K-La-Ni/Si-2催化低碳烷烃与二氧化碳重整制合成气(英文)

Ｎｉ／Ｓｉ２催化剂具有较好的低碳烷烃与二氧化碳重整制合成气的反应性能，添加Ｌａ２Ｏ３助剂和Ｋ２Ｏ助剂可提高催化剂活性和合成气收率，从而进一步改善催化剂的低碳烷烃与ＣＯ２重整制合成气的反应性能，研制的ＫＬａＮｉ／Ｓｉ２催化剂，用于天然气与ＣＯ２重整反应制合成气可达９７％的低碳烷烃转化率和９５％以上的合成气收率。     

油溶性金属Ni纳米微粒的制备与表征

纳米材料的制备、性能与应用已成为近年来的研究热点之一犤１犦。由于在催化、光学和电学材料中的广泛应用，超细单分散的金属微粒的制备与性质已引起人们的广泛兴趣。通常制备金属纳米微粒的方法有两种：一是把固体金属材料分裂为纳米尺寸的颗粒，如机械粉碎、电弧放电及金属原子蒸气沉积犤２犦，用这种方法制备的金属微粒粒径一般都比较大，且粒子尺寸分布宽，另一种是把金属原子制成纳米尺度的颗粒，如乳液聚合法犤３犦、热解犤４犦、γ－射线辐照犤５犦、脉冲电沉积犤６犦和化学还原犤７犦等，这种方法制备的微粒粒径通常分布窄且粒子小…     

Model studies of the chemisorption of hydrogen and oxygen on nickel surfaces

Atomic chemisorption of hydrogen and oxygen on the Ni(100) surface has been studied using an Effective Core Potential (ECP) approach described in a previous paper. Clusters of up to 50 nickel atoms have been used to model the surface. The computed chemisorption energies are 62 kcal/mol (exp. 63 kcal/mol) for hydrogen and 106 kcal/mol (exp. 115–130 kcal/mol) for oxygen. Correlating the adsorbate and the cluster-adsorbate bonds is extremely important for obtaining accceptable results, particularly for oxygen. Reasonable convergence of chemisorption energies is obtained with 40–50 cluster atoms for both hydrogen and oxygen. For hydrogen the addition of a third cluster layer stabilizes the results considerably. Both hydrogen and oxygen are adsorbed at (or close to) the four-fold hollow site. The calculated barriers for surface migration are also in good agreement with the experimental estimates. The calculated equilibrium heights above the surface are on the other hand too high compared with experiments. This disagreement is believed to be due to core-valence correlation effects, which are not incorporated in the present ECP. The cluster convergence for the height above the surface is much slower than for the chemisorption energy.     

(XN)4R4簇合物的结构与化学键

用密度泛函理论,在B3LYP/6-311G水平上,对(XN)4R4 (X=C,Si,Ge;R=H,CH3,NH2,OH)及合成的先驱化合物(XN)2R2进行几何构型、电子结构、振动频率和化学反应焓变等进行了研究.结果表明,(RCN)4比(CNR)4更稳定.所有簇合物的零点能EZP值,R=H时最小,R=CH3时最大,R配位原子依次为C、N和O时,EZP值逐渐减小.     

Prepared Low Stress Cubic Boron Nitride Film by Physical Vapor Deposition

We present low stress cubic boron nitride (cBN) films with a transition layer deposited on the metal alloy substrates by tuned substrate radio-frequency magnetron sputtering. The films were characterized by Fourier transform infrared spectroscopy and transmission electron microscopy (TEM). The IR peak position of cubic boron nitride at 1006.3 cm⁻¹, which is close to the stressless state, indicates that the film has very low internal stress. The TEM image shows that pure CBN phase exists on the surface of the film. Several phases of boron nitride were found at the medium implantation dose. It is believed that the transition from the low ordered phases to cBN phase occurred during implantation.     

Determination of trace elements in biological materials using tetramethylammonium hydroxide for sample preparation

A method to prepare milk powder, bovine liver and bovine muscle samples for analysis by electrothermal atomic absorption spectrometry (ETAAS) is proposed. Samples are mixed with a small amount of tetramethylammonium hydroxide (TMAH) and a stable and homogeneous slurry is produced in ca. 2 h with heating at 60–70 °C. After such sample preparation and dilution with water, trace elements are determined in certified reference materials. Pyrolysis and atomisation temperatures are optimised for each element, and several modifiers are investigated. External calibration is used for every analyte. Limits of detection (LODs), precision and accuracy are reported for Cd, Pb, Ni, Cr, Cu and Ag and compared with those obtained after conventional acid digestion. The main advantages of the proposed method are the simplicity of sample preparation and the longer lifetime of the graphite tube.     

La2O3对Ni/γ-Al2O3甲烷化催化剂的助催化作用

我国将稀土作为助剂引入镍基甲烷化催化剂,大大提高了催化剂的活性和热稳定性,并已投入工业应用［1－3］．稀土对不同镍催化剂反应性能及其作用机理的研究已有一些报导［3－7］．谢有畅等观察到镍负载在经单层La2O3改性的γ－Al2O3表面,其晶粒要比没有La2O3时小得多．Rotgerink等认为添加La后反应速率的增加不只是由于几何效应,而是La对甲烷化本身有促进作用,单位镍表面的活性是随La含量不同而改变的,活性增加的同时表观活化能也增加［5］．作为助剂的La2O3在氢还原和反应过程中的变化及其作用的研究和讨论较少,目前一般认为添…     

新型介孔分子筛KIT-1加氢脱硫催化剂的研究

制备了新型的结构排列无序的介孔分子筛KIT-1和负载Ni, Mo的KIT-1加氢脱硫催化剂。实验结果表明MoO3较易分散在KIT-1的表面,而NiO则容易在其表面形成小晶粒。与以MCM-41和NaY分子筛为载体的Ni, Mo催化剂相比, KIT-1负载催化剂具有较高的加氢脱硫催化活性,因为KIT-1载体具有相互交错的三维孔道结构, 有利于反应物和产物的扩散, 而不容易受孔道堵塞的影响。     

Study on the anodic reaction of Ni in an alkaline solution by transient pH detection based on scanning electrochemical microscopy (SECM)

The anodic reaction of Ni in an alkaline solution was studied by the tip–substrate voltammetry mode of scanning electrochemical microscopy (SECM) and cyclic voltammetry (CV). A platinum microdisc electrode was selected as the tip electrode, which functioned as a pH sensor with transient response capability. The pH value of the solution near the Ni electrode surface varied while the Ni substrate oxidation reaction occurred, and the pH variation could be detected by the tip faradic current. The cyclic voltammogram results showed that two types of hydroxides: i.e. α‐Ni(OH)₂ and β‐Ni(OH)₂ were formed during Ni oxidation in the lower potential region. In the proceedings of α‐Ni(OH)₂ → γ‐NiOOH and β‐Ni(OH)₂ → β‐NiOOH, the process of OH^? concentration decrease in the solution was ahead and behind of electron transfer in the solid phase, respectively. These results indicate that the OH^? adsorption process occurs as an elementary step in the former reaction and the H⁺ diffusion process from the inner to the outer layer of the solid phase occurs as a subsequent step in the latter reaction. The results also revealed that the oxide film on the Ni surface has a two‐layer structure. The real potential of the oxygen evolution reaction (OER) on the Ni surface with different cycles is also analyzed in the paper. Copyright © 2007 John Wiley & Sons, Ltd.