Solubility of gases in liquids. 18. High-precision determination of Henry fugacities for argon in liquid water at 2 to 40°C

The solubility of argon in pure liquid water was measured at ca. 100 kPa and from 2 to 40°C using an analytical method characterized by an imprecision of about ±0.05%. From the experimental results, Henry fugacities H _2,1 (T,P _s,1 ) (also known as Henry's Law constants or Henry coefficients) at the vapor pressure P _s,1 of water as well as Ostwald coefficients L _2,1 at infinite dilution were obtained. Measurements were made at roughly 0.5°C and/or 1° intervals between 2 and 8°C (region I), and at 5°C intervals above 10°C (region II). A difference plot lnH _2,1 /T suggests an unusual temperature dependence in region I, i.e., between 2 and 8°C. Because of this, the data were treated separately in two parts corresponding to these two regions. Our results are compared with the recent high-precision data of Krause and Benson (Henry fugacities), and with calorimetrically determined quantities (enthalpies and heat capacities of solution). Finally, experimental results are compared with values calculated via scaled particle theory.Communicated in part at the 2^nd International Symposium on Solubility Phenomena in Newark, New Jersey, August 12–15, 1986, and at the 4^th ISSP in Troy, New York, July 20–August 3, 1990.     

COSMO-RS: A novel view to physiological solvation and partition questions

Both, dielectric continuum solvation models as well as surface or group based methods using polarity and lipophilicity parameters have been proven to be useful tools for the analysis of solvation and partition questions. For the first time, COSMO-RS provides an integrated theory, which combines the aspects of continuum solvation and surface interactions, and which ends up with chemical potentials of molecules in almost arbitrary solvents and mixtures. Due to its sound theoretical basis, COSMO-RS does not only provide a new quantitative access to solvation and partition properties in well defined solvents, but it also opens a novel view and gives a better understanding of the general problem of solvation. Finally, this allows for a generalisation of COSMO-RS to sophisticatedphysiological partition problems involving as complex phases as blood, brain, or cell membranes. The use of COSMO-RS for drug discovery and design is demonstrated by applications to blood-brain partition coefficients, and water solubility.     

Equations for calculation of the pH of buffer solutions containing sodium or potassium dihydrogen phosphate, sodium hydrogen phosphate, and sodium chloride at 25°C

Published thermodynamic data measured in aqueous mixtures of sodium or potassium dihydrogen phosphate with hydrogen phosphate and chloride at 25°C were used to test recently developed methods for calculation of the pH of phosphate buffer solutions. Equations for ionic activity coefficients are used in these methods. It is shown that all data used in the tests up to an ionic strength of about 0.5 mol-kg^-1 can be accurately predicted by the two methods recommended. In one of these methods, equations of the Hückel type are used for ionic activity coefficients and in the other equations of the Pitzer type. Several sets of phosphate buffer solutions are recommended,e.g., for calibrations of glass electrode cells. In the recommended sets, the pH of the buffer solutions can be calculated either by the Hückel or Pitzer method, and the pH predictions of these methods agree in most cases within 0.005 at least up to ionic strengths of about 0.2 mol-kg^-1. The pH values of the two primary pH standards endorsed by IUPAC based on aqueous mixtures of KH₂PO₄ and Na₂HPO₄,i.e., pH values of 6.865 and 7.413, can also be accurately predicted by the equations recommended in this study.     

Thermodynamic properties of electrolyte solutions: An EMF study of the activity coefficients of KCl in the system KCl−KNO3−H2O at 25, 35 and 45°C

Electromotive force measurements were carried out on the system KCl–KNO₃–H₂O at constant total ionic strengths of 0.5, 1.0, 2.0 and 3.0 mol-kg^–1 and at 25, 35 and 45°C using a cell consisting of a potassium ionselective electrode and a Ag/AgCl electrode. The Harned coefficients and the Pitzer binary and ternary interaction parameters for the system have been evaluated at each temperature. The osmotic coefficients, excess free energies of mixing and heats of mixing of the system have been predicted at each of the experimental temperatures and ionic strengths. The solubility data at 25°C are also interpreted.     

Measurement of diffusion coefficients in multicomponent gas mixtures by the reversed-flow technique

Summary The reversed-flow method for measurement of gas diffusion coefficients in binary mixtures is now extended to simultaneous determination of effective diffusion coefficients for each substance in a multicomponent gas mixture. The method is applied to six ternary mixtures, each consisting of two gaseous hydrocarbons and H₂, He or N₂. The results are in agreement with a limiting case of the Stefan-Maxwell equations.     

