Separation and determination of m-phenoxybenzaldehyde reaction products by capillary gas chromatography

A capillary GC method employing an internal standard has been developed and successfully used for quantitative determination both of the raw materials used for the manufacture of m-phenoxybenzaldehyde and for the components of the reaction mixtures obtained at various stages of the development of the process. A complete analysis can be performed in a single temperature programmed run.     

FexNi100−x nanometric films deposited by laser ablation on SiO2/Si substrates

Fe_xNi_100−x nanometric films were deposited on SiO₂/Si substrates at room temperature using the pulsed laser deposition technique. The targets were Fe-Ni amorphous magnetic foils with composition Fe₅₀Ni₅₀, Fe₃₅Ni₆₅ and Fe₂₂Ni₇₈. Morphological and structural properties of the deposited films were investigated using scanning electron microscopy, Rutherford backscattering spectrometry, grazing incidence X-ray diffraction, and X-ray reflectivity. Electrical and magnetic characteristics of the films were investigated by using the four-point probe and the magneto-optic Kerr effect techniques, respectively. The film properties are strictly dependent on the Fe-Ni compositional ratio.     

微观世界探索

论文系统地阐述了从原子、原子核到基本粒子内部结构研究的历史及现状，讨论了微观物理理论和实验研究的前景和展望．论文还阐述了微观物理与宏观物理(宇宙论和天体物理等)的结合与交叉，以无可争辨的实验事实阐明了微观世界和宏观世界的无限性．     

微观世界探索(续)

论文系统地阐述了从原子、原子核到基本粒子内部结构研究的历史及现状，讨论了微观物理理论和实验研究的前景和展望．论文还阐述了微观物理与宏观物理(宇宙论和天体物理等)的结合与交叉，以无可争辨的实验事实阐明了微观世界和宏观世界的无限性．     

非球面最适球面的确定方法——三点法

根据非球面生产的实际情况．指出非球面最适球面的确定方法．详细分析最适球面的计算方法．并对一抛物面进行了实例计算，通过与最小二乘法的计算结果比较．指出该方法具有计算简单、与加工工艺过程相符合等特点。     

Indentation responses of piezoelectric films

Frictionless indentation responses of transversely isotropic piezoelectric film/rigid substrate systems under circular cylindrical indenter (i.e., punch), conical indenter (i.e., cone), and spherical indenter (i.e., sphere) are investigated. Both insulating and conducting indenters are considered. The technique of Hankel transformation is employed to derive the corresponding dual integral equations for the mixed boundary value indentation problems. For the two limiting cases of infinitely thick and infinitely thin piezoelectric films, closed-form solutions are obtained. For piezoelectric films of finite thickness, a numerical method is constructed to solve the dual integral equations and semi-empirical models having only two unknown parameters are proposed for the responses of indentation force, electric charge and electric potential, and contact radius. With the two parameters inferred from the numerical results, the semi-empirical formulae are found to provide good estimates of the indentation responses for the two limiting cases of infinitely thick and thin piezoelectric films, as well as those in between. The inferred parameters in the proposed semi-empirical formulae for normalized indentation force and electric charge are checked against four different piezoelectric materials and are found to be insensitive to the selection of piezoelectric materials. It is believed that the proposed semi-empirical indentation formulae are useful in developing experimental indentation techniques to extract the material properties of piezoelectric films.     

Axisymmetric frictionless contact of functionally graded materials

The main interest of this study is a new method to solve the axisymmetric frictionless contact problem of functionally graded materials (FGMs). Based on the fact that an arbitrary curve can be approached by a series of continuous but piecewise linear curves, the FGM is divided into a series of sub-layers with shear modulus varying linearly in each sub-layer and continuous at the sub-interfaces. With this model, the axisymmetric frictionless contact problem of a functionally graded coated half-space is investigated. By using the transfer matrix method and Hankel integral transform technique, the problem is reduced to a Cauchy singular integral equation. The contact pressure, contact region and indentation are calculated for various indenters by solving the equations numerically. An erratum to this article can be found at     

Modification of multiwalled carbon nanotubes by carboxy groups and determination of the degree of functionalization

Multiwalled carbon nanotubes were modified by carboxy groups. Four independent methods for the determination of the degree of functionalization of the surface were proposed: ¹³C NMR spectroscopy, thermogravimetry, titrimetry, and fluorimetry. The first two methods show the total content of carboxy groups in the sample, and the latter two methods give information about the content of the surface groups only. Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 2, pp. 291–295, February, 2008.     

逻辑函数在布尔减-异或、布尔除-符合代数系统中的规范展开式

证明了布尔减、异或运算以及布尔除、符合运算的完备性,并从与-异或及或-符合代数系统中的RM、CRM展开式出发,分别推导了任意逻辑函数在布尔减-异或及布尔除-符合代数系统中的规范展开式.举例说明了与-或-非代数系统中规范展开式与布尔减-异或、布尔除-符合代数系统中的规范展开式之间的转换.