Sol-Gel Fabrication of Rare-Earth Doped Photonic Components

The use of sol-gel to fabricate silica-on-silicon waveguides, and particularly erbium-doped waveguide amplifiers, is reviewed. In particular, efforts to use sol-gel to improve molecular homogeneity in heavily Er-doped silica-based films is discussed. A variety of material studies carried out to investigate the gain limitations found in these materials is then presented. These include x-ray diffraction, ellipsometry and Rutherford backscattering. Excess heat treatment is used to force crystallisation of the films, and analysis of the resulting structure is used to infer properties of the glass before the additional heating. The use of erbium alkoxide precursors is shown to alter the erbium environment in the final glass, in comparison to the use of inorganic erbium salts.     

硅基光子集成研究进展

报道了国际上关于硅基光子集成的最新研究进展和本课题组在该领域的研究成果,包括对一些光收发模块、III-V族/硅基激光器等集成器件的结构改进和工艺的探索,展示了兼容互补金属氧化物半导体工艺的硅基光子集成在信息技术领域中的巨大前景.可以预见,硅基光子集成已成为硅光子学的主要研究内容,硅光子学及硅基光子集成的发展目标是趋向更高速率、更低功耗及更大集成密度.     

Sonochemical synthesis of carbon dots,mechanism, effect of parameters,and catalytic,energy, biomedical and tissue engineering applications

Carbon-based nanomaterials are gaining more and more interest because of their wide range of applications. Carbon dots (CDs) have shown exclusive interest due to unique and novel physicochemical, optical, electrical, and biological properties. Since their discovery, CDs became a promising material for wide range of research applications from energy to biomedical and tissue engineering applications. At same time several new methods have been developed for the synthesis of CDs. Compared to many of these methods, the sonochemical preparation is a green method with advantages such as facile, mild experimental conditions, green energy sources, and feasibility to formulate CDs and doped CDs with controlled physicochemical properties and lower toxicity. In the last five years, the sonochemically synthesized CDs were extensively studied in a wide range of applications. In this review, we discussed the sonochemical assisted synthesis of CDs, doped CDs and their nanocomposites. In addition to the synthetic route, we will discuss the effect of various experimental parameters on the physicochemical properties of CDs; and their applications in different research areas such as bioimaging, drug delivery, catalysis, antibacterial, polymerization, neural tissue engineering, dye absorption, ointments, electronic devices, lithium ion batteries, and supercapacitors. This review concludes with further research directions to be explored for the applications of sonochemical synthesized CDs.     

Synthesis of tubuphenylalanine and epi-tubuphenylalanine via regioselective aziridine ring opening with carbon nucleophiles followed by hydroboration-oxidation of 1,1-substituted amino alkenes

An efficient synthesis of N-Boc-tubuphenylalanine benzyl ester (N-Boc-Tup-OBn, 1a) and N-Boc-epi-tubuphenylalanine benzyl ester (N-Boc-epi-Tup-OBn, 1b) is reported herein. Regioselective aziridine 4 ring opening with carbon nucleophiles followed by hydroboration of 1,1-substituted aminoalkene 3 using 9-BBN and subsequent oxidation in an alkaline medium are used as the key steps to provide N-tosyl 1,4-aminoalcohols. The 1,4-aminoalcohols are successfully transformed into the desired products with an overall yield of 23% for 1a and 11% for 1b over 8 consecutive steps separately.     

2D Organic Photonics: An Asymmetric Optical Waveguide in Self‐Assembled Halogen‐Bonded Cocrystals

Anisotropic organic molecular construction and packing are crucial for the optoelectronic properties of organic crystals. Two‐dimensional (2D) organic crystals with regular morphology and good photon confinement are potentially suitable for a chip‐scale planar photonics system. Herein, through the bottom‐up process, 2D halogen‐bonded DPEpe‐F₄DIB cocrystals were fabricated that exhibit an asymmetric optical waveguide with the optical‐loss coefficients of R_Backward=0.0346 dB μm^?1 and R_Forward=0.0894 dB μm^?1 along the [010] crystal direction, which can be attributed to the unidirectional total internal reflection caused by the anisotropic molecular packing mode. Based on this crystal direction‐oriented asymmetric photon transport, these as‐prepared 2D cocrystals have been demonstrated as a microscale optical logic gate with multiple input/out channels, which will offer potential applications as the 2D optical component for the integrated organic photonics.     

PHBV电纺纤维结构与形态的研究

利用电纺丝法制备了超细聚 β 羟基丁酸戊酸酯 (PHBV)纤维 ,通过扫描显微镜 (SEM)、差热分析(DSC)、宽角X射线衍射和偏振红外吸收光谱对产品进行了结构与形态的表征 .研究了纺丝过程中溶液浓度、电压和接收距离 3个参数对纤维形态的影响 .结果表明 ,溶液浓度是决定性的 ,只有高于一个定值才能获得单一的纤维产品 .与流延成型的PHBV相比 ,电纺丝具有较高的取向度和结晶度 .原因可能是 ,电场力下喷丝震荡过程中带来的拉伸作用从而引起分子链的规整排列     

有机杂环分子的双光子吸收特性

利用少态模型和密度泛函理论计算了新近合成的三个具有有机杂环结构的苯并噻唑衍生物的非线性光学性质. 计算结果表明，随着有机分子的分子电子离域结构的增大，最大吸收峰红移.当共轭链较长时，共轭链的增长对增强分子双光子吸收截面的影响远大于吸电子基强度变化的影响.该类分子具有较好的双光子吸收特性.最后给出了三个分子的电荷转移过程.     

透皮控释给药研究

总结了近年来国内外透皮给药医用高分子材料，促进透皮吸收的化学和物理方法研究成果，介绍了透皮控释给药研究的最新发展动向。     

Polydispersed Powders (Nd3+:YVO4) for Ultra Efficient Random Lasers

Random lasers hold the potential for cheap, coherent light sources that can be miniaturized and molded into any shape with several other added benefits such as speckle‐free imaging; however, they require improvements specifically in terms of efficiency. This paper details for the first time a strategy for increasing the efficiency of a random laser that consists in using smaller particles, trapped between large particles to serve as absorption and gain centers whereas the large particles control mainly the light diffusion into the sample. Measurements of backscattering cone, sample absorption, reflection, and laser emission are used to determine the samples' transport mean free path, fill fractions, laser efficiency, and the average photon path lengths inside the scattering medium for backscattered pump photons. A record slope efficiency of 50% is reached by optimizing pump photon diffusion and absorption in a powder pellet composed by a polydispersed particle size distribution (smaller particles between bigger ones) from a grinded and sieved 1.33 mol% yttrium vanadate doped with neodymium crystal with mean particle size of 54 µ m.