Behaviour of organic pollutants in paper and board samples intended to be in contact with food

This paper deals with the study of volatile compounds present in a set of three paper and board (P&B) samples of different composition, surface treatment, grammage and thickness. The volatile compounds released by the packaging material (P&B) can be trapped on the food and may then affect the safety and health of consumers. To evaluate if the recycled P&B could be used as food packaging material, adsorption studies have been performed with a selection of chemical substances. The adsorption isotherms are provided. Partition coefficients between paper and air have been calculated for a series of volatile compounds used as model compounds to represent different families of contaminants commonly present in P&B. Values from 4 to 3243 were obtained at different temperatures. The analysis of volatile compounds have been carried out by automatic headspace coupled on-line with GC/MS in SIM mode. The results obtained are shown and discussed.     

Diffusion coefficients from stopped-flow gas chromatography

Summary Mutual diffusion coefficients of two gases A and B can be determined in an empty gas chromatographic column by letting component B enter at an intermediate position of the column and continuously flow through a part only of it, as a carrier gas. The other component A is injected in a small amount instantaneously at the closed end of the column with the detector placed at the other end. By repeatedly stopping and then restoring after a short time the flow of B, narrow extra peaks are produced on the chromatographic elution curve, owing to diffusion of A into B. An equation is derived giving the area under the curve of each stop-peak as a function of time of the corresponding stop. Plotting the experimental data according to this equation permits the determination of the diffusion coefficient of A into B. Some results obtained by this method show negligible variations with changes in the experimental parameters.     

Insights on the origin of the structural phase transition in BaV10O15 from electronic structure calculations and the effect of Ti-doping on its structure and electrical transport properties

Band structure calculations at the level of LMTO-ASA provide insight into the electronic structure of BaV₁₀O₁₅ and the origin of the structural phase transition. A crystal orbital Hamiltonian population/integrated crystal orbital Hamiltonian population analysis provides evidence that the crystallographic phase transition is driven by V-V bond formation. As well, the energy bands near the Fermi level are very narrow, <1 eV, consistent with the fact that the observed insulating behavior can be due to electron localization via either Mott-Hubbard correlation and/or Anderson disorder. The partial solid solution, BaV_10−xTi_xO₁₅, was examined to study the effect of Ti-doping at the V sites on the structure and electronic transport properties. In spite of the non-existence of “BaTi₁₀O₁₅”, the limiting x=8, as indicated by a monotonic increase in the cell volume and systematic changes in properties. This limit may be due to the difficulty of stabilizing Ti²⁺ in this structure. For x=0.5 both the first order structural phase transition and the magnetic transition at 40 K are quenched. The samples obey the Curie-Weiss law to x=3 with nearly spin only effective moments along with θ values which range from −1090 K (x=0.5) to −1629 K (x=3). For x>3 a very large, ∼2×10⁻³ emu/mol, temperature independent (TIP) contribution dominates. Conductivity measurements on sintered, polycrystalline samples show semiconducting behavior for all compositions. Activation energies for Mott hopping derived from high temperature data range from ∼0.1 eV for x=0-1 and fall to a plateau of 0.06 eV for x=3-7. Low temperature data for x=3, 5 and 7 show evidence for Mott variable range hoping (VRH) with a T^1/4 law and in one case between 5 and 17 K, a Efros-Shklovskii correlated hopping, T^1/2 law, was seen, in sharp contrast to BaV₁₀O₁₅ where only the E-S law was observed up to 75 K. Seebeck coefficients are small (<35 μV/K), positive, roughly TIP and increase with increasing x up to x=5. This may point to a Heikes hopping of holes but a simple single carrier model is impossible. The compositions for x>3 are remarkable in that local moment behavior is lost, yet a metallic state is not reached. The failure of this system to be driven metallic even at such high doping levels is not fully understood but it seems clear that disorder induced carrier localization plays a major role.     

应用反向传播神经网络预测化合物脑血分配系数

选用27种三维结构性质描述符对脑血分配系数预测建立神经网络模型.网络模型选用典型的适合函数逼近的两层结构神经网络对脑血分配系数(lgBB,BB为脑血浓度比)进行预测,计算中采用的模型具有一个双曲正切型激活函数的隐含层和一个线性激活函数的输出层.计算表明,使用小心选择的反向传播神经网络模型对化合物脑血分配系数具有较好的预测能力.