测量行波管电子注的法拉第筒的热分析

利用ANSYS软件对测量行波管电子注截面的法拉第筒探头进行了热分析研究。分析了在单脉冲情况下,测量各种直径的不同脉冲功率密度的电子注、不同脉冲宽度对法拉第筒温度的影响,研究了测量不同功率密度的电子注可以使用的脉冲宽度。结果表明,仅法拉第筒上的注斑区域温度迅速上升,温度梯度较大,其它部分温度基本不变,为保证法拉第筒能够持续正常工作,在单脉冲情况下,对于功率密度大于5×106 W/cm2的电子注,需使用宽度小于0.5 μs的脉冲,最好是0.1 μs和0.2 μs的脉冲进行测量,与文献结果相符。测量一定功率密度的电子注,需选择合适的脉冲宽度。另外,考虑热量的累积效应,分析了脉冲重复频率对法拉第筒工作温度和散热情况的影响。结果表明,脉冲重复频率设为10~100 Hz是比较合适的。     

宽频带无源积分器的设计和实验

为获得宽频带的无源积分器,建立了考虑杂散参数的等效电路并进行了电路仿真。结果表明无源积分器的频响上限由杂散参数决定。对于相同结构的积分器,增大RC积分常数,会使杂散参数的影响加剧,导致积分器的高频响应变差。使用同轴结构可以减小电容的杂散电感,提高积分器的带宽。对制作的RC常数为10 μs的同轴式积分器进行了频响实验。实验结果表明：在偏差小于5％的范围内,同轴式积分器带宽为50 kHz～80 MHz。在D-dot电压探头线下标定实验和初级试验平台(PTS)单路样机激光触发开关输出电压测量中,使用该同轴积分器获取的测量波形没有波形畸变和高频干扰。     

线性变压器源驱动相对论速调管放大器的初步实验

利用新研制的紧凑型线性变压器驱动源（LTD）脉冲功率源二极管产生的电子束源,开展了S波段长脉冲相对论速调管放大器（RKA）的初步实验研究。采用无箔空心阴极和0.9 T恒流源引导磁场从LTD二极管引出了电压600 kV、束流6 kA、脉宽150 ns的环形电子束,该电子束经过1个同轴输入腔和2个同轴调制腔的调制后,产生了幅度5 kA、脉宽110 ns的基波调制束流,采用该调制束流驱动同轴微波提取腔,辐射输出了峰值功率820 MW/110 ns的辐射微波,效率28％,增益36 dB。同时,开展了重复脉冲RKA和相位特性的实验研究,重复频率10 Hz运行时,辐射微波达到800 MW/100 ns,相位抖动小于 20°。     

负载回路电感对低阻抗脉冲形成线输出波形的影响

介绍了一个基于带状脉冲形成线的低阻抗实验平台,针对该平台设计了两种不同类型结构的匹配负载,并分别进行了实验研究,得到了不同的输出脉冲波形,发现轨道结构的水负载具有很低的负载回路电感,适于作为低阻抗脉冲形成线的匹配负载。实验结果表明：在开关电感一定的情况下,负载回路电感是影响低阻抗形成线输出波形的决定性因素。对于0.5 Ω的带状脉冲形成线,只有将负载回路电感控制在30 nH以内,才能获得波形较好的输出脉冲,高压实验结果也验证了此结论。利用数值模拟的方法,分析了负载回路电感对不同阻抗形成线输出波形的影响,结果表明：随着形成线阻抗的增加,负载回路电感对波形的影响越来越小。     

基于卷绕型带状线的感应电压叠加器的初步实验

提出了一种基于卷绕型带状线和感应电压叠加器的重复频率脉冲电子束加速器的技术方案。介绍了一台感应电压叠加器感应单元的结构设计,并建立相应的电路模型,对其响应特性进行了模拟研究。介绍了卷绕型带状线的设计原理,制作了一台输出阻抗约3 Ω、脉冲宽度约230 ns的固态化卷绕型带状脉冲形成线。利用该脉冲发生器作为馈源,对感应电压叠加器感应单元的响应特性进行了实验研究,表明感应单元响应良好。对4级感应电压叠加器分别进行了单次脉冲和5 Hz重复频率的实验研究,结果表明叠加器的输出电压约为输入电压幅值的4倍,电流效率约80%,重复频率条件下,脉冲序列重复性较好。     

