Hydrogen transport through Pd-Ni alloy electrodeposited on Pd substrate

Hydrogen transport through a Pd-Ni alloy electrodeposited on a Pd substrate (Pd-Ni/Pd bilayer symmetric electrode) has been investigated using cyclic voltammetry and a.c. impedance spectroscopy combined with the electrochemical hydrogen permeation method. The permeation build-up current transients and the measured impedance spectra were analyzed using the time-lag method for the bilayer electrode and a complex non-linear least squares data-fitting method based upon the derived Faradaic admittance for the hydrogen absorption into and diffusion through the bilayer electrode under the permeable boundary condition, respectively. The value of the hydrogen diffusivity in the Pd-Ni layer was lower than that in the Pd layer. Furthermore, the values of the charge transfer resistance and equilibrium absorption constant for the Pd-Ni/Pd bilayer electrode were higher than those for the Pd single layer electrode. From the experimental results, the role of the thin Ni(OH)₂ film formed on the Pd-Ni layer surface in the hydrogen transport through the Pd-Ni/Pd bilayer electrode is discussed in terms of its passivating effect and extremely large hydrogen solubility. Received: 22 January 1997 / Accepted: 15 April 1997     

导数振荡与应变能极小的平面分段三次参数Hermite插值

由于分段三次参数Hermite插值的切矢往往被作为变量,故可对其进行优化以使得构造的插值曲线满足特定的要求.为了构造兼具保形性与光顺性的平面分段三次参数Hermite插值曲线,给出了一种通过同时极小化导数振荡和应变能来确定切矢的方法.首先以导数振荡函数和应变能函数为双目标建立了切矢满足的方程系统;然后证明了方程系统存在唯一解,并给出了解的具体表达式;最后给出了误差分析,并通过数值算例表明方法的有效性.结果表明,相对于导数振荡极小化方法和应变能极小化方法,所提出的导数振荡和应变能极小化方法同时兼顾了平面分段三次参数Hermite插值曲线的保形性和光顺性.     

High-resolution laser spectroscopy on H2 at 97–98 nm

A narrowband tunable eXtreme UltraViolet (XUV) laser source is used for a high resolution study of the Lyman (B ¹ _u ⁺ X ¹ _g ⁺ ) band system of molecular hydrogen. Seven rotational transitions of two vibrational bands, (10,0) and (11,0), in the wavelength range from 97.2–98.3 nm have been investigated for the first time under sub-Doppler molecular beam conditions. A calibration procedure using the I₂ standard in the visible yielded an absolute frequency accuracy of 0.02 cm^–1. The obtained H₂ transition frequencies provide a calibration standard in the extreme ultraviolet wavelength region.     

Synthesis of N-unsubstituted ketene aminals from β-ketocarboxylic esters and cyanamide

The interaction of cyanamide with -ketocarboxylic esters in the presence of Ni(acac)₂ affords N-unsubstituted aminals of acyl(alkoxycarbonyl)ketenes.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 2, pp. 419–421, February, 1993.     

Ni／γ—Al2O3,Ni／MgO,Ni／SiO2催化剂上甲烷与二氧化碳重整反应的研究

采用ＸＲＤ，ＵＶ－ＤＲＳ，ＸＰＳ，ＴＰＲ，Ｈ２－Ｏ２滴定和吡啶吸附－红外光谱等技术，研究了负载于具有不同酸碱性的γ－Ａｌ２Ｏ３，ＳｉＯ２，Ｍｇｏ载体上的镍催化剂表面物理化学性质，及其对甲烷与二氧化碳重整制取合成气反应催化活性的影响。结果表明，在上述负载型镍催化剂上，影响重整反应活性和积炭量的主要原因不是催化剂表面酸碱性，而是金属镍在催化剂表面的分散度。     

Rapid dissolution procedure for base-metals-bearing complex materials for quality control assessment

A less labour-intensive method, involving a mixture of 1.0 g MnO₂ + 20 mL HCl (11), is proposed for decomposing seven ores and six metallurgical products for accurate and precise estimation of copper, lead, zinc, cobalt and nickel for quality control assessment. Twentyone international reference materials were also analysed. Results of regression analyses are presented and intermethod comparison studies reveal that the probability of results being different compared with a reference method was less than 1%. Sample decomposition is straightforward and the method has been found to be very simple, rapid and easily adaptable, as it involves no separation of the analyte from the matrix elements.     

Simultaneous deposition of Ni nanoparticles and wires on a tubular halloysite template: A novel metallized ceramic microstructure

Tubular halloysite can be used as a template to fabricate a novel metallized ceramic microstructure through electroless plating. Reduction of Pd ions by methanol is conducted to initiate Ni plating. There is a simultaneous deposition of Ni nanoparticles on the outer surface and discontinuous wires in the lumen site of the halloysite template obtained. The different deposition could be caused by the different composition distribution of ferric oxide impurity in the wall due to the isomorphic substitution during the formation of halloysite template. Its magnetic property is mainly attributed to the Ni nanoparticles, not the wires. The metallized ceramic microstructure has the potential to be utilized as a novel magnetic material.     

液—液萃取浮选法分离Ni（Ⅱ）,Co（Ⅱ）,Fe（Ⅲ）的研究

研究了在（ＮＨ４）２ＳＯ４存在下，乙醇与水分相的条件。试验表明，丁二酮肟与镍生成的螯合物沉淀可以被萃取浮选在乙醇与水两相之间，钴与丁二酮肟生成的螯合物被乙醇萃取，Ｆｅ（Ⅲ）留在水相中，实现了同一体系中三相分离Ｎｉ（Ⅱ），Ｃｏ（Ⅱ），Ｆｅ（Ⅲ），结果满意。     

选相原位法合成立方氮化硼的关键影响因素

利用选相原位法在水溶液中成功制备出了立方氮化硼晶体，对反应条件进行了优化。结果表明，利用选相原位法合成立方氮化硼的最佳实验条件是：反应压力为10.0 MPa，在氯离子加入下利用混合氮源进行反应。在该条件下得到了纯相的立方氮化硼晶体。     

非晶态镍磷—镍钨磷双层组合镀层的耐蚀性能研究

本文对比研究了镍磷镀层、镍钨磷镀层及非晶态镍磷和镍钨磷双层组合镀层的耐蚀性能，分别进行了各种镀层的浸渍腐蚀实验，镀层的Ｘ射线衍射图象、镀层的扫描电镜图象、以及在工厂实际的腐蚀环境里进行的腐蚀实验。实验结果表明镍磷及镍钨磷双层组合镀层的耐 性优于镍磷镀层、镍钨磷镀层的耐蚀性。