2，2＇－偶氮二异丁酸二甲酯的合成及其热分解反应的研究

本文研究了２，２＇－偶氮二异丁酸二甲酯的合成及其在甲苯、二甲苯中的热分解反应动力学，得到了其热分解反应速度常数与反应温度的关系式：Ｋ＿ｄ＝１．６３×１００￣（－１４）ｅｘｐ（－１２３．３ＫＪ／ＲＴ）２，２＇－偶氮二异丁酸二甲酯作为苯乙烯自由基聚合的引发剂，其单体转化率随引发剂用量的增加而增高，产物分子量则随之下降；引发剂用量在５％以上时，可得到分子量低于１０￣３的含有酯基端基的聚合物。     

有机锡聚醚的合成及性质的研究

利用界面缩聚技术,将二烷基二氯化锡、二(β-烷氧羰乙基)二氯化锡与有机二元醇、酚、硫醇反应,制成了一系列新的有机锡大分子化合物.对这些新化合物进行了分子量、红外光谱、TG/DTG测试.对有机锡大分子化合物阻止聚氯乙烯(PVC)热分解性能进行了测定.结果表明,新合成的有机锡聚醚化合物可作为PVC热稳定剂使用.     

Addition reactions of 2-polyfluoroalkyl substituted 1,3-thiazolin-4-one derivatives

2-Polyfluoroalkyl-5-methoxycarbonylmethylene-thiazolin-4-ones react as dienophiles on the exo-cyclic ylidene bond to give spiro-derivatives and as 1,3-dienes with olefins to give dihydropyranothiazole derivatives. The endo-cyclic CN bond in these compounds do not enter into the cycloaddition reactions.     

Densities, refractive indices and speeds of sound of the ternary mixtures (dimethyl carbonate + methanol + ethanol) and (dimethyl carbonate + methanol + 1-propanol) at T=298.15 K

Density, refractive index and speed of sound at T=298.15 K and atmospheric pressure have been measured over the entire composition range for (dimethyl carbonate (DMC) + methanol + ethanol) and (DMC + methanol + 1-propanol). Excess molar volumes, changes of refractive index on mixing and deviations in isentropic compressibility for the above systems have been calculated. The calculated quantities are further fitted to the Cibulka equation to estimate the ternary fitting parameters. Standard deviations from the regression lines are shown.     

二甲苯异构体双电荷离子和单电荷离子的动能谱研究

利用质量分析离子动能谱和碰撞诱导解离技采研究了邻、间、对二甲苯分子在电子轰击质谱中产生的双电荷离子[C8H10]2+、[C8H9]2+和单电荷离子[C8H10]+。根据测定的电荷分离反应的释放动能T和由此估算的双电荷离子电荷分离反应过渡态两电荷间距R,推测出过渡态的结构,利用单电荷离子[C8H10]+的MIKES/CID谱可区分邻二甲苯与间、对二甲苯异构体.     

Cyclodextrin effects on physical–chemical properties of novocaine

The UV-vis absorption and the fluorescence emission spectra of novocaine were analysed in aqueous cyclodextrin (CD) solutions. Either the absorbance read at λ_max 290 nm or the fluorescence emission intensity at λ_ems 346 nm increase in the presence of both α- and β-CD due to the formation of 1:1 inclusion complexes. The lower polarity of the CD-cavity sensed by the included drug enhances the emitted fluorescence; in fact, the same effect was observed in aqueous mixtures of acetonitrile, dioxane, or dimethylsulfoxide. The inclusion complex formation between the monocation of novocaine and CDs diminishes the electrical conductance of aqueous solutions of novocaine hydrochloride (NoHCl). Both the nitrosation reaction in aqueous acid medium and the ester hydrolysis in alkaline medium are retarded in the presence of CDs. The strongest effect was observed with β-CD as a consequence of the higher stability inclusion complex.     

