毛细管电泳-柱端安培检测法用于抗癌药物2-氨基-6-巯基嘌呤和8-氮杂鸟嘌呤的研究

采用毛细管电泳-安培检测法建立一种简单、快速、有效的同时分析抗癌药物2-氨基-6-巯基嘌呤和8-氮杂鸟嘌呤的新方法.在长50 cm、内径为25μm的未涂层毛细管中,采用20 mmol/L磷酸盐(pH为7.0)缓冲液作为运行液,当分离电压为21 kV时,两组分在12 min内达到基线分离.在上述最佳分离条件下,当电极电位为1.050V、进样时间为10 s时,2-氨基-6-巯基嘌呤和8-氮杂鸟嘌呤的峰电流和浓度之间呈良好的线性关系,其相关系数分别为0.999 20、.999 0,检测限分别为3.0×10-7、2.0×10-7mol/L.7次重复实验2-氨基-6-巯基嘌呤和8-氮杂鸟嘌呤的日间峰电流RSD分别为2.44%3、.46%.利用该法检测了牛血清蛋白中的2-氨基-6-巯基嘌呤和8-氮杂鸟嘌呤,回收率分别为100%-113%,93.0-102%.     

基于风洞试验的不同坡度多跨锯齿屋面风压特性研究

多跨锯齿屋面因其具有跨度大、结构轻盈的特点成为典型的风灾易损结构.目前国内规范对锯齿屋盖的风荷载规定较为粗略,简单给定了统一的风压系数参考值,在实际工程应用中具有一定的局限性.本文以某4跨锯齿房屋为研究对象,通过风洞试验测试了15°、21°、26°、30°和40°等5种不同屋面坡度对锯齿屋盖风压特性的影响.试验结果表明...     

Capillary zone electrophoresis with UV-scanning detection for the analysis of metal species and their organic binding partners in biological systems

A capillary zone electrophoretic method with UV-scanning detection for the separation and identification of both free ligands and metal species is presented. The electrophoretic behavior of naturally occurring binding partners such as organic acids and amino acids was studied and compared with their metal-complexes. Copper(II) complexes of citrate and amino acids showed decreased electrophoretic mobilities and altered UV spectra. The optimized method was validated on ultrafiltered cow's milk and human milk samples. In cow's milk six low molecular weight substances, including citrate, orotate, and hippurate, could be separated. Metal supplementation with Cu(II), Ni(II), or Zn(II) decreased not only the citrate peak but also the orotate signal and in the case of copper(II) supplementation a new signal for the copper(II)-citrate complex appeared. In human milk samples various amino acids such as glutamate, phenylalanine, tyrosine, and tryptophan could be identified besides citrate. The electrophoretic mobilites and peak areas of the amino acids were also influenced by the metal supplementation.     

Statistical structure of the velocity field in cavitating flow around a 2D hydrofoil

Transformation of flow turbulence structure with cavitation occurrence, determination of the flow conditions favorable for nucleation of cavitation bubbles, influence of the statistical structure of turbulence on this process and the inverse effect of cavitation on the flow dynamics are challenging problems in modern fluid mechanics. The paper reports on the results of statistical processing of the velocity fields measured by a PIV technique in cavitating flow over a 2D symmetric hydrofoil for four flow conditions, starting from a cavitation-free regime and finishing by unsteady cloud cavitation. We analyze basic information on the statistical structure of velocity fluctuations in the form of histograms and Q-Q diagrams along with profiles of the mean velocity and turbulent kinetic energy. The research reveals that the flow turbulence pattern and distributions of turbulent fluctuations change significantly with the cavitation development. Under unsteady cloud cavitation conditions, the probability density function of the fluctuating velocity has a two-mode distribution, which indicates switching of two alternating flow conditions in a region above the hydrofoil aft part due to periodic passing of cavitation clouds. Behaviors of the mean and most probable velocities unexpectedly appear to be different with a monotonous increase of the incoming flow velocity. This finding must be caused by modification of the skewness coefficient of the fluctuating velocity.     

