Optical characterization of high speed microscanners based on static slit profiling method

Optical characterization of high-speed microscanners is a challenging task that usually requires special high speed, extremely expensive camera systems. This paper presents a novel simple method to characterize the scanned beam spot profile and size in high-speed optical scanners under operation. It allows measuring the beam profile and the spot sizes at different scanning angles. The method is analyzed theoretically and applied experimentally on the characterization of a Micro Electro Mechanical MEMS scanner operating at 2.6 kHz. The variation of the spot size versus the scanning angle, up to ±15°, is extracted and the dynamic bending curvature effect of the micromirror is predicted.     

Identification of conjugation positions of urinary glucuronidated vitamin D3 metabolites by LC/ESI–MS/MS after conversion to MS/MS‐fragmentable derivatives

A liquid chromatography/electrospray ionization–tandem mass spectrometry‐based method was developed for the identification of the conjugation positions of the monoglucuronides of 25‐hydroxyvitamin D₃ [25(OH)D₃] and 24,25‐dihydroxyvitamin D₃ [24,25(OH)₂D₃] in human urine. The method employed derivatization with 4‐(4‐dimethylaminophenyl)‐1,2,4‐triazoline‐3,5‐dione to convert the glucuronides into fragmentable derivatives, which provided useful product ions for identifying the conjugation positions during the MS/MS. The derivatization also enhanced the assay sensitivity and specificity for urine sample analysis. The positional isomeric monoglucuronides, 25(OH)D₃‐3‐ and ‐25‐glucuronides, or 24,25(OH)₂D₃‐3‐, ‐24‐ and ‐25‐glucuronides, were completely separated from each other under the optimized LC conditions. Using this method, the conjugation positions were successfully determined to be the C3 and C24 positions for the glucuronidated 25(OH)D₃ and 24,25(OH)₂D₃, respectively. The 3‐glucuronide was not present for 24,25(OH)₂D₃, unlike 25(OH)D₃, thus we found that selective glucuronidation occurs at the C24‐hydroxy group for 24,25(OH)₂D₃.     

四川省市州经济发展差异的统计分析

采用因子分析研究四川省21市州之间的相关性,利用主因子计算出各个市州得分,以市州得分作为新变量进行集团排序,再将基于相对位置排序法引入到集团排序中,进而得到最终的市州分类结果,在统计分析的基础上对市州经济发展给出一些建议.     

水胁迫下典型盐生植被梭梭光谱特征分析

荒漠地区由于气候干燥，降水稀少，水分常成为制约植被生长的因素之一，水分胁迫对植物长势和产量的影响比任何其他胁迫都要大。随着高光谱技术的发展，国内外已有众多学者利用高光谱数据研究植被遭受胁迫作用，然而这些研究对象多集中于甜菜、棉花、玉米、水稻等作物，针对干旱区盐生植被遭受胁迫作用的研究较少。梭梭作为荒漠、半荒漠地区的典型盐生植被之一，具有极高的经济和生态效益。选择梭梭作为研究对象，培育一年生梭梭，并设置三个水分梯度，形成受不同水分量胁迫的梭梭。使用原始光谱、红边位置参数，结合植被指数及二维相关光谱研究其叶片光谱特征，为干旱区利用高光谱遥感监测盐生植被提供借鉴。结果表明：(1)分析梭梭叶片反射光谱曲线发现，在可见光至中红外各波段范围内，受不同水分量胁迫作用的梭梭叶片光谱反射率有显著差异。在可见光(350～610 nm)波段，各水分处理的梭梭叶片反射率依次为100 mL>500 mL>200 mL，这是由于100和200 mL水分促进梭梭内部叶绿素合成，使该波段反射率降低，而过多的水分(500 mL)对梭梭内部的叶绿素合成没有更大的促进作用。在红光区(611～738 nm)，随着水分量的增多，受不同水分量胁迫的梭梭叶片光谱反射率依次减小。在738～1 181和1 228～1 296 nm波段，受不同水分量胁迫作用的梭梭叶片光谱反射率为：200 mL>100 mL>500 mL；在1 182～1 227 nm波段，受不同水分量胁迫作用的梭梭叶片光谱反射率为：100 mL>200 mL>500 mL。这是由于植被细胞结构对近红外区域的反射率影响较大，因而受不同水分胁迫作用的梭梭叶片光谱反射率有显著差异。在1 300～1 365和1 392～1 800 nm波段，受各水分胁迫作用的梭梭叶片反射率为：100 mL>200 mL>500 mL。这表明在500 mL水分胁迫量范围内，水分越多，叶子的细胞液、细胞膜对水分的吸收能力越强，使得反射率下降。通过对原始光谱求取一阶导数并提取红边位置参数发现，各水分处理下的梭梭叶片一阶微分光谱曲线中红边位置未发生移动。这是由于梭梭在长期的干旱环境影响下，形成了特殊的适应机制，水分对其红边位置影响不敏感。(2)选取若干植被指数分析各水分处理下的梭梭光谱指数变化。当水分胁迫量由100 mL增至200 mL时，WI/NDWI，MSI和NDII指数值变化显著，可用于研究水分胁迫下梭梭的光谱特征。(3)使用二维相关光谱技术分析受各水分胁迫作用的梭梭光谱特征，得出在100 mL水分胁迫下，在536，643，1 219和1 653 nm波段处，吸收峰对水分的微扰敏感；在200 mL水分胁迫下，在846和1 083 nm波段处，吸收峰对水分的微扰敏感；在500 mL水分胁迫下，在835和1 067 nm波段处，吸收峰对水分的微扰敏感。总之，在近红外波段，与100 mL水分量相比，梭梭受200和500 mL水分量胁迫时，吸收峰对水分的微扰敏感度上升。由100 mL水分胁迫下梭梭的二维同步相关谱图可知，1 044和1 665 nm，1 072和903 nm，903和1 264 nm，1 230和1 061 nm波段处形成正交叉峰，表明这些波段处光谱强度随水分的干扰同时变化。     