Ester interchange reactions catalyzed by tin compounds in reactive processing: NMR contribution via reactions with model compounds

Interchange reactions involving esters were used in reactive processing with a view to obtaining polymer blends with stabilized morphology. Dibutyltinoxide (DBTO) appeared to be an excellent catalyst for these reactions. In fact, it was shown that the true catalytic entity is a dimeric alkoxy, acyloxy distannoxane entity formed in situ, during processing, by the reaction of the DBTO with the polymer ester groups. This compound was first obtained with model esters and characterized by multinuclear NMR analysis (¹H, ¹³C, ¹¹⁹Sn). The catalytic efficiency of the in situ polymeric distannoxane was compared with other added parent distannoxanes. Later on – still with model compounds – ligand exchanges at the tin sites were investigated and it was shown that these exchanges are not essential to the catalyst activity, but when they take place it increases the catalytic efficiency. Then, this type of catalysis was successfully used for interchange reactions in reactive extrusion of different polymer blends, some applications are briefly presented. To cite this article: M.-F. Llauro and A. Michel, C. R. Chimie 9 (2006).     

Effect of ether versus ester tethering on Heck cyclizations

Ether tethers allow Heck cyclizations to proceed in high yields. Ester tethers lead to low yields. Styrene trapping experiments indicate that ester reactions form viable organopalladium intermediates that cannot cyclize efficiently.     

A mild hydrolysis of esters mediated by lithium salts

When treated with amine bases such as triethylamine and various lithium salts in wet solvents, esters are efficiently hydrolyzed to the corresponding acids in good yields. Esters incorporating an α- or β-heteroatom with respect to the ester carbonyl group are hydrolyzed rapidly even at room temperature. To further demonstrate the usefulness of this method, one example is provided where hydrolysis of acetylated camphorsultam is mediated by LiBr.     

Synthesis and conformational analysis by 1H NMR and restrained molecular dynamics simulations of the cyclic decapeptide [Ser-Tyr-Ser-Met-Glu-His-Phe-Arg-Trp-Gly]

Summary The design of enzyme mimics with therapeutic and industrial applications has interested both experimental and computational chemists for several decades. Recent advances in the computational methodology of restrained molecular dynamics, used in conjunction with data obtained from two-dimensional ¹H NMR spectroscopy, make it a promising method to study peptide and protein structure and function. Several issues, however, need to be addressed in order to assess the validity of this method for its explanatory and predictive value. Among the issues addressed in this study are: the accuracy and generizability of the GROMOS peptide molecular mechanics force field; the effect of inclusion of solvent on the simulations; and the effect of different types of restraining algorithms on the computational results. The decapeptide Ser-Tyr-Ser-Met-Glu-His-Phe-Arg-Trp-Gly, which corresponds to the sequence of ACTH_1–10, has been synthesized, cyclized, and studied by two-dimensional ¹H NMR spectroscopy. Restrained molecular dynamics (RMD) and time-averaged restrained molecular dynamics (TARMD) simulations were carried out on four different distance-geometry starting structures in order to determine and contrast the behavior of cyclic ACTH_1–10 in vacuum and in solution. For the RMD simulations, the structures did not fit the NOE data well, even at high values of the restraining potential. The TARMD simulation method, however, was able to give structures that fit the NOE data at high values of the restraining potential. In both cases, inclusion of explicit solvent molecules in the simulation had little effect on the quality of the fit, although it was found to dampen the motion of the cyclic peptide. For both simulation techniques, the number and size of the NOE violations increased as the restraining potential approached zero. This is due, presumably, to inadequacies in the force field. Additional TARMD vacuum-phase simulations, run with a larger memory length or with a larger sampling size (16 additional distance-geometry structures), yielded no significantly different results. The computed data were then analyzed to help explain the sparse NOE data and poor chymotryptic activity of the cyclic peptide. Cyclic ACTH_1–10, which contains the functional moieties of the catalytic triad of chymotrypsin, was evaluated as a potential mimic of chymotrypsin by measurement of the rate of hydrolysis of esters of L-and d-phenylalanine. The poor rate of hydrolysis is attributed to the flexibility of the decapeptide, the motion of the side chains, which result in the absence of long-range NOEs, the small size of the macrocycle relative to that of the substrate, and the inappropriate orientation of the Gly, His, and Ser residues. The results demonstrate the utility of this method in computer-aided molecular design of cyclic peptides and suggest structural modifications for future work based on a larger and more rigid peptide framework.