Stoichiometric ratio and doping effects on the thermal properties of sodium potassium sulphate crystals

The influence of stoichiometric ratio on the phase transition of sodium potassium sulphate (Na_xK_1–x)₂SO₄ crystals is investigated in the temperature range 300–500 K. The stoichiometric ratiox is chosen to bex=0.2, 0.3, 0.4, 0.8 and 0.9. The study has been carried out by using differential scanning calorimetry, DSC technique. The value of the specific heat,C _p, at the transition temperature,T _c , increases asx is increased up tox=0.4 and then decreases for higher values ofx. The change in the specific heat, C _p, is following a relation of the form C _p C _p (T–T _c /T _c )^– with = 0.12 which is in a fair agreement with the 3d Ising model. Insertion of Cu²⁺ ions into the lattice of (Na_xK_1–x)₂SO₄ crystals leads to a multiple peak in the temperature dependence ofC _p. The results are discussed from thermodynamical point of view.We would like to thank Prof. E. F. El-Wahidy, Prof. of Solid State Physics and Head of Physics Department, Faculty of Science, Alexandria University, for his interest and support of this work.     

聚苯胺导电复合物二次掺杂的基材效应

对十二烷基苯磺酸掺杂的聚苯胺与氯磺化聚乙烯或苯乙烯－丁二烯－苯乙烯三嵌段共聚物形成的复合物的二次掺杂进行了研究。二次掺杂的复合膜经反掺杂后的ＵＶ－Ｖｉｓ吸收光谱在５８０￣８００ｎｍ处呈现宽的吸收，证实了二次掺杂后ＰＡｎ主链的展开，同时表明ＰＡｎ在ＣＳＰＥ中的展开较在ＳＢＳ中更充分，ＥＳＲ动态测试表明二次掺杂诱导主链的载流子间相互作用有２种方式；ＰＡｎ／ＣＳＰＥ中的单极化子转变为双极化子；ＰＡｎ／Ｓ     

Resistance to Surfactant and Protein Fouling Effects at Conducting Diamond Electrodes

Boron‐doped diamond thin‐film electrodes display negligible fouling effects in the presence of high levels of surface‐active materials, including proteins. Dramatic improvements in the stability of the analyte response (compared to common glassy carbon and carbon paste electrodes) are illustrated using bovine serum albumin (BSA), gelatin, and Triton X‐100 in connection with repetitive square‐wave voltammetric (SWV) measurements. The voltammetric response of ascorbic acid at the diamond electrode exhibits negligible shifts in peak potentials and minimal depressions of current signals over a wide range of surfactant concentrations (0–750 ppm). For example, the diamond electrode exhibited 70, 50 and 60 mV potential shifts for 10 repetitive voltammetric scans in the presence of 100 ppm BSA, gelatin and Triton X‐100, respectively, compared to 120, 190, and 280 mV shifts observed at the glassy carbon electrode. Furthermore, only 4.3 and 6.2% of the initial current decays were observed in the presence of 100 ppm Triton X‐100 and gelatin, respectively (compared to 45.2 and 34.4% diminutions at the glassy carbon electrode). Such improved performance was also confirmed from the SWV measurements of uric acid, dihydroxyphenylacetic acid, and catechol. The greatly improved resistance to surfactant interference reflects the fact that the as‐grown diamond thin film, composed of oxide‐free and hydrogen‐terminated surface, has a relatively lower surface energy and minimal electrostatic attributes, either specific or general, so that little adsorption of surface‐active agents occurs. The topographic AFM images of the diamond electrode surface confirm a negligible BSA fouling effect after repetitive SWV measurements. Such enhanced antifouling features make diamond electrodes very attractive for numerous real‐life electroanalytical applications.     

低温反应制备高纯度纳米BN包覆Al2O3和ZrO2粉体

硼酸和尿素在氮气中于650℃反应,生成t-BN-Al2O3和t-BN-ZrO2纳米包覆粉.IR分析表明,反应产物中含CH2和CN基团的杂质属尿素缩聚的复杂产物,经450℃煅烧即可除去.硼酸和尿素完全反应,得到纯净的纳米复合粉体.BN产率大于99%,在复合粉中的含量与计算值吻合.     

