Detection of ethanol in human body fluids by headspace solid-phase micro extraction (SPME)/capillary gas chromatography

Summary Ethanol has been found extractable from human whole blood and urine samples by headspace solid-phase micro extraction (SPME) with a Carbowax/divinylbenzene-coated fiber. After heating a vial containing the body fluid sample with ethanol, and isobutanol as internal standard (IS) at 70°C in the presence of (NH₄)₂SO₄, a Carbowax/divinylbenzene-coated SPME fiber was exposed in the headspace of the vial to allow adsorption of the compounds. The fiber needle was then injected into a middle-bore capillary gas chromatography (GC) port. The headspace SPME-GC gave intense peaks for both compounds; a small amount of background noises appeared, but did not interfere with the detection of the compounds. Recoveries of ethanol and IS were 0.049 and 0.026% for whole blood, respectively, and 0.054 and 0.085% for urine, respectively. The calibration curves for ethanol showed excellent linearity in the range of 80–5000 mg L^–1 for whole blood and 40–5000 mg L^–1 for urine; the detection limits for both samples were 20 and 10 mg L^–1, respectively. The data on actual determination of ethanol after the drinking of beer are also presented for two subjects.     

Sampling and sample-preparation strategies based on solid-phase microextraction for analysis of indoor air

Applications of solid-phase microextraction (SPME) to the sampling and analysis of volatile organic compounds in indoor air are reviewed, including a summary of quantification methods, coatings, compounds, concentrations, sampling locations and times, and detection limits. Strategies for on-site and off-site sampling and analysis, advantages and challenges associated with SPME for air sampling are discussed.     

Practical capillary gas chromatography—a systematic approach

Capillary gc is now rapidly expanding. Naturally, initiation is most often attempted on the basis of the experience acquired with packed columns. However, such an extrapolation is successful only if a number of essential peculiarities of capillary gc are considered. Based on practical examples this paper discusses six essential details: 1) design and maintenance of the gas flow paths, 2) the greatly increased importance of sampling technique, which should not be confined just to stream splitting, 3) the problems in quantitative analysis arising from small sample size, 4) specific sources of trouble related to small amounts of liquid phase, 5) specific arguments for the choice of the carrier gas, clearly pointing to hydrogen as the ideal carrier and, 6) the different way to approach column production. Figures for all selected examples are given.     

火焰原子吸收光谱法测定茶叶中的锰

介绍悬浮液进样-次灵敏线火焰原子吸收光谱法测定茶叶中的锰的方法。以琼脂为悬浮剂，将茶叶样品均匀、稳定地悬浮于琼脂溶胶中，直接喷入空气-乙炔火焰中，利用锰280.1nm次灵敏线，以工作曲线或标准加入法测定锰的含量，方法简便、快速，用于测定茶叶和桃叶样品中的锰，结果准确。     

表面起伏光栅形成速率的影响规律 Ⅰ.偶氮生色团种类和官能度的影响

设计并合成了含有不同生色团以及不同官能度的环氧树脂基偶氮高分子 ,系统研究了偶氮生色团的种类和官能度对光栅形成速率的影响规律 .实验结果表明 ,偶氮苯对位是羧基的聚合物的光栅形成速率明显快于偶氮苯对位是硝基的聚合物 ,光栅形成速率随偶氮生色团官能度的增加而加快 .这两类聚合物都可以形成规整的可擦式表面起伏光栅     

Simultaneous quantitative measurement of a new platelet activating factor antagonist (BN 50730) and its two main metabolites in human plasma and urine by LC-MS

Summary A simple and sensitive assay has been developed for the quantitative measurement of a new platelet activating factor antagonist (BN50730), and its two main metabolites (BN50727 and BN50922), at the picomole level in human plasma and urine. The three compounds of interest and the internal standard (BN50765) were measured by combined LC-negative chemical ionization MS. A simple solid-liquid extraction procedure was used to isolate the parent drug and the two metabolites. The MS was tuned to monitor the intense ionm/z 333 generated in the ion source by a dissociative capture process. The assay was on 1 ml plasma or 0.1 ml urine and the quantitation limit was calculated as 1 ng·ml^–1. The very low relative standard deviations and mean percentages of error calculated for within-day or between-day repeatability assays demonstrate the ruggedness of the technique for routine determination in biological fluids. Some preliminary results on the pharmacokinetics of the parent drug and its two main metabolites illustrate the applicability of this method.     

Freon (CHF<Subscript>3</Subscript>)-assisted atomization for the determination of titanium using ultrasonic slurry sampling–graphite furnace atomic absorption spectrometry (USS–GFAAS): a simple and advantageous method for solid samples

A simple and advantageous method for the determination of titanium using graphite furnace atomic absorption spectrometry with slurry sampling has been developed. Titanium is one of the refractory elements that form thermally stable carbides in the graphite tube, which leads to severe memory effects. Trifluoromethane (Freon-23) was applied in the purge gas during the atomization step or alternatively just prior to the atomization to successfully eliminate the problems of carbide formation and increase the lifetime of the furnace tube which could be used for more than 600 heating cycles. A flow rate of 40 mL min^–1 (5% of Freon in argon) was used to obtain symmetrical peaks with no tailing. However, when the gas flow rate was too high (250 mL min^–1) the peak-tailing and memory effects reappeared. Ti was determined in various materials covering a wide range of concentrations, from 2.8 g g^–1 to 12% (m/m) Ti. The accuracy of the method was confirmed by analyzing certified reference materials (CRMs) or by comparing the results with those obtained using inductively coupled plasma–atomic emission spectrometry (ICP–AES) after decomposition of the samples. The materials analyzed were soil, plant, human hair, coal, urban particulate matters, toothpaste, and powdered paint.     

An open optimization problem in statistical quality control

We ask the experts in global optimization if there is an efficient solution to an optimization problem in acceptance sampling: Here, one often has incomplete prior information about the quality of incoming lots. Given a cost model, a decision rule for the inspection of a lot may then be designed that minimizes the maximum loss compatible with the available information. The resulting minimax problem is sometimes hard to solve, as the loss functions may have several local maxima which vary in an unpredictable way with the parameters of the decision rule.     

Headspace-gas chromatography: The influence of sample volume on analytical results

Summary The role of the volume of the sample and the sample vial in equilibrium headspace-gas chromatography is discussed. A new term, thesample phase fraction (_S) is introduced. It is shown that if the value of _S is kept constant, the vial's volume has no influence on the sensitivity of the headspace analysis (which is proportional to the concentration of the analyte in the headspace). In a given headspace sampling system, concentration of the compound of interest in the headspace (c _G ^* ) at equilibrium is related to the value of _S: a higher _S will increase c _G ^* . However, the influence is important only in the case of low distribution coefficients: in the case of higher distribution coefficients this influence is negligible. This conclusion is also true for small changes in the sample volume in duplicate analyses: exact reproducibility of the sample volume is important only in the case of low distribution coefficient values.