Fabrication of a Single Layer and Bilayer Potentiometric Biosensors for Penicillin by Galvanostatic Entrapment of Penicillinase into Polypyrrole Films

A single layer and bilayer potentiometric biosensors for the detection of penicillin have been developed. The favourable conditions that were established for the polypyrrole‐penicillinase ((PPy‐P’nase) single layer biosensor were 0.03 M pyrrole, 50 U/mL P’nase, 0.01 M penicillin, applied current density of 0.9 mA/cm² and a polymerisation time of 40 s. The optimum conditions for the formation of the outer layer of the bilayer were: (a) 0.1 M Py, 19 U/mL P’nase, 0.01 M pen, current density of 0.9 mA/cm² and a polymerisation time of 40 s. The minimum detectable penicillin concentration with the bilayer potentiometric biosensor was 0.3 µM and the linear concentration range was 7.5–146 µM. The average percentage recovery of penicillin that was found in amoxycillin 500 mg was 113±24 %. The determination of penicillin in milk was fraught with problems of non‐specific binding of penicillin to the milk.     

Gold nanoparticles-enhanced bisphenol A electrochemical biosensor based on tyrosinase immobilized onto self-assembled monolayers-modified gold electrode

A novel electrochemical sensor based on the immobilization of tyrosinase(tyr) onto gold nanoparticles(nano-Au) and thioctic acid amide(T-NH2) self-assembled monolayers(SAMs)-modified gold electrode has been developed for the determination of bisphenol A(BPA).It was found that the nano-Au could significantly enhance the electrochemical response of tyr/nano-Au/T-NH2/Au electrode to BPA,and the enhancement effect of nano-Au on the current response was also related to the enzyme.The results indicated that the biosensor could be used as a detector for BPA determination with a linear range from3.99 ×10-7mol/L to 2.34 ×10-4mol/L and a detection limit of 1.33×10-7mol/L.In addition,this biosensor showed good reproducibility.     

Sensitive Nucleic Acid Detection at NH2‐MWCNTs Modified Glassy Carbon Electrode and its Application for Monitoring of Gemcitabine‐DNA Interaction

An electrochemical dsDNA nanobiosensor was fabricated using amino‐functionalized multi walled carbon nanotubes modified glassy carbon electrode (NH₂fMWCNTs/GCE) for the sensitive detection of DNA bases and electrochemical monitoring of drug‐DNA interaction. The influence of functional groups on MWCNT was studied by MWCNT functionalized with NH₂ (NH₂fMWCNTs) and COOH (COOHfMWCNT) groups based on the signal of DNA bases. The modified electrodes were characterized by scanning electron microscopy. One layer of calf thymus double stranded deoxyribonucleic acid (ct‐dsDNA) was immobilized onto the NH₂fMWCNTs/GCE (dsDNA/NH₂fMWCNTs/GCE). The dsDNA/NH₂fMWCNTs/GCE were used to investigate the interaction between the dsDNA and the anticancer drug gemcitabine by differential pulse voltammetry in acetate buffer of pH 4.70. For the confirmation of interaction, the lowering in intensity of the current signals of guanine and adenine was considered as an indicator. Electrochemical impedance spectroscopy studies were performed for the comparison of the modified surfaces. In order to define and visualize the interaction mechanism between gemcitabine and dsDNA/NH₂fMWCNTs/GCE at the molecular level, in silico methods including docking and molecular dynamics simulations were employed.     

Electrochemical characteristics of a platinum electrode modified with a matrix of polyvinyl butyral and colloidal Ag containing immobilized horseradish peroxidase

A new hydrogen peroxide biosensor was constructed, which consisted of a platinum electrode modified by a matrix of polyvinyl butyral (PVB) and nanometer-sized Ag colloid containing immobilized horseradish peroxidase (HRP), and using Co(bpy)₃³⁺ as mediator in the hydrogen peroxide solution. The electrochemical characteristics of the biosensor were studied by cyclic voltammetry and chronoamperometry. The modified process was characterized by electrochemical impedance spectroscopy and cyclic voltammetry. The HRP immobilized on colloidal Ag was stable and retained its biological activity. The sensor displays excellent electrocatalytic response to the reduction of H₂O₂. Analytical parameters such as pH and temperature were also studied. Linear calibration for H₂O₂ was obtained in the range of 1×10^–5 to 1×10^–2 M under optimized conditions. The sensor was highly sensitive to H₂O₂, with a detection limit of 2×10^–6 M, and the sensor achieved 95% of steady-state current within 10 s. The sensor exhibited high sensitivity, selectivity and stability.     

