脱氧核糖核酸在汞膜电极上的电化学行为

首次在汞膜电极上利用循环安，微分脉冲和交流伏安法研究脱氧核糖核酸（ＤＮＡ）的电化学行为，结果表明汞膜电极作为一类固体电极可应用于负电位区ＤＮＡ电化学行为的研究。同时结合凝胶电泳和ＵＶ光谱法，研究了用纯高氯酸处理的ＤＮＡ的氧化还原特性，结果表明纯高氯酸可经起ＤＮＡ的变性和降解，纯高氯酸不适宜ＤＮＡ的变性处理。     

Fabrication of solid thin film electrolyte and LiCoO2 by aerosol flame pyrolysis deposition

Aerosol flame pyrolysis deposition method was applied to deposit the oxide glass electrolyte film and LiCoO₂ cathode for thin film type Li-ion secondary battery. The thicknesses of as-deposited porous LiCoO₂ and Li₂O–B₂O₃–P₂O₅ electrolyte film were about 6 μm and 15 μm, respectively. The deposited LiCoO₂ was sintered for 2 min at 700 °C to make partially densified cathode layer, and the deposited Li₂O–P₂O₅–B₂O₃ glass film completely densified by the sintering at 700 °C for 1 h. After solid state sintering process the thicknesses were reduced to approximately 4 μm and 6 μm, respectively. The cathode and electrolyte layers were deposited by continuous deposition process and integrated into a layer by co-sintering. It was demonstrated that Aerosol flame deposition is one of the good candidates for the fabrication of thin film battery.     

原油乳状液破乳的动态法研究

The stability of different crude oil emulsions from ASP flooding production well is studied by the method of a stirred tank. The demulsifying of crude-oil emulsion by different demulsifying agents is discussed. The breakage of the crude oil emulsions from the well PO11 by the different types and concentrations of the emulsifying agents is also discussed. The breaking mechanism of the demulsifying agent is described microscopically.     

Tl2O3/聚-N-乙烯基咔唑复合纳米线的研究

Stable monolayers of electropolymerized poly-N-vinylcarbazole (EPVK) and arachidic acid(AA) are obtained on a subphase of alkaline Tl2O3 colloidal solutions. As revealed by the atomic force microscope, there is phase separation in the mixed LB monolayers. Transmission electron microscopic observations reveal that ordered arrays of composite Tl2O3/Epvk nanowires are formed in the mixed monolayers. Formation of the composite nanowire arrays is attributed to the ordered adsorption of Tl2O3 colloidal particles along the polycationic EPVK chains. The composite nanowire array is 3.2nm wide with a spacing of 2.7nm.The composite nanowire arrays can also be formed when pure EPVK is used. Composite LB multilayers of Tl2O3/EPVK nanowire arrays are prepared. The bilayer spacing is 5.54nm.The present study is of importance to the fabrication of inorganic semiconductor/functional polymer composite nanowires.     

硫化物纳米级粒子化膜的形成与气相性质的影响

采用偏振光反光度、紫外及可见光谱、电子显微镜形貌观察、粒子大小测定及电子衍射等方法加以系统研究硫化锌纳米级粒子化膜的制备与气相性质的影响．     

长链脂肪酸LB膜的X射线衍射研究

利用Langmuir-Blodgett技术制备了硬脂酸、花生酸及其混合酸的多层LB膜。用低角X射线衍射研究了它们的周期结构,硬脂酸和花生酸的LB膜在2θ=0.8°～23°的范围内分别出现13个和12个布拉格衍射峰,由此计算了它们的等同周期。用模型计算了它们衍射峰的强度,得到了与实验一致的衍射强度奇偶起伏的结果。在混合酸的LB膜中,可以观察到等同周期随混合比变化的规律。     

多晶Hg0.09Cd0.91Te薄膜的光电化学行为

富镉Hg_(1-x)Cd_xTe是一种新型的光电转换材料,已用于固体结太阳能光伏电池:ITO/CdS/Hg_(1-)Cd_xTe/Au。我们曾对Hg_(1-x)Cd_xTe的电沉积机理作过研究。最近我们用电沉积制备的Hg_(0.09)Cd_(0.91)Te多晶薄膜做成了液体结太阳能光电化学电池并观察到明显光电响应。     

大口径厚液膜毛细管柱的制备

制备出了内径从0.46～0.74mm、液膜厚度从0.9～5.6μm的SE-54大口径厚液膜玻璃毛细管柱,并对它们的性能进行了评价。对低沸点的C_1-C_4烃进行了初步分离。     

Surface modification of low density polyethylene (LDPE) film by low pressure O2 plasma treatment

In this work, low pressure glow discharge O₂ plasma has been used to increase wettability in a LDPE film in order to improve adhesion properties and make it useful for technical applications. Surface energy values have been estimated using contact angle measurements for different exposure times and different test liquids. In addition, plasma-treated samples have been subjected to an aging process to determine the durability of the plasma treatment. Characterization of the surface changes due to the plasma treatment has been carried out by means of Fourier transformed infrared spectroscopy (FTIR) to determine the presence of polar species such as carbonyl, carboxyl and hydroxyl groups. In addition to this, atomic force microscopy (AFM) analysis has been used to evaluate changes in surface morphology and roughness. Furthermore, and considering the semicrystalline nature of the LDPE film, a calorimetric study using differential scanning calorimetry (DSC) has been carried out to determine changes in crystallinity and degradation temperatures induced by the plasma treatment. The results show that low pressure O₂ plasma improves wettability in LDPE films and no significant changes can be observed at longer exposure times. Nevertheless, we can observe that short exposure times to low pressure O₂ plasma promote the formation of some polar species on the exposed surface and longer exposure times cause slight abrasion on LDPE films as observed by the little increase in surface roughness.     

Physicochemical characterization of biological glass coatings

Metallic implants are widely used in orthopaedic surgery but metal release has been reported by several authors. High metallic ion concentration in surrounding tissues may play a major role in therapeutic failure. We have investigated in vivo and in vitro two biological glasses (BVA and BVH) used as coatings of metal implants. Physicochemical characterization was made by several complementary methods, particularly particle induced x‐ray emission (PIXE) and energy‐dispersive x‐ray spectroscopy (EDXS) associated with electronic microscopy. Analyses clearly show the differences of behaviour between both glasses. The BVA glass is bioactive, i.e. it develops a direct chemical bond between prosthesis and bone by the formation of a calcium phosphate layer at its surface. These structural and compositional modifications are caused by hydrolysis of the glass. After its dissolution BVA glass is replaced by bone, which ensures better integration of the implant in the bone site. The BVH glass is not bioactive and is used as a cement to isolate the metal implant from the biological environment, but the coating disaggregates with implantation time and glass grains migrate through the bony lacuna network. Copyright © 2003 John Wiley & Sons, Ltd.