基于移动Agent技术的医学图像检索方法

针对现有医学图像检索方法中，检索算法速度较慢、准确性较低以及远程检索时占用大量带宽等问题，设计并实现了一种基于移动Agent技术的医学图像检索方法，重点讨论了该方法实现的关键技术，包括提升框架下的M带整数小波变换和提取多通道纹理特征的检索算法．模拟实验结果表明，该方法实时性较强，占用网络带宽较少，采用的算法运算速度提高近10倍、运算复杂度降低约50％，提取的纹理特征能充分表达图像内容，较好地满足了医学图像的检索要求，实现了对医学图像库快速较准确的检索．     

强流脉冲电子束作用下纯镍表层中织构及结构缺陷的演化行为

利用强流脉冲电子束(HCPEB)装置对金属纯Ni进行轰击,采用X射线衍射及透射电子显微镜(TEM)技术详细分析了受轰击样品的变形结构和缺陷。X射线衍射分析表明,经强流脉冲电子束处理后,在{111}和{200}晶面出现了择优取向。TEM表层微观结构分析表明:强流脉冲电子束轰击1次和5次后,晶粒内部形成了大量的(111)[112]型波状条带结构,在波状条带内部包含大量平行的(200)[110]型微条带;10次轰击后,样品变形结构发生变化,除大量的条带状结构外,变形孪晶的数量明显增多。这些变形微结构不仅影响表层的织构演化行为,而且还能细化晶粒,强流脉冲电子束技术为制备表面纳米材料提供了一条有效的途径。     

Calibration of Stress-triaxiality Dependent Crack Formation Criteria: A New Hybrid Experimental–Numerical Method

A new experimental technique has been developed to investigate the onset of fracture in metals at low and intermediate stress triaxialities. The gage section of a flat specimen has been designed such that cracks are most likely to initiate within the specimen center, remote from the specimen boundaries. Along with the specimen, a biaxial testing device has been built to apply a well-defined displacement field to the specimen shoulders. The stress state within the specimen is adjusted by changing the biaxial loading angle. Using this new experimental technique, the crack initiation in metals can be studied experimentally for stress triaxialities ranging from 0.0 to 0.6. The stress and strain fields within the specimen gage section are determined from finite element analysis. The reliability of the computational model of the test set-up has been verified by comparing the simulation results with laser speckle-interferometric displacement measurements during testing. Sample experiments have been performed on the Al-7Si-Mg gravity die casting alloy. A three-step hybrid experimental–numerical calibration procedure has been proposed and applied to determine a phenomenological crack formation criterion for the Al-7Si-Mg alloy.

Copper-containing dendromesogens: the influence of the metal on the mesomorphism

The synthesis and liquid crystalline behaviour of the first and second generations of a dendrimeric structure based on poly(propyleneimine)(DAB-dendr(NH₂)_x) are reported. 4-(4-n-Alkoxybenzoyloxy)salicylaldehydes are used as mesogenic moieties attached at the peripheral amino groups of the dendrimers giving rise to dendromesogens with four and eight mesogenic branches. From these dendromesogens, considered as organic ligands, were prepared six metal-containing dendrimers which incorporate two or four copper atoms in their structures. All the dendrimeric ligands and three of the metal-containing dendrimers exhibit liquid crystalline properties which were studied by optical microscopy, DSC, X-ray diffraction and EPR spectroscopy.     

Laser-induced concentric colour domains in a cholesteric liquid crystal mixture containing a nematic azobenzene dopant

The isothermal formation of concentric colour domains has been observed in a cholesteric mixture doped with 10 wt % of a photochromic nematic material. The host cholesteric mixture included the Merck materials BL131a and BL130, while the photochromic dopant was a mixture of 4-n-butyl-4′-n-alkoxyazobenzenes (BAAB). The helical pitch of the host cholesteric mixture was increased, as expected, on addition of the photochromic nematic material prior to irradiation with the molecules in the purely trans-configuration. On irradiation with low power (0.6 mW) argon ion laser light, cis-isomers formed within the interaction region and concentric colour domains appeared. Selective reflection from the colour domains occurred in the 400–560 nm spectral range. The coloured domains persisted in the time period following irradiation and extended beyond the interaction region because of diffusion of the cis-isomers. Using the diffusion equation, an expression has been obtained for the average concentration of cis-isomers in each of the coloured domains and the dependence of the reflection wavelength upon the concentration of cis-isomers has been determined.     

Spontaneous formation of liquid crystalline phases and phase transitions in highly concentrated plasmid DNA

The liquid crystalline (LC) properties of two supercoiled plasmid DNA samples, pBSK (2958 bp) and pGEM (3000 bp), have been studied using polarised light microscopy (PLM), circular dichroism (CD) and UV–Vis spectroscopy. The influence of methods of isolation on plasmid LC behaviour is described, and using PLM we have demonstrated the spontaneous formation of cholesteric fingerprint-like textures. Preliminary studies of LC phase transitions in pGEM show the irreversibility of LC phase formation, as a consequence of changes in the tertiary structure of supercoiled plasmids. Using UV–Vis spectroscopy a hyperchromic effect was observed with increasing temperature. The CD spectra clearly showed structural changes, and probably mismatching of DNA bases, during cooling. Finally, we have observed an irreversible phase transition in plasmid DNA which is very different from that previously reported in linear DNA.     