引信用激光与加速度传感器复合定高技术

比较了不同类型的弹载定高体制,提出了脉冲激光与重力加速度传感器复合定高的定距原理,并对测距误差进行深入分析,得出其定高精度。对设计出的原理样机进行了实验测试,平台倾斜角度检测实验的结果表明,静态条件下最大角度误差小于0.3;0~500 m定高测试实验的结果表明,测量平均值与实际值最大误差为2.5 m,并且与目标距离无关。     

溴甲烷的等离子体发射光谱测量

利用脉冲射频空心阴极等离子体源激发含溴甲烷的工作气体产生等离子体,采用HR4000型高分辨力光谱仪测量了等离子体的发射光谱。通过光谱比较,在等离子体发射光谱图中得到了位于635.07,700.52 nm的溴原子的特征峰,并实验研究了工作气压和溴甲烷密度对溴原子特征峰强度的影响。实验结果表明：在相同的溴甲烷密度下,溴原子的特征峰强度随气压的升高而降低;在相同的气压条件下,溴原子的特征峰强度随溴甲烷密度的升高而升高;溴甲烷密度测量的精度高于1 g/m3。     

双曲余弦高斯列阵光束通过湍流大气传输的角扩展及方向性

采用积分变换,推导出了双曲余弦高斯（ChG）列阵光束通过湍流大气传输的二阶矩束宽和角扩展的解析公式,给出了ChG列阵光束与一束高斯光束具有相同角扩展的条件。研究表明:相干合成的ChG列阵光束的角扩展比非相干合成的小,但是,非相干合成的ChG列阵光束的角扩展受湍流影响比相干合成ChG光束小;相干合成情况下,ChG列阵光束的角扩展随离心参数、束腰宽度和相对子光束间距的变化均出现振荡,但在湍流中的振荡减弱,非相干合成情况下,ChG列阵光束的角扩展与相对子光束间距和光束数无关。     

Effects of physics change in Monte Carlo code on electron pencil beam dose distributions

Pencil beam algorithms used in computerized electron beam dose planning are usually described using the small angle multiple scattering theory. Alternatively, the pencil beams can be generated by Monte Carlo simulation of electron transport. In a previous work, the 4th version of the Electron Gamma Shower (EGS) Monte Carlo code was used to obtain dose distributions from monoenergetic electron pencil beam, with incident energy between 1 MeV and 50 MeV, interacting at the surface of a large cylindrical homogeneous water phantom. In 2000, a new version of this Monte Carlo code has been made available by the National Research Council of Canada (NRC), which includes various improvements in its electron-transport algorithms. In the present work, we were interested to see if the new physics in this version produces pencil beam dose distributions very different from those calculated with oldest one. The purpose of this study is to quantify as well as to understand these differences. We have compared a series of pencil beam dose distributions scored in cylindrical geometry, for electron energies between 1 MeV and 50 MeV calculated with two versions of the Electron Gamma Shower Monte Carlo Code. Data calculated and compared include isodose distributions, radial dose distributions and fractions of energy deposition. Our results for radial dose distributions show agreement within 10% between doses calculated by the two codes for voxels closer to the pencil beam central axis, while the differences are up to 30% for longer distances. For fractions of energy deposition, the results of the EGS4 are in good agreement (within 2%) with those calculated by EGSnrc at shallow depths for all energies, whereas a slightly worse agreement (15%) is observed at deeper distances. These differences may be mainly attributed to the different multiple scattering for electron transport adopted in these two codes and the inclusion of spin effect, which produces an increase of the effective range of electrons.     

Relation between Airy beams and triple-cusp beams

Airy beams and triple-cusp beams are two kinds of accelerating beams. The propagation characteristics and internal topological structures of accelerating Airy beams are well understood because of the developed mathematical theory about Airy function. However, limited information is available about the optical characteristics of accelerating triple-cusp beams. In this work, the relationship between Airy beams and triple-cusp beams is examined theoretically and experimentally. Results reveal some important optical characteristics of triple-cusp beams based on the optical characteristics of Airy beams. These findings are expected to provide a foundation for future applications of triple-cusp beams.