反导火力单元空间杀伤区内拦截概率研究

拦截概率是评价反导作战效能的重要指标,对交战前任务规划至关重要。选取某一拦截弹建立其在空间的可达集区域,针对中段反导逆轨拦截情况,确立其在空间中的杀伤区。针对杀伤区内任一点可能为拦截点的情况,对某一来袭导弹的弹道轨迹,选取可拦截弧段上的理论拦截点,通过在选取不同高度上的理论拦截点上,调整拦截弹的发射位置,从而得到拦截点在杀伤区内不同高度,不同距离以及在不同的交汇角时对拦截概率的影响。为反导作战的阵地部署研究和交战策略提供了一定的参考。     

Étude de l?adhérence des joncs et des plats composite avec le béton par flexion (beam test)

The Near Surface Mounted (NSM) technique has been used in recent years for the strengthening of reinforced concrete beams. It involves the insertion of strips or rods of polymers reinforced with carbon fiber (CFRP) in the groove made previously in the concrete cover of corresponding surfaces, filled with epoxy adhesive for fixation. In order to characterize the bond behavior of the laminate and rods to concrete, an experimental work of pullout-bending tests was carried out. The pullout force at the laminate and the slip at the free and loaded end were measured. The influences of the concrete strength, the strength of the bond, and bond length on the bonding behavior between the three materials concrete, epoxy adhesive and CFRP were analyzed.     

Extreme beam attenuation in double-slit experiments: Quantum and subquantum scenarios

Combining high and low probability densities in intensity hybrids  , we study some of their properties in double-slit setups. In particular, we connect to earlier results on beam attenuation techniques in neutron interferometry and study the effects of very small transmission factors, or very low counting rates, respectively, at one of the two slits. We use a “superclassical” modeling procedure which we have previously shown to produce predictions identical with those of standard quantum theory. Although in accordance with the latter, we show that there are previously unexpected new effects in intensity hybrids for transmission factors below a?10⁻⁴$a?10^{-4}$, which can eventually be observed with the aid of weak measurement techniques. We denote these as quantum sweeper effects, which are characterized by the bunching together of low counting rate particles within very narrow spatial domains. We give an explanation of this phenomenology by the circumstance that in reaching down to ever weaker channel intensities, the nonlinear nature of the probability density currents becomes ever more important, a fact which is generally not considered–although implicitly present–in standard quantum mechanics.     

光学观测中太阳夹角的分析与计算

对影响光学观测效果的太阳夹角计算方法进行了研究。首先给出了太阳夹角的定义及计算公式。然后重点研究了太阳视位置的计算方法,比较了几种赤纬角计算方法,给出了一种改进的时角计算方法,实现了高精度的太阳视位置计算,并对其计算精度进行了分析。最后提出了在实际光学观测应用中的太阳夹角计算算法。实验表明,太阳视位置计算精度比传统数值近似方法高一个数量级,能够满足光学观测中太阳光照分析的需要。     

Negative refraction and imaging of acoustic waves in a two-dimensional square chiral lattice structure

The negative refraction behavior and imaging effect for acoustic waves in a kind of two-dimensional square chiral lattice structure are studied in this paper. The unit cell of the proposed structure consists of four zigzag arms connected through a thin circular ring at the central part. The relation of the symmetry of the unit cell and the negative refraction phenomenon is investigated. Using the finite element method, we calculate the band structures and the equi-frequency surfaces of the system, and confirm the frequency range where the negative refraction is present. Due to the rotational symmetry of the unit cell, a phase difference is induced to the waves propagating from a point source through the structure to the other side. The phase difference is related to the width of the structure and the frequency of the source, so we can get a tunable deviated imaging. This kind of phenomenon is also demonstrated by the numerical simulation of two Gaussian beams that are symmetrical about the interface normal with the same incident angle, and the different negative refractive indexes are presented. Based on this special performance, a double-functional mirror-symmetrical slab is proposed for realizing acoustic focusing and beam separation.     

Electron-induced Ti-rich surface segregation on SrTiO3 nanoparticles

Atomic surface structures of nanoparticles are of interest in catalysis and other fields. Aberration-corrected HREM facilitates direct imaging of the surfaces of nanoparticles. A remaining concern of surface imaging arises from beam damage. It is important to identify the intrinsic surface structures and the ones created by electron beam irradiation in TEM. In this study, we performed aberration-corrected HREM and EELS to demonstrate that TiO and bcc type Ti islands form due to intense electron irradiation. The formation of Ti-rich islands is in agreement with previous high temperature annealing experiments on the surfaces of SrTiO₃ single crystals.