Immobilization of α-amylase in vinyl-polymer-based interpenetrating polymer networks

Semi-interpenetrating polymer networks (IPNs) of poly(ethylene glycol), poly(vinyl alcohol) and polyacrylamide were prepared as a support for enzyme immobilization and kinetic studies were performed for the immobilization of -amylase. The effect of IPN composition on the extent of immobilization was investigated and the percentage of relative activity of the immobilized enzyme was evaluated as a function of the chemical architecture of the IPNs, pH and temperature, taking starch as a substrate. The kinetic constants and the maximum reaction velocity were also evaluated. The IPNs were characterized by IR spectral analysis.     

从溶胀平衡研究玻璃态高聚物的凝聚缠结网络

在13~15℃室温条件下对聚苯乙烯(PS)颗粒在二氧六环/水混合溶剂中的溶胀情况进行目视观察,可以看到,当减小混合溶剂二氧六环/水中的水含量时,PS颗粒从玻璃态到溶胀的玻璃态、溶胀的高弹态、流体态的转变,与PS颗粒升温时从玻璃态到高弹态、流体态的转变相对应.选定混合溶剂二氧六环/水(水6·8wt%)对一个单分散PS试样(Mw=1·68×105)在30℃进行分相平衡和溶胀平衡的测定.分相平衡是先将PS/二氧六环/水(混合溶剂水含量6·8wt%)体系加热到130℃使PS溶解成一均相溶液,然后在冷却过程中分相,在30℃达分相平衡(30天)时,浓相高分子体积浓度p″=0·304,稀相几乎为纯溶剂.从Flory-Huggins相平衡理论得出此体系的高分子-溶剂相互作用参数χ=0·63.本工作使用的单分散PS试样在选定的混合溶剂,即二氧六环/水(水6·8wt%)中,30℃时不能溶解只能溶胀,单分散PS颗粒淬冷试样(密度ρp=1·0451g/mL)到达溶胀平衡(80天)时浓相高分子体积浓度p″=0·308.而此淬冷试样经在80℃热处理100h后的老化试样(ρp=1·0470g/mL)达溶胀平衡(70天)时p″=0·312.从溶胀过程中浓相体积变化曲线可知试样经在80℃热处理过程中凝聚网络趋向于更均一,更接近热处理温度下的平衡态,试样密度增大,网络产生了新的链间凝聚,物理交联密度增大(凝聚点间分子量减小).从溶胀平衡理论并取χ=0·63(分相平衡)可得到淬冷试样的物理交联点间分子量Mc=11·6×104,老化试样的物理交联点间分子量Mc=6·9×104.实验结果说明溶胀过程及溶胀平衡的测定可以反映玻璃态高聚物中的凝聚网络结构的细节,而且非常敏感.     

{[Cu4(nip)4(4，4′-bipy)4(DMF)4]·CH3OH}n配合物的合成与晶体结构

A coordination polymer, {[Cu₄(nip)₄(4，4′-bipy)₄(DMF)₄]·CH₃OH}_n, have been synthesized by the layer method using 5-nitroisophthalic acid (H₂nip), Cu(CH₃COOH)₂ and 4,4′-bipyridine(4,4′-bipy) with three solutions in a marrow tube and structurally characterized by X-ray single-crystal structure analysis. The results indicated that the nip ligand has a μ₂ mono-atomic bridging-monodentate coordination mode and the structure is a two-dimensional network. CCDC: 623420.     

As, Bi, Sb and Sn determination in atmospheric particulate matter by direct solid sampling-hydride generation-electrothermal atomic absorption spectrometry

A novel, rapid and simple method by hydride generation-electrothermal atomic absorption spectrometry (HG-ETAAS) after direct As, Bi, Sb and Sn hydrides generation from untreated filters of atmospheric particulate matter (PM₁₀ and PM_2.5) was optimised. PM₁₀ and PM_2.5 were not subjected to any pre-treatment: circular portions between 0.28 and 6.28 cm² were directly placed into the reaction vessel of a batch mode generation system. A 2⁸ × 3/64 Plackett–Burman design was used as a multivariate strategy for the evaluation of the effects of several variables affecting the hydride generation, trapping and atomisation efficiencies. Trapping temperature was the most statistically significant variable for As, Bi and Sn. Atomisation temperature was also statistically significant for Sb determination. Optimum values of significant variables were selected by using univariate optimisation approaches. An aqueous calibration method was used throughout. The developed method has been found to be precise with relative standard deviations of 6.2, 5.3, 9.1 and 7.5% for 11 determinations in a filter sample containing 0.7, 1.0, 1.4 and 1.7 μg l⁻¹ for As, Bi, Sb and Sn, respectively. Results obtained by direct solid sampling-HG-ETAAS have been found statistically comparable with those obtained after conventional method based on an acid digestion followed to ICP-MS. Absolute detection limits were 37, 15, 30, and 41 ng l⁻¹ for As, Bi, Sb and Sn, respectively. Detection limits referred to the air volume sampled (in the range of 0.020–0.050 ng m⁻³) were low enough for the determination of several hydride-forming elements from PM₁₀ and PM_2.5 samples collected in a non-polluted suburban area of A Coruña (NW Spain).     

