远距离三原子量子纠缠特性与其应用

三原子分别被束缚在用光纤环形连接单侧泄漏微光学腔场中,在微腔中输入激光驱动场和施加局域激光场,利用输入-输出技术及绝热近似理论,推导出一维Ising链模型的有效哈密顿量,该哈密顿量表明该系统会诱导出三原子中的任意两原子纠缠及三原子纠缠,用伴随数(concurrence)度量两原子纠缠,用内禀纠缠度量三原子纠缠,通过数值计算,给出两原子和三原子纠缠随时间演化曲线,通过适当调控激光驱动场和局域激光场,在远距离三原子中任意两原子实现未知量子态的隐形传送。     

铜氧化物高温超导体正常态反常光电导性质的研究

在全电荷自旋重组的模型下,计算了铜氧化物高温超导体正常态的光电导性质,发现在欠掺杂和最佳掺杂区,铜氧化物高温超导体正常态的光电导谱由低能端的non-Drude峰和较高能量处的中红外带两部分组成,低能峰和中红外带之间存在电荷转移能隙.随着掺杂量的增加,中红外带不断移向低能峰,最后在极过掺杂时完全融入低能峰,光电导谱恢复为Drude形式.全电荷自旋重组模型下的自能体现了部分关联效应,包含了赝能隙的信息,被认为造成了光电导的反常特性.     

钙钛矿/硅异质结叠层太阳电池:光学模拟的研究进展

近几年,钙钛矿/硅异质结叠层太阳电池发展迅速,效率已经从13.7％提升到29.1％.由于叠层电池器件的制作工艺复杂,而叠层太阳电池中的光学损失对转换效率的影响很大,所以通过光学模拟进而获得高效电池至关重要.本文首先从商业软件和自建模型两方面概述了光学模拟的方法,接着从反射损失和寄生吸收两方面针对光学模拟研究进展进行了总...     

主三镜一体化离轴三反光学天线设计

为提高空间激光通信离轴三反光学天线的装调效率,需要对反射镜总的装调自由度进行优化设计。基于共轴三反无焦系统的设计原理,提出一种主三镜一体化的设计方法,并推导了光学系统结构参数之间的关系,利用Zemax光学软件设计了一种结构紧凑、主三镜一体化的离轴三反光学天线。设计结果表明:全视场光学像质优于衍射极限,主镜和三镜空间位置相接近,可共母板加工和面形共基准检测,为主三镜的一体化加工提供了方法。光学天线的装调自由度减少了6个,降低了装调难度,提高了装调效率。     

Spectral polarization-encoding of broadband laser pulses by optical rotatory dispersion and its applications in spectral manipulation

We propose a kind of spectral polarization-encoding(SPE) for broadband light pulses, which is realized by inducing optical rotatory dispersion(ORD), and decoded by compensating ORD. Combining with polarization-sensitive devices, SPE can not only work to control polarization-dependent transmission for central wavelength or bandwidth-tunable filtering, but also can be used for broadband regenerative or multi-pass amplification with a polarization-dependent gain medium to improve output bandwidth. SPE is entirely passive thus very simple to be designed and aligned. By using an ORD crystal with a good transmission beyond 3-μm mid-infrared region, e.g., Ag Ga S_2, SPE promises to be applied for the wavelength tuning lasers in mid-infrared region, where the tunning devices are rather under developed compared with those in visible and near-infrared region.     

Crystal growth,structure and optical properties of Pr~(3+) -doped yttria-stabilized zirconia single crystals

The development of blue semiconductor light-emitting diodes(LEDs) has produced potential applications for Prdoped materials that can absorb blue light, especially crystals, and we now report structure and optical properties for high-quality Pr-doped single crystals of yttria-stabilized zirconia(YSZ) grown by the optical floating zone(FZ) method.X-ray diffraction(XRD) and Raman spectroscopy showed that all of the single crystal samples were in the cubic phase,whereas the corresponding ceramic samples contained a mixture of monoclinic and cubic phases. X-ray photoelectron spectroscopy(XPS) and electron paramagnetic resonance(EPR) spectroscopy showed that Pr was present as the Pr~(3+) ion in ceramic rods and single crystals after heating to high temperatures. The absorption and photoluminescence excitation(PLE) spectra of the Pr-doped YSZ crystals measured at room temperature showed strong absorption of blue light, while their photoluminescence(PL) spectra showed five emission peaks at 565 nm, 588 nm, 614 nm, 638 nm, and 716 nm under450 nm excitation. The optimum luminescence properties were obtained with the crystal prepared using 0.15 mol% Pr_6O_(11),and those with higher concentrations showed evidence of quenching of the luminescence properties. In addition, the color purity of Pr-doped YSZ single crystal reached 98.9% in the orange–red region.     

Measurement of Solid-gas Two-phase Flow using Optical Fiber Sensor

ＭｅａｓｕｒｅｍｅｎｔｏｆＳｏｌｉｄ┐ｇａｓＴｗｏ┐ｐｈａｓｅＦｌｏｗｕｓｉｎｇＯｐｔｉｃａｌＦｉｂｅｒＳｅｎｓｏｒＦＡＮＨｕａＣＨＥＮＹｕａｎｄｉＴＡＮＹｕｓｈａｎ（ＩｎｓｔｉｔｕｔｅｏｆＬａｓｅｒ＆ＩｎｆｒａｒｅｄＡｐｐｌｉｃａｔｉｏｎｓｉｎＸｉ...     

Diffractive optics: Design, realization, and applications

This paper presents methods for designing and recording optimal computer-generated diffractive optical elements. The design method is based on an analytic ray-tracing procedure for minimizing aberrations. The recording involves computer-generated masks and multiple lithographic processes in order to form reflective and transmissive multilevel, surface relief-phase, diffractive elements. As a result, the elements can have high diffraction efficiencies over a broad range of incidence angles. Even generalized diffractive elements that operate with highly uniform diffraction efficiency and polychromatic radiation can be designed and recorded by optimizing the shape and height of the relief gratings. To illustrate the effectiveness of the diffractive optical elements, they have been incorporated into a number of applications, involving visible as well as infra-red radiation. Some that deal with coordinate transformation, beam shaping, and polarization control are briefly reviewed.     

Effects of low-LET radiations on CR-39 track detector

The effects of Co-60 gamma-rays and about 25-MeV pulsed electrons have been investigated on CR-39 plastic nuclear track detector. The bulk etch rate was measured as a function of the absorbed dose under three different irradiation conditions; gamma-ray exposure in air at the dose rate of 6 kGy/h, that in vacuum and electron shower in air at 126 kGy/h on average. It was found that the bulk etch rate (V) increased nearly exponentially with the dose (D); V=V₀exp(kD), and the characteristic parameter (k) was 35, 9 and 12 MGy⁻¹, respectively. It is considered that a lack of oxygen in damage formation processes could occur momentarily during a short electron pulse, just similarly to the vacuum effect of reduction in track etch rates in outgassed CR-39 plastic.     

用蓝色光二极管测量掺钛蓝宝石飞秒激光脉冲宽度

用蓝色光二极管双光子跃迁光电流信号测量掺钛蓝玉石飞秒激光脉冲宽度，实验高精度地记录了二阶干涉自相关曲线及其精细结构，由于用蓝色二极管双光子跃迁代替了常用的二次谐波，而且光信号直接转化为电信号，从而使飞秒激光脉冲宽度的测量大为简化。