Short Communication: Application of WENO (Weighted Essentially Non-oscillatory) Approach to Navier–Stokes Computations

The direct implementation of the essentially non-oscillatory schemes for flow simulation over complex geometries sometimes results in insufficiently robust numerical algorithms. In order to overcome this difficulty, it is suggested to use the weighted essentially non-oscillatory approach for multidimensional Navier–Stokes computations. The results indicate a significant improvement in accuracy and robustness, especially for low Mach and high supersonic flows.     

Numerical study on combustion of H2—O2 in a supersonic reactive expansion in a nozzle

A study on expansion flow inside a nozzle considering full mechanism chemistry of hydrogen and oxygen was carried out. In this study, a full implicit scheme for turbulent reactive flow was obtained by combining the second order TVD scheme of Yee and Harten (1987, Implicit TVD schemes for hyperbolic conservation laws in curvilinear coordinates. American Institute of Aeronautics and Astronautics Journal, 25(2), 266–274) with the efficient implicit lower-upper scheme of Shuen and Yoon (1989, Numerical study of chemically reacting flows using a lower-upper symmetric successive overrelaxation scheme. American Institute of Aeronautics and Astronautics Journal, 27(12), 1752–1756). The species equations, Navier–Stokes equations and turbulence model were implemented in the numerical scheme and solved in conjunction with full detailed finite rate chemistry. The numerical scheme is verified by comparison with experimental results of a converging–diverging nozzle. Effects of inlet pressure, temperature and fuel-oxidant mass ratio on nozzle flow field were studied. Variation of chemical species under different conditions was investigated by considering a chemical mechanism. Results show that increasing inlet pressure increases the rate of reactions due to increasing the concentration of reactants. For lower inlet pressure the radical H increases slightly in the diverging part of the nozzle, while for higher pressures it decreases along the nozzle. Inlet fuel–oxidant mass ratio affects the variation of all species with a greater effect for a near stoichiometric ratio. It was also shown that a higher inlet temperature provides a more enhanced reaction zone in the diverging part of the nozzle.     

DARBOUX POLYNOMIALS FOR LOTKA–VOLTERRA SYSTEMS IN THREE DIMENSIONS

We consider Lotka–Volterra systems in three dimensions depending on three real parameters. By using elementary algebraic methods we classify the Darboux polynomials (also known as second integrals) for such systems for various values of the parameters, and give the explicit form of the corresponding cofactors. More precisely, we show that a Darboux polynomial of degree greater than one is reducible. In fact, it is a product of linear Darboux polynomials and first integrals.     

Dislocation driven chromium precipitation in Fe-9Cr binary alloy: a positron lifetime study

The influence of initial heat treatment on anomalous Cr precipitation within high temperature solubility region of the Fe–9Cr alloy has been investigated using positron lifetime studies. Air-quenched samples with pre-existing dislocations exhibited a distinct annealing stage in positron lifetime between 800 and 1100?K corresponding to Cr-precipitation. During this stage, Transmission Electron Microscopy showed fine precipitates of average size 4 nm, dispersed throughout the sample and from Energy-dispersive X-ray spectroscopy (EDS) analysis they are found to be Cr-enriched. The presence of dislocations is found to be responsible for Cr precipitation.     

Densities and viscosities of propylene carbonate with aromatic hydrocarbons (benzene, 1,4-dimethylbenzene and ethylbenzene) at 288.15, 298.15 and 308.15 K

Densities and viscosities of the binary mixtures of propylene carbonate with benzene, 1,4-dimethylbenzene and ethylbenzene were measured over the entire mole fraction range at 288.15, 298.15 and 308.15?K. Using the experimental values of densities and viscosities the excess molar volumes and viscosity deviations were calculated. The results were fitted by Redlich–Kister equation. The results were discussed in terms of intermolecular interactions.     

