Physical,Thermal and Biological Properties of Yellow Dyes with Two Azodiphenylether Groups of Anthracene

Two yellow bis-azo dyes containing anthracene and two azodiphenylether groups (BPA and BTA) were prepared, and an extensive investigation of their physical, thermal and biological properties was carried out. The chemical structure was confirmed by the FTIR spectra, while from the UV–Vis spectra, the quantum efficiency of the laser fluorescence at the 476.5 nm was determined to be 0.33 (BPA) and 0.50 (BTA). The possible transitions between the energy levels of the electrons of the chemical elements were established, identifying the energies and the electronic configurations of the levels of transition. Both crystals are anisotropic, the optical phenomenon of double refraction of polarized light (birefringence) taking place. Images of maximum illumination and extinction were recorded when the crystals of the bis-azo compounds rotated by 90° each, which confirms their birefringence. A morphologic study of the thin films deposited onto glass surfaces was performed, proving the good adhesion of both dyes. By thermal analysis and calorimetry, the melting temperatures were determined (~224–225 °C for both of them), as well as their decomposition pathways and thermal effects (enthalpy variations during undergoing processes); thus, good thermal stability was exhibited. The interaction of the two compounds with collagen in the suede was studied, as well as their antioxidant activity, advocating for good chemical stability and potential to be safely used as coloring agents in the food industry.     

Synthesis and application of a novel solid-phase microextraction adsorbent: Hollow fiber supported carbon nanotube reinforced sol–gel for determination of phenobarbital

A novel solid-phase microextraction technique using a hollow fiber-supported sol–gel combined with multi-walled carbon nanotubes was employed in the determination of phenobarbital in wastewater. In this new technique, a silica-based, organic–inorganic polymer containing functionalized multi-walled carbon nanotubes (MWCNTs) was prepared with sol–gel technology via the reaction of tetraethylorthosilicate (TEOS) with an acidic catalyst (HCl). This sol was injected into a polypropylene hollow fiber segment for in situ gelation. This device operated in direct immersion sampling mode. The experimental setup is simple and affordable, and the device is disposable, so there is no risk of cross-contamination or carry-over. Parameters affecting extraction such as pH of the aqueous solution, ageing and extraction times, aqueous sample volume, agitation speed and carbon nanotube amount were optimized. Linearity was observed over a range of 0.50–5000 ng mL⁻¹, with an estimation coefficient (r²) higher than 0.982. The limit of detection (LOD) was 0.32 ng mL⁻¹ (n = 5), and repeatability (RSD% = 2.9) was from the average of three levels of analyte concentrations (1, 1000 and 4500 ng mL⁻¹) with three replicates for each within a single day. Finally, a pre-concentration factor of 2100 was obtained for phenobarbital.     

The effect of fiber coating on the tensile properties of ionomer-based composites

Asbestos fibers, of the chrysotile variety, were coated with a thin polyamide film by an in situ polycondensation technique. Ionomer-based composites were prepared containing the so-modified asbestos fibers in a random in-plane orientation; results of testing the tensile properties of these asbestos/polyamide/ionomer composites are presented. Parameters investigated comprise the asbestos content in the composite and the polyamide content deposited on asbestos. A significant improvement in the tensile performance was established, especially at the intermediate polyamide content of 3.4 phr. The behavior is discussed in terms of possible interactions between the phases present in the composite material.     

Preparation and Antibacterial Function of Quaternary Ammonium Salts Grafted Cellulose Fiber Initiated by Fe2 +-H2O2 Redox

The surface contact disinfecting technique is a newly developed method for water sterilization. In this paper, the grafted quaternary ammonium salts (QAS) antibacterial fibers were prepared and designed to apply for the surface contact disinfecting process in water treatment. The antibacterial fibers were directly prepared by grafting methacryloxylethyl benzyl dimethyl ammonium chloride (DMAE-BC) onto cellulose fiber using thiocarbonate-H₂O₂ redox system. All kinds of factors in the grafting reactions, such as reaction time, reaction temperature, monomer concentration, initiator concentration, which influence the percentage of grafting, were studied and optimized. The modified cellulose fibers were characterized by Fourier transform infrared spectroscopy (FTIR) and scanning electron microscope(SEM). The effects of the percentage of grafting of the grafted cellulose fibers on bactericidal activity were also studied. The spread plate method was used to characterize the bactericidal activity. The disinfection process was further investigated by directly observing the morphology of the bacterial cells adsorbed on the antibacterial fibers with SEM and measuring extracelluar total protein concentration in suspension. The poly(DMAE-BC)-grafted cellulose ?ber was found to exhibit particularly high activity against E.coli.     

Optical Properties and Photo‐Oxidation of Tetraphenylethene‐Based Fluorophores

We report the optical properties of tetraphenylethene (TPE) and other TPE derivatives functionalised with an octyl group (TPE‐OCT) and polyethyleneglycol group (TPE‐PEG) in the side chain. We compared TPE‐OCT and TPE‐PEG with TPE in both organic solvents and under aqueous conditions. All materials exhibit aggregation‐induced emission, however, uncommonly, TPE‐PEG seems to aggregate in aqueous solution with enhanced photoluminescence quantum efficiency (PLQE) relative to that in organic solvents. All three materials can be photo‐oxidised in solution to their diphenylphenanthrene derivative by irradiation with UV light (at both ≈1 and ≈5 mW cm^?2), with a subsequent enhancement in PL efficiency. The electron‐donating ether group increases the rate of oxidation relative to bare TPE and also photo‐oxidation was shown to be solvent and concentration dependent. Finally, photo‐oxidation was also demonstrated in the aggregate state.     