纤维复合材料界面横向拉伸分析

以单纤维十字型横向拉伸试验为研究对象,对纤维/基体界面采用弹性-软化双线性内聚力模型,建立了纤维复合材料在横向拉伸作用下界面法向失效过程的解析模型。得到了沿纤维/基体圆周界面的法向应力分布,纤维/基体界面的状态与界面承载力和单纤维复合材料承载力的关系,以及内聚力参数和试件几何尺寸对它们的影响。结果表明:纤维/基体圆周界面在脱粘前经历全部弹性及弹性+软化两种状态;当界面为弹性状态时,界面法向应力随界面强度线性增加;当界面为弹性+软化状态时,界面软化范围随界面裂纹萌生位移的增加而增大;界面初始脱粘位置与拉伸荷载方向重合;界面初始脱粘时的界面承载力随界面强度及界面裂纹萌生位移的增加而增加,随界面裂纹生成位移的增加而降低;单纤维复合材料的脱粘荷载受基体截面尺寸的影响,当纤维体积含量相同时,沿荷载方向截面尺寸的增大对提高脱粘荷载更显著。     

砂岩方梁断裂过程区范围的实验确定方法

裂纹前端的断裂过程区是引起岩石非线性断裂及尺寸效应的主要原因。利用数字图像相关技术对砂岩开展了三点弯曲梁实验,获得观测区域高精度的全场位移和应变数据,根据断裂韧带区域水平位移和水平应变的分布特征,结合裂尖岩石颗粒变化的微观分析,提出采用裂纹尖端水平位移波动性和水平应变突变性所得到的波动系数和水平应变突变值,确定断裂过程区形状和临界尺寸的方法。结果表明:砂岩断裂过程区的形状为不规则的狭长带状区域,断裂过程区的临界长度为11~13mm,临界宽度为1.58~2.36mm。断裂过程区区域内形变在趋向裂尖时呈指数增加,但其单位区域内的形变增量呈波动状态。该方法能够更加准确判断岩石断裂过程区的范围,有助于分析岩石的非线性断裂特性。     

区带毛细管电泳分离测定大黄提取液中游离蒽醌化合物

采用区带毛细管电泳法分离和同时测定大黄提取液中五种蒽醌化合物的含量。毛细管电泳的分离条件为:50 cm×75μm i.d.未涂层石英分光毛细管,分离电压20kV,0.05 mol/L KH2PO4-Na2HPO4(pH=8.2)缓冲溶液,紫外检测波长为254 nm,以氨基苯磺酸为内标。该法简便,快速,分辨率高,重现性好。     

光纤中基于双布里渊增益线的受激布里渊散射快光

为了解决受激布里渊散射快光在高吸收区产生损耗的问题,通过分析普通单模光纤中双线泵浦产生的双布里渊增益线特性及在增益峰间实现脉冲的超光速传输理论,利用有限元法数值模拟了双布里渊增益线处受激布里渊散射引起的快光特性。结果表明,当频率分离因子大于0.596时,可以观察到双增益峰;当频率分离因子在1~5.25范围内时,两个泵浦波产生的双增益峰之间可以明显地产生快光;当频率分离因子为1.75时,在双布里渊增益线之间的最大时间提前可达25 ps。当频率分离因子为2.42时,三阶色散所对应的归一化色散长度为无穷大,三阶色散可以得到完全补偿;当频率分离因子大于2.464时,脉冲展宽因子趋近于1,可以实现无畸变传输,但时间提前量小于13.52 ps。本文的研究结论对于在布里渊增益区实现快光具有一定的理论意义,并对设计基于受激布里渊散射快光器件具有理论指导作用。     

毛细管电泳柱上络合分离、间接紫外检测重金属离子

采用弱络合剂乙醇酸,柱上络合,间接紫外检测毛细管区带电泳(CZE)技术对重金属离子Ba2+、Cr3+、Cd2+、Pb2+及可能存在的干扰离子进行了分离研究。通过对背景电解质种类和浓度、缓冲液pH、有机添加剂等的优化,确定了最佳分离体系为含12 mmol/L络合剂乙醇酸的10 mmol/L吡啶溶液作为背景电解质(pH 4.0)。在电压15 kV,压差进样68.95 kPa.s,260 nm间接紫外检测条件下,采用50 cm(45.5 cm)×50μm(I.D.)石英毛细管,重复性实验(n=9):迁移时间RSD≤1.37%,峰高RSD≤1.70%,峰面积RSD≤3.55%;Pb2+、Ba2+和Cd3+的检出限(S/N=3)为0.2 mg/L,Cr3+的检出限为0.08 mg/L;在检出限至10 mg/L范围内,各离子的浓度与峰面积线性相关系数好于0.998。该方法并应用于实际样品的分析。     

毛细管区带电泳法分析头孢菌素类药物的纯度

摘要：提出了以pH9.20的20mmol/L硼酸缓冲溶液、pH6.86的20mmol/L磷酸缓冲溶液和pH2.05的50mmol/L磷酸缓冲溶液作为背景电解质分析9种头孢菌素类抗生素药物纯度的毛细管区带电泳方法。用内部归一化法定量,方法简单快速。讨论了方法的优点和局限性。