一种基于形成杂多核络合物的荧光增敏效应的研究 Ⅲ.锰(Ⅱ)、钴(Ⅱ)的混合荧光增敏及其连续测定

本文研究了Mn~(2+)和Co~(2+)对7-(8-羟基-3,6-二磺基萘偶氮)-8-羟基喹啉-5-磺酸-硼砂反应体系的混合荧光增敏作用。实验条件下,荧光增敏强度满足线性加和关系的范围是:Mn~(2+)浓度0～2.9×10~(-7)mol/L;Co~(2+)浓度0～8.8×10~(-7)mol/L;总浓度不超过1.0×10~(-6)mol/L。检出限量为Mn~(2+)4.5×10~(-9)mol/L和Co~(2+)1.4×10~(-8)mol/L。实现了Mn~(2+)和Co~(2+)的连续测定。     

微色谱柱分离/ICP-AES测定环境样品中的痕量硼

本文采用色谱系统对水样品（温泉水、卤水）中的硼进行分离富集，探讨了影响其分离富集的条件。实验表明，在pH＝8条件下，硼可被树脂完全吸附，用3mL 1mol/L硫酸可以从吸附术上完全解吸硼，浓缩物用ICP－AES进行测定，所建立的方法简便、准确，适合于含盐量高及其它水样品中微量硼的测定。     

Silicate Xerogels with Dopant-Induced Chirality

A series of silicate xerogels with entrapped chiral amino acids have been obtained via sol-gel technology. The transparent, glassy samples obtained exhibit chirality in the bulk due to the presence of the entrapped asymmetric molecules. Measurements of the optical activity of the doped xerogel samples revealed that the entrapment did not significantly influence the optical activity observed for liquid solutions of the amino acids. Thus, the sol-gel method enables the preparation of amorphous optical materials exhibiting properties of strictly spatially defined molecular systems. Apart from the obvious optical applications, such porous materials with asymmetric centers might find interesting applications in chiral chemical syntheses and separations.     

Si-tolerance of iron doped Pt/alumina catalyst in the total oxidation of VOC

Summary In the present study the effects of addition of iron on the catalytic activity and Si tolerability of Pt/g-Al₂O₃in the total oxidation of volatile organic compounds were investigated. Preliminary results showed that there is a noticeable improvement effect on Si-tolerance of catalyst, particularly for short term poison exposure. Bulk analysis of deposited silicon on the catalyst surface indicated that both Pt/g-Al₂O₃and iron-doped pellets had roughly the same silicone uptakes. Deactivation of catalyst was reversible and much faster for iron doped sample. The promoting effects of iron were related to its electronegativity and, to blocking of fewer Pt sites when iron is present at the surface of the catalyst.     

一种基于形成杂多核配合物的荧光增敏效应的研究（Ⅱ）──钴（Ⅱ）－7－（8－羟基－3，6－二磺基萘偶氮）－8－羟基喹啉－5－磺酸－硼（Ⅲ）三元体系的荧光性质及其分析应用

一种基于形成杂多核配合物的荧光增敏效应的研究（Ⅱ）──钴（Ⅱ）－７－（８－羟基－３，６－二磺基萘偶氮）－８－羟基喹啉－５－磺酸－硼（Ⅲ）三元体系的荧光性质及其分析应用熊国华，刘虹，俞英，黄坚锋（九江师范专科学校化学系，九江，３３２０００）（江西大学实...     

Synthesis and Characterization of Poly-Ortho-Methylaniline With Different Degrees of Oxidation

Poly-ortho-methylanilines (POT) in three states fully oxidized, fully reduced and oxidized in varying degrees were synthesized by the reaction of common POT (C-POT) having nearly equal amounts of benzenediamine and quinonediimine units with iodine or phenylhydrazine, and the resulting polymers were characterized by IR,~(13)C-NMR, SEM and elemental analysis. The results showed that the quinonediimine unit in C-POT could be reduced by phenylhydrazine to the benzenediamine unit,forming the polymer with low OD (oxidation degree) or in a fully reduced state and that iodine-oxidation resulted in the increase of quinonediimine unit and decrease of benzenediamine unit. The solubility and flexibility of the formed polymers depend strongly on the amount of quinonediimine unit in it. It is necessary to reduce the content of quinonediimine structure unit in order to improve the solubility of aniline-class polymers.