SYNTHESIS AND CONFORMATIONAL STUDIES OF A NUMBER OF SATURATED BICYCLIC SIX-MEMBERED RING PHOSPHITES

Abstract

An ¹H NMR study of the conformation of the dioxaphosphorinane ring of a number of diastereoisomeric bicyclic saturated six-membered ring phosphites (3ab-10ab) has been performed. The dioxaphosphorinane ring of these phosphites is transannelated with a tetrahydrofuran, cyclopen-tane, tetrahydropyran or cyclohexane ring. The substituent on the phosphorus atom is a methoxy or phenoxy group. It is shown that the cis isomers 3a-10a prefer a chair conformation of the dioxaphosphorinane ring, independent of the substituent on the phosphorus atom and of the nature of the transannelated ring. In contrast, for the trans isomers 3b-10b a twist rather than a chair conformation of the dioxaphosphorinane ring is preferred. The fraction of the twist conformer in the trans isomers is mainly determined by the substituent on phosphorus. The size and composition of the transannelated ring are relatively unimportant in this respect. For both cis and trans isomers the preferred geometry is solvent-independent. The measured ^3JPOCH couplings of the cis isomers 3a-10a are used to formulate an expression for the dependence of such couplings upon dihedral angles in bicyclic phosphites.     

卡拉胶纤维的阻燃性能

以钡盐为凝固浴, 经湿法纺丝技术获得卡拉胶纤维(CAF). 通过极限氧指数(LOI)、 锥型量热(Cone)、 扫描电子显微镜(SEM)、 元素分析(EDS)、 X射线衍射(XRD)、 热重红外(TG-FTIR)同步差示扫描量热(DSC)法、 热裂解(Py)和气相色谱-质谱法(GC-MS)对CAF进行表征. 结果表明, CAF极限氧指数高达50以上, 锥型量热过程中, CAF一直保持红热状态, 没有产生火苗, 其热释放速率及总释放热等参数均较低, 与海藻酸钙纤维(ALF)和琼胶纤维(AGF)相比, CAF具有较好的阻燃性. 可能机理为卡拉胶分子的硫酸酯基和渗入纤维内部的钡离子发生络合作用, 并促进交联成炭和改变纤维裂解过程. 裂解过程中产生的磺酰自由基与燃烧产生的氢氧自由基迅速结合, 终止燃烧反应. 同时, CAF在燃烧过程中产生大量残炭, 并形成致密的钡盐结构层和中空的纤维结构, 成为CAF阻燃的另一重要因素.     

Solid-state pH nanoelectrode based on polyaniline thin film electrodeposited onto ion-beam etched carbon fiber

An ultramicro pH sensor has been constructed based on a thin polyaniline film that was electrochemically deposited onto a carbon fiber nanometer-size electrode. The substrate nanoelectrodes were fabricated using ion-beam conically etched carbon fibers with tip diameters ranging ca. from 100 to 500 nm. The polyaniline film was deposited from HCl solution containing the aniline monomer by cycling the potential between −0.2 and +1.0 V. The electromotive force (emf) signal between the pH sensitive polyaniline-coated nanoelectrode and an Ag/AgCl reference electrode was linear over the pH range of 2.0-12.5 with a slightly super-Nernstian slope of ca. −60 mV/pH unit. Response times ranged from several sec at pHs around 7 up to 2 min at pH 12.5. The proposed pH nanoelectrode displayed high ion selectivity with respect to K⁺, Na⁺, Ca²⁺, and Li⁺, with log K_H,M values around −12 and has a working lifetime of about 20 days. Key parameters important for the pH nanoelectrode performance, including polyaniline film preparation, selectivity, response time, temperature dependence, relative coating thickness, stability, and reproducibility, have been characterized and optimized. The performance of the pH nanoelectrode was examined by measuring the pH of several real samples including body fluids (serum, urine) and low ionic strength water samples (rain, deionized and tap water). The results agreed very well with those obtained by using commercial glass pH electrodes. The proposed pH nanoelectrode demonstrated attractive properties and seems particularly promising for use under physiological conditions.     

Nonlinear Optical Properties of Tri—nuclear Transition Metal Clusters M—（μ—S）s—M′（M=Mo,W;M′=Cu,Ag,Au）

The static polarizabilities and the second-order hyperpolarizabilities of a series of tri-nuclear metal cluster models MS4(M′PPh3)2(M′PPh3)(M=Mo,W;M′=Cu,Ag,Au)have been calculated within the first-principle theoretical framework. The model clusters have two fragments of rhombic units and it is the charge ransfer from one of these moieties to the other that is responsible for nonlinear optical property. This kind of electronic delocaization, differentiated from that of planar π-system, is very interesting and is worthy for further investigation.     

Dependence of electronic and optical properties of multilayer SiC and GeC on stacking sequence and external electric field

The electronic and optical properties of different stacked multilayer SiC and GeC are investigated with and without external electric field (EEF). The band gaps of multilayer SiC and GeC are found smaller than that of monolayer SiC and GeC due to the interlayer coupling effect. When EEF is applied, the direct band gaps (ΔK–M) of multilayer SiC and direct band gaps (ΔK–K) of multilayer GeC all turn to indirect band gaps (ΔK–G) as the band at the G point drops dramatically toward zero. The imaginary part ε₂(ω)s of multilayer SiC and GeC show that new absorption peaks between 2–5 eV appear when the polarized direction is perpendicular to the layer plane, and new absorption peaks in infrared region appear as the EEF is higher than a certain point when the polarized direction is parallel to the layer plane. Our calculations reveal that different stacking sequences and EEF can provide a wide tunable band structures and optical properties for multilayer SiC and GeC.