对氟苯甲醛水杨酰腙镍(II)配合物的合成、表征及其晶体结构

A nickel(II) complex Ni(C₁₄H₁₀N₂O₂F)₂ was synthesized from p-fluorobenzaldehyde salicylhydrazone and Ni(CH₃COO)₂·4H₂O and crystallized by diffusion, the structure of which was characterized by IR spectrum, ¹H NMR, and X-ray single-crystal diffraction. The complex crystallizes in monoclinic space group C2/c with a=2.460 6(2) nm, b=0.774 1(1) nm, c=1.534 9(1) nm, β=122.300(1)°, and V=2.471 1(4), Z=8, D_c=1.541 g·cm^-3. We reported the IR, ¹H NMR, crystal structure. CCDC: 638652.     

Stereospecific syntheses of sex pheromones of the californian red scale and white peach scale (Homoptera:Diaspididae) based on 1,4-cis-hydrogenation of dienes

Stereospecific syntheses of (±)-3-methyl-6-isopropenyl-3(Z),9-decadien-1-yl acetate and (±)-3,9-dimethyl-6-isopropenyl-3(Z),9-decadien-1-yl propionate (the Racemoc forms of the pheromones of the scalesAonidiella aurantii andPseudaulascaspis pentagona) with a geometrical purity of the (Z)-trisubstituted double bond not lower than 99 % were performed. The key step in both syntheses was the 1,4-cis-hydrogenation of the corresponding ethyl 3-methyl-6-(1, 1-ethylenedioxyethyl)-2,4,9-decatrienoates catalyzed with chromium carbonyl complexes. These 2,4-dienes were obtained in five conventional steps including the alkylation of ethyl acetoacetate by the appropriate 1-bromo-3-butenes and the Horner-Emmons olefination of the corresponding -branched aldehydes.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 10, pp. 2026–2031, October, 1995.     

1—苯乙酰基—4—芳酰基氨基硫脲的合成及其在碱催化下的环化反应

1-酰基-4-芳基氨基硫脲类化合物在碱性条件下环化为具有广泛生物活性的3-取代基-4-芳基-1,2,4-三唑啉-5-硫酮的反应报道甚多,但1,4-位都含羰基的酰氨基硫脲在碱性条件下环化反应迄今报道较少。我们曾研究了1-[5-(α-萘)-2H-四唑-2-乙酰基]-4-芳酰基氨基硫脲和1-(α-萘乙酰基)-4-芳酰基氨基硫脲在碱催化下环化为3-取代基-4-芳酰基-1,2,4-三唑啉-5-硫酮的反应,它们在低浓度下均有一定的生物活性。本文研究了1-苯乙酰基-4-芳酰基氨基硫脲1_(a～m)在1mol/L K_2CO_3溶液催化下的环化反应,得到环化产物3-苄基-4-芳酰基-1,2,     

An improved cyclization protocol for the synthesis of diazabicyclo[4.3.0]alkanes

We have recently described the synthesis of diazabicyclo[4.X.0]alkanes and their use as ligands for the prostate specific membrane antigene (PSMA). The key step of our synthetic route toward these diazabicycloalkanes is an oxidative cleavage of a bicyclic diol moiety followed by the attack of a nitrogen nucleophile to the resulting intermediate bisaldehyde. We herein describe the mechanism of this ring closure and its stereochemical consequences. In addition, we report a convenient method for trapping intermediate bisaldehydes by Wittig reagents. This trapping allows the synthesis of 3,5-disubstituted proline derivatives, which are shown to be versatile precursors for functionalized diazabicycloalkane dipeptide mimetics.     

Synthesis and properties of novel fluoroalkyl end‐capped oligomers having adamantane units in the main chains via a radical process

Fluoroalkanoyl peroxides were reacted with adamantane in the presence of radical polymerizable monomers such as acrylic acid, acryloylmorpholine, and N,N‐dimethylacrylamide to afford fluoroalkyl end‐capped oligomers having adamantane units in the main chains via a radical process under very mild conditions. Thermal stability of these new fluorinated adamantane co‐oligomers thus obtained became higher than that of the corresponding fluorinated homo‐oligomers having no adamantane units. Interestingly, these fluorinated adamantane co‐oligomers exhibited good solubility in traditional organic solvents such as methanol, ethanol, tetrahydrofuran, chloroform, benzene, dimethylsulfoxide and N,N‐dimethylformamide including water, although the parent adamantane exhibited no solubility in water, methanol and dimethylsulfoxide. Furthermore, these adamantane co‐oligomers were able to reduce the surface tension effectively to form the nanometer size‐controlled self‐assembled fluorinated molecular aggregates. Copyright © 2005 John Wiley & Sons, Ltd.     