功能碳黑修饰的丝网印刷碳糊电极葡萄糖生物传感器的特性与机理

从碳黑表面引发苯乙烯磺酸钠的原子转移自由基聚合制备了聚(苯乙烯磺酸钠)改性碳黑(CB-g-PSS),并分别以掺杂和沉积两种不同方式修饰电极的生物敏感膜,再在生物敏感膜上吸附固定葡萄糖氧化酶,制作了两种葡萄糖氧化酶传感器,得到了不同的效果.实验结果表明,将CB-g-PSS与成膜材料掺杂制作的生物传感器与无修饰传感器相比,响应灵敏度下降了1/3;将CB-g-PSS沉积修饰丝网印刷碳糊电极制作的传感器与无修饰传感器相比,响应灵敏度提高了2倍,且对1.1～33.3 mmoL/L的葡萄糖待测样本,RSD均＜7%,稳定性良好,有较高的应用价值.通过实验分析了CB-g-PSS以不同方式修饰电极的工作机理,结果表明,选择正确的修饰方式,能够发挥CB-g-PSS的导电效应及纳米效应,使其有利于酶的固定,提高响应灵敏度并改善酶促反应动力学特性.     

Examination of performance of glassy carbon paste electrode modified with gold nanoparticle and xanthine oxidase for xanthine and hypoxanthine detection

A composite electrode was prepared by modifying glassy carbon microparticles with gold nanoparticles (Au-nps) and xanthine oxidase enzyme (XOD) for xanthine (X) and hypoxanthine (Hx) detection. After the optimization of the system for X, the biosensor was characterized for X and Hx. A linearity was obtained in the concentration range between 5.00 × 10⁻⁷ and 1.00 × 10⁻⁵ M for X with equation of y = 0.24x + 0.712 and 5.00 × 10⁻⁶ to 1.50 × 10⁻⁴ M for Hx, with equation of y = 0.014x + 0.575, respectively. Obtained results were compared to X and/or Hx biosensors including/not including Au-np in the structure. The developed system was also applied for detection of Hx in canned tuna fish sample and very promising results were obtained.     

基于Sol-gel膜和多壁碳纳米管/铂纳米颗粒增效的电流型L-乳酸生物传感器

构建了基于多壁碳纳米管(Multi-walled carbon nanotubes,MWCNTs)和铂纳米颗粒(Pt-nano)的电流型L-乳酸生物传感器。将Sol-gel膜覆盖在L-乳酸氧化酶(L-lactate oxidase,LOD)和MWCNTs/Pt-nano修饰的电极表面。实验结果表明:传感器的最佳工作条件为:检测电压0.5V;缓冲液pH6.4;检测温度25℃。此传感器的响应时间为5s,灵敏度是6.36μA/(mmol/L)。连续检测4星期其活性仍保持90%,线性范围为0.2～2.0mmol/L,且抗干扰能力强。在实际血样的检测中,此传感器与传统的分光光度法具有很好的一致性。     

用于DNA杂交检测的丝网印刷型生物传感器的研究

将单链DNA(ssDNA)固定到丝网印刷碳电极上构成电化学DNA传感器,采用电化学指示剂,建立DNA杂交的检测方法.Co(phen)33+电化学指示剂通过钴盐与配体邻菲罗啉络合制备,采用等离子发射光谱法(ICP-AES)和核磁共振法(NMR)表征功能基团,采用循环伏安法(CV)分析指示剂的电化学特性,并以此为基础研究ssDNA在电极表面的固定及DNA杂交过程.本研究探讨了直接吸附、静电吸附与键合等3种ssD-NA在电极表面的固定方法,结果表明,静电吸附法和键合法具有较高的ssDNA固定量,采用静电吸附法固定探针的电极杂交目标DNA后,Co(phen)33+易于嵌入双链DNA (dsDNA)中,CV峰电流(ip)信号随目标DNA浓度增加.本研究采用静电吸附ssDNA的电极检测DNA杂交,实验表明,当探针固定液中ssDNA浓度为5 mg/L时,目标DNA浓度在6.65×10- 8～4.26× 10-6mol/L范围内,Co(phen)33+在dsDNA修饰电极上ip值与DNA浓度呈良好的线性关系,R2为0.9819.本研究为建立新的微生物分子分型手段提供了初步依据.     

基于碳纳米管修饰电极的胆碱电化学发光生物传感器研制

在碳纳米管(CNTs)和K3Fe(CN)6修饰的铂电极上吸附固定胆碱氧化酶,以鲁米诺为发光试剂,研制了胆碱电化学发光(ECL)生物传感器.CNTs可有效提高电极表面的电荷传输能力、提高电极表面的生物相容性和对酶分子的固载能力;K3Fe(CN)6对酶活性具有激活作用,同时对H2O2增敏的鲁米诺ECL有增强作用,均有利于提...     

Acetylcholinesterase biosensor based on single-walled carbon nanotubes--Co phtalocyanine for organophosphorus pesticides detection

A simple and reliable technique has been developed for the construction of an amperometric acetylcholinesterase biosensor based on screen-printed carbon electrodes. For the first time, one-step modification using single-walled carbon nanotubes and Co phtalocyanine has been proposed to decrease the working potential and to increase the signal of thiocholine oxidation. The biosensor developed made it possible to detect 5-50 ppb of paraoxon and 2-50 ppb of malaoxon with detection limits of 3 and 2 ppb, respectively (incubation 15 min). The biosensor showed high reproducibility when measurements of the substrate and inhibitor were performed (R.S.D. about 1% and 2.5%, respectively). The reliability of the inhibition measurements was confirmed by testing spiked samples of sparkling and tape waters.