关于三次高斯和的均值

主要研究三次高斯和的均值性质，并给出一个较强的渐近公式。     

Preparation of nanosized ZnO using α brass

Nanosized ZnOs were synthesized on the surface of α brass coated a film of nickel catalyst at 500-700 °C under atmosphere of O₂ and CH₄ gases. The nanosized ZnOs have shapes including pillar, leaf, sheet and rod, which were determined by the synthesis temperature and the flow rates of O₂ and CH₄ gases. The nanosized ZnOs were characterized by electron microscopy including transmission electron microscope for crystal structure, morphology and high resolution images, both field emission scanning electron microscope and scanning electron microscope for morphology, and energy dispersive X-ray spectroscope equipped in electron microscope for chemical composition. A mechanism was proposed for the growth of nanosized ZnO obtained in this work.     

Coexisting antiferromagnetism and ferromagnetism in mechanically alloyed Fe-rich Fe–Ni alloys: implications regarding the Fe–Ni phase diagram below 400°C

Fe–Ni alloys below the Invar region with compositions Fe_100−xNi_x (x=21, 24, and 27 at%) were prepared by high-energy ball milling technique (mechanical alloying). The as-milled samples, characterized by X-ray diffraction and Mössbauer spectroscopy, contain a mixture of (BCC) and γ (FCC) phases, whereas the samples annealed at 650°C for 0.5 h show a single γ (FCC) phase displaying a single line Mössbauer spectrum at room temperature (RT). At low temperature, the Mössbauer spectra of annealed Fe₇₆Ni₂₄ and Fe₇₃Ni₂₇ alloys show the existence of a magnetically split pattern together with a broad singlet, which are ascribed to a high-moment ferromagnetic Ni-rich phase and a low-moment Fe-rich phase, respectively. The Fe-rich phase in annealed Fe₇₆Ni₂₄ alloy, which is paramagnetic at RT, undergoes antiferromagnetic ordering at 40 K, estimated from the dramatic line broadening of its spectrum, giving rise to a small hyperfine field (e.g. 2 T at 6 K). The coexistence of these phases is attributed to phase segregation occurring in these alloys as a result of enhanced atomic diffusion. The stability of these alloys towards martensitic (FCC→BCC) transformation at low temperatures is discussed in connection with the Fe–Ni phase diagram below 400°C.     

A bicontinuous structure in some systems with cubic mesophases

A cubic structure of polymer colloid complexes is studied. The technique of the research includes i) an analysis of well-known literature SAXS data; on this basis, ii) constructing a simple model to estimate geometric structure parameters and to obtain a simulated scattering curve; and iii) comparing the model with the real structure obtained from the SAXS data, using the reconstruction of electron density distribution. A bicontinuous structure in cubic mesophases is formed. Dedicated to the memory of Alexander T. Dembo     

Medium-range structural order in liquid Ni20Al80 alloy: Experimental and molecular dynamics studies

In this Letter, structural properties of liquid Ni₂₀Al₈₀ have been studied through molecular dynamics (MD) simulations, and results agree well with X-ray experiments. The prepeak in the structure factor manifests the existence of medium-range structural order (MRSO) in liquid Ni₂₀Al₈₀. Analyses in MRSO reveal the dominance of ideal icosahedra and defective icosahedra which, furthermore, form clusters and share common atoms.     

Theoretical investigation of Mössbauer hyperfine interactions in ordered FeNi and disordered Fe–Ni alloys

Electronic structure spin-polarized calculations were performed for 79-atoms embedded clusters representing the ordered intermetallic compound FeNi, the fcc Fe-rich disordered alloy Fe₈₅Ni₁₅ in an antiferromagnetic (AFM) configuration, and the ferromagnetic (FM) disordered alloy Fe₅₀Ni₅₀. The spin-polarized discrete variational method (DVM) in Density Functional theory was employed. Spin magnetic moments, as well as the ⁵⁷Fe Mössbauer hyperfine parameters isomer shift and magnetic hyperfine fields, were obtained from the calculations. For FM Fe₅₀Ni₅₀, the effect of pressure on the hyperfine field and on the isomer shift was investigated, for three different local atomic configurations surrounding the ⁵⁷Fe probe atom. In the case of the isomer shift, the calculated values were compared to reported experimental data.     

Behaviors of the positive temperature coefficient of resistance of poly(styrene‐co‐n‐butylacrylate) filled with Ni‐plated core‐shell polymeric particles

Conductive composite films of poly(styrene‐co‐n‐butylacrylate) copolymers filled with low‐density, Ni‐plated core‐shell polymeric particles were prepared and their behaviors of positive temperature coefficient of resistance (PTCR) were investigated. When the conductive fillers in the composite film were loaded beyond the critical volume, 10 up to 25 vol %, composite films exhibited a unique electrical resistant transition behavior, which the electrical resistance rapidly increased by several orders of magnitude at the critical temperature. The PTCR transition temperature, in general, occurred before the glass transition temperature of polymer matrix. Further increased the conductive filler loading to 30 vol %, the overpacked conduction paths were formed in the entire composite and the PTCR effects became blurred. While the composite film treated with thermal cycle several times from room temperature up to 120 °C, the electrical resistivity increased accompanied with the shift of the PTCR transition to lower temperature. The reason might have been caused by the formed interfacial cracks within the composite film. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 322–329, 2007     

Spline Techniques for Solving Singularly-Perturbed Nonlinear Problems on Nonuniform Grids

A numerical method based on cubic splines with nonuniform grid is given for singularly-perturbed nonlinear two-point boundary-value problems. The original nonlinear equation is linearized using quasilinearization. Difference schemes are derived for the linear case using a variable-mesh cubic spline and are used to solve each linear equation obtained via quasilinearization. Second-order uniform convergence is achieved. Numerical examples are given in support of the theoretical results.     

Finite-Type Invariants of Cubic Complexes

The paper is for a general audience and may serve as a preliminary introduction to the theory of finite-type invariants.     

Influence of boric acid on the electrochemical deposition of Ni

The electrolytic deposition of Ni onto a paraffin-impregnated graphite electrode from supporting chloride electrolyte (0.5 mol dm⁻³ NaCl) adjusted to the required pH using dilute HCl is investigated. The effect of electrolyte composition on the Ni electrodeposition is studied using linear sweep voltammetry in the cathodic region. An elimination voltammetry procedure was applied to evaluate the polarization curves. The aim of this work was to deduce the mechanism of Ni reduction in the chloride bath as well as the influence of boric acid on this. Positively-charged NiCl⁺ ions were found to be the electroactive particles in the Ni reduction mechanism. The strong competition between the NiCl⁺, Cl⁻ and H⁺ ions for active sites at the electrode is discussed. Kinetically-controlled adsorption/desorption processes of various species were also confirmed using elimination voltammetry with a linear scan. The evolution of gaseous hydrogen, catalyzed by the freshly-deposited Ni, accompanies the electrodeposition process. The presence of boric acid at a sufficiently high concentration inhibits the deposition of Ni and, at the same time, improves the morphology and brightness, as well as the adhesion of the deposited Ni. Elimination voltammetry with a linear scan is an efficient way to evaluate current–potential curves that reflect the electrodeposition of one-component Ni coatings. By eliminating selected currents, additional interesting and useful information can be obtained from voltammetric data.