Design and synthesis of novel indoline-(thio)urea hybrids

Abstract

A series of novel indoline-(thio)urea were designed and prepared using indoline(s) as a new platform and tested as organocatalysts in the Michael and Morita–Baylis–Hillman reactions. Most of the compounds were found to be very active catalysts although they did not promote the enantioselectivity. As agents for the conversion of thiocarbonyl compounds into carbonyl compounds, potentials of PIFA and DDQ were also displayed. Furthermore, DFT calculations rationalized the experimentally observed non-enantioselectivity of the catalysts.     

Effect of calcination temperature on the structure of vanadium phosphorus oxide materials and their catalytic activity in the decomposition of 2-propanol

The synthesis of vanadyl phosphate by reaction of an alcoholic solution of V₂O₅ and o-H₃PO₄ has been studied. The solids obtained were investigated by various physico-chemical techniques as in situ X-ray diffraction (XRD), thermogravimetric analysis (TGA), and differential thermal analysis (DTA) under inert atmosphere. The compounds have been further characterized by infrared and UV–Visible spectroscopies. The isopropanol conversion is carried out to evaluate the catalytic activity of the samples. The isopropanol conversion increases with the reaction temperature from 433 to 503 K for vanadyl phosphorus oxides calcined at a different temperature. However, the conversion attains 100% at 503 K, and the solid calcined at 973 K exhibits high selectivity towards propene (100% at 503 K).     

Use of a Tensammetric Wave for the End-Point Detection in Chelatometry

Abstract

A new method for the end-point detection in complexometric titration using a tensammetric wave of organic reagents such as oxine and alizarin complexone (ALC) was studied. The tensammetric wave of these reagents disappears by their chelate formation and reappears by the liberation of free indicator during the exchange reaction between indicator chelate and EDTA. This mechanism is utilized for the end-point detection in complexometric titration of metals. Since the sensitivity of tensammetric wave is extremely high, very sharp end-point can be obtained for the titration of metals even in the concentration of 10^?5M.     

Syntheses and molecular structures of four inorganic–organic hybrid compounds from N-containing aromatic bases and perchlorometallates of Zn,Cu, Sn,and Fe

Four organic–inorganic crystals, [(HL1)₂(ZnCl₄)]·H₂O (1) (L1?=?2-methylquinoline), [(HL1)₂(CuCl₄)] (2), [(HL2)₂SnCl₆] (3) (L2?=?6-bromobenzo[d]thiazol-2-amine), and [(HL3)FeCl₄] (4) (L3?=?5,7-dimethyl-1,8-naphthyridine-2-amine), derived from N-containing aromatic Brønsted bases and metal(II) chlorides (zinc(II) chloride, copper(II) chloride dihydrate, tin(II) chloride dihydrate, and iron(III) chloride hexahydrate) were prepared at room temperature and characterized by IR, X-ray structure analysis, elemental analysis, and TG analysis. The crystals are built up by perchlorometallates (Zn, Cu, Sn, and Fe) associated with organic cations through multiple non-covalent associations. X-ray diffraction analysis reveals that 1 and 2 have 3-D network structures built from hydrogen bonds between the cations and chlorometallates. Water molecules play an important role in structure extension in 1. Anhydrous 3 and 4 produced from 2-aminoheterocyclic derivatives display 2-D sheet structures. Arrangements of anions and cations are dominated by shape and size of cations, and also by the different structures of the chlorometallates as well as non-bonding interactions in the crystal structures. Except for 1, the other compounds are thermally stable below 240°C.     

Liquid–liquid extraction of copper(II) with substituted salicylideneanilines from sulfate media

The liquid–liquid extraction of copper(II) with Schiff bases in chloroform from sulfate media is studied for pH and concentration of the extractant. Stoichiometry coefficients of the extracted species are determined by the slope analysis method. With salicylideneaniline, the copper(II) is extracted as a mixed chelate complex, CuL₂HL. In the presence of substituent, the copper is extracted as simple chelates, CuL₂. The trends in the values of extraction constants were explained in terms of the nature of the substituents.