Open-access liquid chromatography/mass spectrometry in a drug discovery environment

The use of open-access mass spectrometry to monitor synthetic chemistry reactions, and also the integrity and purity of new chemical entities, has been a part of the medicinal chemist's tool-box for more than 5 years. Originally in our group at Wyeth Research there were two open-access methods available to the chemists, flow injection analysis (FIA) and liquid chromatography/mass spectrometry (LC/MS). The FIA method was approximately 3 min long, while the LC/MS method was approximately 20 min long (including an 8 min gradient). Within the first 2 years, the total number of open-access analyses increased by approximately 125%. It is interesting, however, that the number of LC/MS analyses increased by more than 285%. This is attributed to the fact that the chemists began using the LC/MS data to monitor reactions and also to check final product integrity and purity. In addition, the number of chemists performing parallel synthesis reactions has increased; thus, individual chemists can produce sample sets of up to 100 vials. This paper describes the implementation of new methodology, which accommodates the need for much faster run times and also the ability to acquire alternating positive and negative ion spectra within the same run. In addition, the instrument has been configured to e-mail the resulting processed data report to the submitting chemist. Several methods have been developed, including structure elucidation using in-source collision-induced dissociation (CID) and night-time analysis. The LC/MS methods for this system are described herein and are applicable to both industrial and academic synthetic chemistry optimization efforts.     

INTRAPARTICLE DIFFUSION EFFECTS IN FISCHER-TROPSCH SYNTHESIS Ⅰ. MODELING OF DIFFUSION AND REACTION

IntroductionCatal}ticrcactionsaffcctcdb}'diffosionaIlimitationincatal}'stporcshavcbccnextensive1}dcaltx`ithinlit.rat.rcll~5I.Scvcraltcchniqucsonthcspccialcase0fFischcr-Tropschs}'nthcsis(FTS)t\crcapplicdtocxplorcthebchaviorofthiscatal}ticrcactionundercxpcrimcntalandopcrationaIconditionsI3~5l.It`"ouldbeofvaluctoindicatchcrcthatthcseinvcstigationsx"ercmainl}'bascdonthesimplcstkineticsofthcfirstordcrinH2proposedbyAndersonl6]attheearIystages.However-thesetboents,striCtlyspeaking,areinvalidfor…     

配合物聚合反应研究──Ⅱ.以二氨基磺磷酸盐配合物合成聚脲

以二氨基磺酸盐配合物合成了一系列主链上合金属元素(Ca,Ni,Co,Cu)的聚脲聚合物。用IR和1HNMR对其结构进行了表征,以TG-DTA研究了其热性能,并讨论了金属元素种类及其含量对聚脲聚合物溶液粘度的影响。     

新型酰腙类荧光探针的合成及其对Al(Ⅲ)的传感性质

合成了两个酰腙类荧光探针1和2,在DMSO-H_2O(7∶3,体积比)体系中,两者分别在478 nm和460 nm处对Al~(3+)具有较好的荧光选择识别作用。Job's法、核磁滴定、质谱分析表明,探针1和2与Al~(3+)的配位比均为1∶2,且对Al~(3+)的检出限分别为9.58×10~(-8) mol/L和6.52×10~(-8) mol/L。同时提出了探针1和2对Al~(3+)的荧光传感机理。实际应用研究表明,探针1和2可用于河水和自来水中一定浓度范围内Al~(3+)的检测。     

Cu/SO42-/La2O3-ZrO2-Al2O3催化剂的制备及其对C3H6选择还原NO的催化性能

以Al₂O₃为基质，添加ZrO₂和La₂O₃，制成La₂O₃-ZrO₂-Al₂O₃复合载体，然后采用SO₄^2-进行改性，再负载上Cu²⁺，制备了铜基SO₄^2-改性的复合载体催化剂(Cu/SO₄^2-/La₂O₃-ZrO₂-Al₂O₃)。考察了它在富氧条件下对丙烯选择还原NO的催化性能，并借助XRD、SEM、TG、Py-IR、NH₃-TPD、FTIR和TPR等方法研究了Cu/SO₄^2-/La₂O₃-ZrO₂-Al₂O₃的结构和性能的关系。结果表明，ZrO₂的加入主要有利于提高催化剂的低温活性；La₂O₃的加入则主要有利于提高催化剂的热稳定性和还原性能；SO₄^2-能够与Zr形成螯合双配位结构，大幅度促使催化剂表面酸量增加并且酸性增强；因此，有效地提高了Cu/SO₄^2-/La₂O₃-ZrO₂-Al₂O₃在富氧条件下对丙烯选择还原NO的催化活性和水热稳定性。在无水条件下，Cu/SO₄^2-/La₂O₃-ZrO₂-Al₂O₃能使NO的最大转化率高达84.3%，即使在275 ℃ 10%水蒸气存在的情况下，仍能使NO的转化率高达81.2%。