烟气脱硫活性炭微波再生特性的实验研究

研究了烟气脱硫活性炭的微波再生特性。通过扫描电镜、N₂吸附、元素分析、Boehm滴定表征微波再生对活性炭孔隙结构和表面化学性质的影响,分析微波再生对活性炭吸附烟气中SO₂的影响规律。结果表明,微波再生功率越高,SO₂再生曲线越窄,峰值浓度越高,有利于载硫活性炭的解吸和高浓度再生气的获取。微波再生对活性炭起到了活化作用,使活性炭的孔结构变狭长。随着微波再生功率的提高,活性炭的微孔比表面积、微孔孔容增加,酸性官能团含量上升,碱性官能团含量下降。100 W再生后,活性炭再生不完全,残留的H₂SO₄影响了活性炭的吸附,活性炭的SO₂吸附性能下降。200、300、400 W工况下,活性炭的SO₂吸附容量均得到提高,且随着再生功率的提高,活性炭的碱性官能团含量上升,微孔比表面积、微孔孔容增加,SO₂吸附性能逐渐增强。     

Properties and Characterization of Modified HZSM—5 Zeolites

Physicochemical and catalytic properties of phosphorus and boron modified HZSM-5 zeolites treated with 100% steam at 673K were investigated.The acidity and distribution of acidic sites were studied by infrared spectroscopy using pyridine as probe molecule and temperature programmed desortion (TPD) of ammonia.The structure of the samples was characterized by XRD,and the textural properties of the catalysts were determined by nitrogen isothermal adsorption-desorption measurements and scanning electron microscopy(SEM).The XRD results show that the modified samples have no novel crystalline phase,indicating a high dispersion of phosphorus and boron species.After treatment,the microporous volume and surface area of the samples markedly decrease,implying the bolockage of the channel.The nitrogen adsorption-desorption measurements suggest that the isothermal type of all samples is a combination of isothermal type Ⅰ and Ⅳ，and all hysteresis loops resemble the H4-type in the IUPAC classification.The total acidity of the modified samples,determined by pyrldine adsorption IR and TPD of ammonia,decreases in contrast to that of the parent HZSM-5.The conversion of n-heptane over P and B steammodified HZSM-5 is higher than that of P and B-modified HZSM-5 zeolites but lower than that of the parent HZSM-5.     

Thermal‐initiating potentialities of vinyl polyperoxides: Transmutation of block‐into‐block copolymer and an exploratory investigation of surface texture and morphology

This article describes the first comprehensive study on the use of vinyl polyperoxides, namely, poly(α‐methyl styrene peroxide) (PMSP) and poly(styrene peroxide) (PSP), as thermal initiators for the synthesis of active polymers, PMSP–PS–PMSP/PSP–PS–PSP, by free‐radical polymerization with styrene. The active polymers have been characterized by ¹H NMR, differential scanning calorimetry, thermogravimetric analysis, and gel permeation chromatography analysis. The PMSP–PS–PMSP/PSP–PS–PSP is further used as the thermal macroinitiator for the preparation of another block copolymer, PS‐b‐PMMA, through the reaction of the active polymers with methyl methacrylate. The mechanism of the block copolymer formation is discussed. Having established the scanning micrograph details of the homopolymer phases, we analyze the surface features and morphology of the block copolymer. Furthermore, the distinction in appearance is highlighted with a view toward strengthening the chemistry with the structural appearance in materials processed differently. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 3665–3673, 2000     

A refined numerical model for determining inflation-burst behavior of composite membrane structures

The airship structures made of multi-layer composite fabrics or membranes can offer the platform for earth observations, wireless communications and space research due to light weight and good mechanical performance. The structural safety and serviceability strongly depend on material properties and working conditions. Available studies are limited within service stress limits or are lack of suitable biaxial tensile constitutive models for understanding structural behavior. This paper thus focuses on a refined numerical model for determining inflation-burst behavior of composite airship structures considering new biaxial constitutive equations, novel failure criteria and manufacture factors.The differences between ideal and real forms of airship structures, e.g. volume difference, demonstrate the necessity for incorporating cutting-pattern effects in the initial numerical model. For structural analysis, stress distributions on real structural forms are different from those on ideal forms because of welding parts that can enhance local stiffness. The ultimate pressures are 56.7 kPa and 59.5 kPa for ideal and real structural forms. Structural breaking initiated at the maximum diameter of ideal structural forms propagates fast while welding parts can prevent breaking propagation for real structural forms. Therefore, the refined numerical model can reveal basic structural behavior and safety performance of airship structures in the inflation-burst processes.