ab initio MP2/6-311++G(d,p) calculations and AIM analyses were carried out here on 3-chloropropenal and its fluoro derivatives to deepen the nature of intramolecular Cl···O interactions, some of findings may indicate that they are attractive and stabilizing ones. This paper is dedicated to Prof. T. M. Krygowski on the occasion of his 70th birthday     

Adsorption, diffusion and desorption of chlorine on and from rutile TiO2{110}: a theoretical investigation.

The adsorption, diffusion and desorption of chlorine on and from stoichiometric, reduced and partially reduced (defective) rutile TiO2{110} are investigated using ab initio density functional theory (DFT) calculations. Theoretical results are compared with experimental investigations, and microkinetic simulations based on DFT values are then used to verify the diffusion mechanisms assumed in the experimental investigations.     

(AB)8(AB=BN，AlP，GaAs，InSb)团簇环状结构与性质的密度泛函理论研究

用杂化密度泛函B3LYP方法研究了(AB)₈(AB=BN，AlP，GaAs，InSb)团簇环形结构的平衡几何构型、电子结构、振动特性以及极化率。计算结果表明，(AB)₈团簇的双层环状结构中，每个A(B)原子都与3个B(A)原子成键，且Ⅴ族元素的原子比Ⅲ族元素的原子更接近团簇中心，(BN)₈、(AlP)₈、(GaAs)₈、(InSb)₈的平均极化率依次增大，IR和Raman谱峰发生红移。另外，讨论了热力学稳定性和动力学稳定性的变化。     

喷雾热解法合成球形(Y,Gd)BO3:Eu荧光粉的研究

采用喷雾热解法合成了无团聚的球形(Y,Gd)BO3∶Eu荧光粉。研究了各因素对(Y,Gd)BO3∶Eu荧光粉体的结晶性能、外观形貌及发光强度的影响。结果表明,按120%硼酸的化学计量比于900℃喷雾热解,再经过1200℃后处理2 h,可以合成结晶良好的(Y,Gd)BO3∶Eu荧光粉体;喷雾热解溶液的浓度和载气流量对荧光粉的外观形貌影响较大;铕含量为10%时可以获得最佳的发光强度。在优化喷雾热解实验条件下成功合成出良好发光强度的PDP用(Y0.6Gd0.3)BO3∶Eu0.1荧光粉。     

氯化钠在球形纳米氧化铈形成过程中的作用

以水合碳酸铈为原料, 以氯化钠作为助磨剂和阻聚剂, 采用机械活化法制备了球形纳米氧化铈, 用XRD法研究了水合碳酸铈与氯化钠质量比、球磨时间、煅烧温度对CeO2粉体晶粒度的影响, 用TEM对最终产物粒子进行形貌观察. 结果表明: 在碳酸铈的球磨过程及其随后的煅烧过程中, 氯化钠的存在起到了很好的助磨和阻聚作用, 所得CeO2为类球形粒子, 分散性较好, 晶粒度约为30～50 nm.     

Strained Structure in Ho0.5Sr0.5MnO3

The Ho_0.5Sr_0.5MnO₃ perovskite, synthesized in air, has been studied by combining neutron powder and electron diffraction techniques. The Pnma-type structure exhibits a strong tilting of the MnO₆ octahedra. This octahedra tilting and microtwinning involve a complex strained structure. No structural transition is observed down to 1.4 K, but short-range A-type antiferromagnetism running over only a few perovskite subcells is evidenced below ≈90 K. The different behavior of this perovskite compared to other Ln_0.5Sr_0.5MnO₃ perovskites is discussed in terms of A-site cationic mismatch.     

Non-isothermal kinetics of dehydration of equilibrium swollen poly(acrylic acid) hydrogel</o:p>

Summary Kinetics of dehydration of equilibrium swollen poly(acrylic acid) hydrogel was investigated using methods of non-isothermal thermal analysis. Methods of Kissinger, Coats-Redfern, Van Krevelen and Horowitz-Metzger were applied for determination the kinetics parameters: activation energy (E), pre-exponent (lnA) as well as the kinetics model ƒ(69) for the process of hydrogel dehydration under different heating rates. An existence of good agreement between determined values of kinetic parameters (Eand A), which were obtained applying different methods under the same heating rate. Functional relationship between changes of kinetic parameters of dehydration and changes of heating rate was established. An existence of compensation effect is accepted and explanation of compensation effect appearance during the hydrogel dehydration is suggested.     

The Role of γ -Aminopropyltriethoxysilane (γ -APS) on Thermal Stability of TEOS-PDMS Ormosils

The degradation process of TEOS-PDMS Ormosils containing different amounts of γ -APS has been studied by means of DTA, TG, FTIR and ²⁹Si-NMR measurements. It has been found that the amount of γ -APS improved the thermal properties of Ormosil materials. The increase in γ -APS content causes the increment on the decomposition temperatures and activation energies of the studied Ormosils. These results have been attributed to the favourable effect of γ -APS in the copolymerisation reaction between TEOS and PDMS molecules. ²⁹Si-NMR analyses have shown that the incorporation of γ -APS increases the concentration of D(Q) units in the Ormosil structure, i.e., increases the number of TEOS molecules bonded to PDMS ones. Initial decomposition temperature (IDT), temperature of maximum weight loss rate (T_max), integral procedure decomposition temperature (IPDT) and activation energy values (E) were calculated from different equations which described the degradation of these materials. Addition of 10 wt% γ -APS produced an increase of 63^∘C in the IDT and of 115 and 110^∘C, respectively, for T_max and IPDT (up to 478 and 610^∘C) compared to the free γ -APS Ormosil. Activation energy values also rise up to 69.4 kJ⋅ mol⁻¹ by introducing 10 wt% of γ -APS.