Sol–Gel SiO2-ZrO2 Coatings for Optical Applications

SiO₂-ZrO₂ based nanostructured multilayers films have been prepared by sol–gel processing from metallorganic precursors by low temperature inorganic polymerization reactions. Simultaneous gelation of both precursors was realized. Homogeneous and transparent films were obtained at room temperature by dip- and spin-coating on glass and silicon wafer substrates. Samples with successively deposited layers (1–3 layers) and successive thermal treatments have been also studied. Each deposited layer was thermally treated for 1 h at 300°C. The coatings were characterized by XRD, spectroellipsometry (SE), UV-VIS spectroscopy and AFM methods. The influence of substrates, number of coatings and number of thermal treatments on the optical and structural properties of the films was established. The thickness of three deposited SiO₂-ZrO₂ layers is about 496 nm on glass substrates and 413 nm on the silicon wafer substrate. The films deposited on glass are more porous than those deposited on silicon. The properties of optical waveguide prepared from SiO₂-ZrO₂ layers on silicon substrates will be discussed.     

Acoustooptic extension of the frequency tunability of CW CO2 lasers: New FIR lasers emissions from CH3OH and13CH3OH

We have increased the frequency tunability of our CW waveguide CO₂ lasers by means of an acoustooptic amplitude modulator, operating at the fixed frequency of 90 MHz. The up-shifted, or down-shifted, laser optical sideband can be generated independently by adjusting the orientation of the modulator. The efficiency is larger than 50%. The frequency tunability of the CO₂ laser around each laser line is thus increased by 180 MHz. To demonstrate the possibilities of this method, a source composed of the above modulator and of a CW, 300 MHz tunable waveguide CO₂ laser has been used for the search of new large offset FIR laser lines from optically pumped CH₃OH and¹³CH₃OH molecules. As a result 15 and 10 new large offset laser lines were discovered respectively. New assignments of some laser lines are also proposed. We have also measured the Stark effect, the offset, and the polarization of other already known lines. In particular a Stark effect frequency tuning of about 1 GHz is demonstrated for a laser line at 208.399 m.     

Study of adsorption of methylene blue and new methylene blue in liquid-solid interface by slab optical waveguide spectroscopy

A slab optical waveguide (SOWG) has been used for study of adsorption of both methylene blue (MB) and new methylene blue (NMB) in liquid–solid interface. Adsorption characteristics of MB and NMB on both bare SOWG and silanized SOWG by octadecyltrichlorosilane (ODS) were compared. Effect of pH on adsorption on MB and NMB was investigated. Binding rate constant analysis showed that both MB and NMB on bare SOWG demonstrates larger association constants than those on ODS-SOWG. Interactions of MB and NMB on bare SOWG and ODS-SOWG were analyzed by molecular mechanics calculation method. The binding energy change was in the following order: E_NMB–bare > E_MB–bare > E_NMB–ODS > E_MB–ODS.     

Optoacoustic Laser Stark spectroscopy and FIR laser action on CH3Br using a waveguide CO2 laser

The optoacoustic spectrum of CH₃Br around 10 m band lines of a tunable cw waveguide CO₂ laser is investigated. Several new infrared absorptions are observed and most of the correspond ing molecular transitions are assigned. Far infra red laser action is reported by pumping with the same CO₂ laser: pump offsets are given using the Transferred Lambs dip (TLD) technique. A new FIR laser emission is obtained and assigned. An optoacoustic Laser Stark spectroscopy technique is used to investigate off resonance infrared tran sitions.     

Hyphenation of column liquid chromatography and Raman spectroscopy via a liquid-core waveguide: chemometrical elimination of spectral eluent background

In column liquid chromatography (LC) coupled to conventional Raman spectroscopy (RS) removal of the spectral background of the eluent is often demanding, because of the strong signals of the organic modifier. A new chemometrical method is proposed, called the eluent background subtraction (EBS) method, which can correct for small shape and intensity differences of the eluent spectra. The variations in the eluent spectra are modelled using principal component analysis (PCA). The PCA loading vectors are subsequently used for eluent background correction of the elution spectra of the analyte. The loading vectors are fitted under these spectra by an asymmetric least-squares method. This method was successfully applied under various experimental conditions and performed much better than conventional background correction methods. Analyte detectability was improved by (weighted) averaging of all elution spectra and smoothing via a p-spline function.     

Propagating surface plasmon polaritons for remote excitation surface-enhanced Raman scattering spectroscopy

To illustrate the attractive potentials of remote-excitation surface enhanced Raman scattering (RE-SERS), we review the fundamental concepts and typical applications of propagating surface plasmon polaritons (PSPPs). Based on the RE-SERS technic, the adsorbed molecules are protected from being directly illuminated, while the merits of SERS still remained. However, the critical limitations of applying RE-SERS hinder its rapid development. Hence, drawing an overview about the PSPPs would be beneficial for further promoting the significance of RE-SERS in biological application and investigating the mechanism of surface catalytic reactions.     

Accurate Measurement of a Small Defect in a Planar Waveguide

Abstract

A non-destructive test method of a small defect (a dust particle or an air bubble) in a strongly confined planar waveguide is demonstrated in this work. Based on strong resonances between the small defect and some special incident wavelengths, an accurate reconstruction of the defect parameters can quickly be obtained from our previous numerical method. An example is given to verify the validity of the present measurement method.     

Generation of NOON States in Waveguide Arrays

A method to generate NOON states with three photons by injecting photons in an array of three waveguides is presented. Conditional measurements project the wave function in a given (desired) state. In passing, it is shown how the array of three waveguides, that effectively reproduces the interaction of three fields, may be reduced to the interaction of two fields.