The existence of sensitive optimal policies in two multi-dimensional queueing models

Recently Dekker and Hordijk [3,4] introduced conditions for the existence of deterministic Blackwell optimal policies in denumerable Markov decision chains with unbounded rewards. These conditions include- uniform geometric recurrence.The-uniform geometric recurrence property also implies the existence of average optimal policies, a solution to the average optimality equation with explicit formula's and convergence of the value iteration algorithm for average rewards. For this reason, the verification of-uniform geometric convergence is also useful in cases where average and-discounted rewards are considered.On the other hand,-uniform geometric recurrence is a heavy condition on the Markov decision chain structure for negative dynamic programming problems. The verification of-uniform geometric recurrence for the Markov chain induced by some deterministic policy together with results by Sennott [14] yields the existence of a deterministic policy that minimizes the expected average cost for non-negative immediate cost functions.In this paper-uniform geometric recurrence will be proved for two queueing models: theK competing queues and the two centre open Jackson network with control of the service rates.The research of the author is supported by the Netherlands Organization for Scientific Research N.W.O.     

Synthesis and Crystal Structure of 2-Chloromethyl-1H-benzimidazole Nitrate, [ClCH_2(C_7H_6N_2)]NO_3

1 INTRODUCTION Benzimidazole is an interesting heterocyclic compound because it is found in various naturally occurring drugs, such as omeprazole, astemizole and emedastine difumarate[1]. The efficacy of sub- stituted benzimidazoles in the treatment of parasitic infections is well known[2～4]. Substituted benzimid- azole moieties are established pharmacophores in parasitic chemotherapy. Bis(2-benzimidazole) and some substituted bis(benzimidazol-2-yl)alkanes have attracted much interest …     

Preparation of novel,high‐modulus,swollen‐ or jungle‐gym‐type polyimide gels end‐crosslinked with 1,3,5‐tris(4‐aminophenyl)benzene

A novel preparation approach for high‐performance polyimide gels that are swollen or have a jungle‐gym‐type structure is proposed. A new rigid and symmetric trifunctional amine, 1,3,5‐tris(4‐aminophenyl)benzene (TAPB), was synthesized as a crosslinker. Three different kinds of amic acid oligomers derived from pyromellitic dianhydride (PMDA), 4,4′‐oxydiphthalic anhydride (ODPA), p‐phenylenediamine (PDA), and 4,4′‐oxydianiline (ODA) were end‐crosslinked with TAPB at a high temperature to make polyimide networks with different structures. Transparent polyimide gels were obtained from the ODPA–ODA/TAPB series with high compression moduli of about 1 MPa at their equilibrium swollen states in N‐methylpyrrolidone. Microscopic phase separation occurred during the gelation–imidization process when polyimide networks were generated from PMDA–PDA/TAPB and PMDA–ODA/TAPB. After these opaque polyimide networks were dried, a jungle‐gym‐like structure was obtained for the PMDA–PDA/TAPB and PMDA–ODA/TAPB series; that is, there was a high void content inside the networks (up to 70%) and little volume shrinkage. These polyimide networks did not expand but absorbed the solvent and showed moduli as high as those of solids. Therefore, using the highly rigid crosslinker TAPB combined with the flexible monomers ODPA and ODA and the rigid monomers PMDA and PDA, we prepared swollen, high‐performance polyimide gels and jungle‐gym‐type polyimide networks, respectively. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 2501–2512, 2002     

A Calculation Method of Passenger Flow Distribution in Large-Scale Subway Network Based on Passenger–Train Matching Probability

The ever-increasing travel demand has brought great challenges to the organization, operation, and management of the subway system. An accurate estimation of passenger flow distribution can help subway operators design corresponding operation plans and strategies scientifically. Although some literature has studied the problem of passenger flow distribution by analyzing the passengers’ path choice behaviors based on AFC (automated fare collection) data, few studies focus on the passenger flow distribution while considering the passenger–train matching probability, which is the key problem of passenger flow distribution. Specifically, the existing methods have not been applied to practical large-scale subway networks due to the computational complexity. To fill this research gap, this paper analyzes the relationship between passenger travel behavior and train operation in the space and time dimension and formulates the passenger–train matching probability by using multi-source data including AFC, train timetables, and network topology. Then, a reverse derivation method, which can reduce the scale of possible train combinations for passengers, is proposed to improve the computational efficiency. Simultaneously, an estimation method of passenger flow distribution is presented based on the passenger–train matching probability. Finally, two sets of experiments, including an accuracy verification experiment based on synthetic data and a comparison experiment based on real data from the Beijing subway, are conducted to verify the effectiveness of the proposed method. The calculation results show that the proposed method has a good accuracy and computational efficiency for a large-scale subway network.     

基于人工神经网络研究芳胺喹唑啉衍生物的抗胃癌活性

基于分子电性距离矢量(M1)表征21个芳胺喹唑啉衍生物的分子结构,并与其对人胃癌细胞的抗癌活性(pI)关联.通过最佳变量子集回归方法建立上述化合物抗胃癌活性的三参数(M15、M18、M82)定量构效关系模型.其交叉验证系数(R2cv)、非交叉验证系数(R2)依次为0.386和0.737.通过R、R2cv.、VIF等检验...     

主成分分析-支持向量机用于肝病分类模型

将主成分分析(PCA)用于肝功能检测数据特征提取,然后用支持向量机(SVM)对乙肝、丙肝、肝硬化、正常人样本建立分类模型。采用高斯径向基函数(RBF)为核函数,调节核函数参数C及σ以建立最佳支持向量机模型。该模型对训练集的识别率为99.3%,对预测集的预测率为96.4%。结果表明:PCA-SVM法建立的肝病分类模型能较好的区分乙肝、丙肝、肝硬化及正常人,且分类效果优于传统支持向量机及人工神经网络(ANN)分类模型。